Delfield SSHPT1-S, SSHPT2-S, SSHPT1-SH, SSHPT2-SH, SAHPT2-S General Manual

Delfield

™

®

Specication Line®

Self-Contained Solid Door Heated Pass-Thru

Models

One section Two section

SSHPT1-S SSHPT2-S Stainless exterior and interior full door

SSHPT1-SH SSHPT2-SH Stainless exterior and interior half door

SAHPT1-S SAHPT2-S Stainless exterior and aluminum interior full door

SAHPT1-SH SAHPT2-SH Stainless exterior and aluminum interior half door

SMHPT1-S SMHPT2-S Stainless front aluminum exterior and interior full door

SMHPT1-SH SMHPT2-SH Stainless front aluminum exterior and interior half door

Project ___ ____________________ ___________

Item _________________ ___________________

Quantity ________________ ________________

CSI Sec tion 11400

Approved ____________ ___________________

Date ____ ____________________ ____________

Specication Line®: Solid Door Heated Pass-Thru

SSHPT2-SH

Specifications

Exterior: SS and SA models shall have corrosion resistant stainless
steel exterior cabinet sides, front and shroud. SM models shall have
corrosion resistant aluminum on exterior cabinet sides and will have
stainless front and shroud. All units shall have the upper shroud
hinged with a gas assist stay open feature to provide easy access to
the refrigeration system.

Interior: Cabinet interior shall be corrosion resistant stainless steel
(SS models) or heavy gauge aluminum (SA and SM models). Bottom
and top surfaces shall be die stamped to provide radius corners and
recessed oor. Three wire shelves are provided per section, standard
shelves are chrome plated. Shelves rest on clips which are adjustable
on 1” increments on stainless steel pilasters axed to the cabinet
interior. Pilasters are removable without tools for cleaning. Mounted
to the interior ceiling, the interior incandescent light is controlled
automatically through a switch mounted in the hinge assembly to
protect against breakage. Door openings are protected with heavy
gauge stainless steel breaker strips. An air duct shall be mounted to
the ceiling assuring low velocity, even air movement throughout the
cabinet interior.

Doors: Exterior shall be corrosion resistant stainless steel. Interior
liner shall be stainless steel. Each door has two edge mount, self

Standard Features

Stainless steel interior and exterior (SS)

•
Stainless steel exterior, aluminum interior

•
(SA)
Aluminum interior and exterior, stainless

•
front (SM)
Built in door locks with heavy duty strikes

•
Recessed metal door handle

•
Exterior digital thermometer with high/low

•
temperature alarm
Easy to use electronic control

•
Easy access “ip up” shroud

•
High density foamed in place

•
environmentally friendly, Kyoto Protocol
Compliant, Non ODP (Ozone Depletion
Potential), Non GWP (Global Warming
Potential) polyurethane keeps energy costs
low
Three chrome plated wire shelves per section

•
6” adjustable stainless steel legs

•
Stainless steel breaker strips

•
Stainless steel interior door liner

•
Two year parts & labor warranty

•

closing, cam lift style hinges. Doors can be removed from the cabinet
without the use of tools. Metal door handle shall be recessed into the
door for easy grip without impacting aisle space. Keyed door lock is
mounted in the door next to the handle. Lock engages into a heavy
duty strike mounted to the cabinet face. Door gaskets are magnetic
and mount to the door snapping in place and are removable without
tools.

Heating system: Cabinets are designed to maintain temperatures
between 120ºF and 200ºF. Heating elements are helical shaped,
with tubular ns. High speed blower provides uniform airow in
the cabinet. Entire heating system is mounted to the exterior of the
cabinet ceiling, outside the food zone. It is assembled as one piece
and can be removed as one piece. Temperature is controlled by an
adjustable electronic thermostat. System on/o switch is located on
the front exterior of the cabinet.

Electrical: Standard electrical is 120/208-240 Volt, 60 Hz single phase.
Connection must be hard wired to junction box on the exterior top
of the cabinet.

Options &
Accessories

•

•

•

•

•

•

•

•

•

•

•

•

Security (prison) package
6” polyurethane casters
Door eld rehingability
Additional shelves
Tray slides
Laminate on front, sides and back
Bottom mount electrical
Stainless steel banking strip
Heat shield end
Stainless steel kick plate
Laminate kick plate
4” stainless steel utility base

980 S. I sabella Rd.
Mt. Pleasa nt, Michigan 4885 8

Phone: [phone] or 989 -773-7981
Fax: [phone]

www.delfield.co m

Delfield

™

®

PLAN VIEW

SPECIFICATION LINE

SPECIFICATION LINE

SPECIFICATION LINE

SPECIFICATION LINE

56.00”

142.2cm

52.00"

132.1cm

36.25”

92.1cm

31.00"

78.7cm

58.00"

147.3cm

6.12”

15.5cm

81.12”

206.0cm

75.00”

190.5cm

29.00”

73.7cm

36.25”

92.1cm

25.00"

63.5cm

SSHPT1-S, SAHPT1-S, SMHPT1-S

SSHPT1-SH, SAHPT1-SH, SMHPT1-SH

PLAN VIEW

SSHPT2-S, SAHPT2-S, SMHPT2-S

SSHPT2-SH, SAHPT2-SH, SMHPT2-SH

Self-Contained Solid Do or Heated Pass-Thru

ELEVATION VIEW

SSHPT1-S, SAHPT1-S,

SMHPT1-S

ELEVATION VIEW

SSHPT1-SH, SAHPT1-SH,

SMHPT1-SH

ELEVATION VIEW

SSHPT2-S, SAHPT2-S,

SMHPT2-S

Mechanical Data

MODEL NUMBER VOLTAGE AMPS

SSHPT1-S, SSHPT1-SH,

SAHPT1-S, SAHPT1-SH,

120/208-240 9.0 26.96 12.81 3 N/A N/A

SMHPT1-S, SMHPT1-SH

SSHPT2-S, SSHPT2-SH,

SAHPT2-S, SAHPT2-SH,

Specication Line®

Deleld reserves the right to make changes to the design or specications without prior notice.

SMHPT2-S, SMHPT2-SH

980 S. I sabella Rd.
Mt. Pleasa nt, Michigan 4885 8

120/208-240 16.0 51.92 27.54 6 N/A N/A

Phone: [phone] or 989 -773-7981
Fax: [phone]
www.delfield.co m

STORAGE

CU.FT.

SHELVES SQ.FT. NO. OF SHELVES UNIT H.P.

Printed in the U.S.A.
DSSSHPT
09/08

ELEVATION VIEW

SSHPT2-SH, SAHPT2-SH,

SMHPT2-SH

ALL SECTION UNITS

BTU/HR

SYSTEM CAP

WEIGHT

398lbs

(181kg)

650lbs

(295kg)

END VIEW

SHIP

NEMA

ENERGY

PLUG

(KWH)

N/A N/A

N/A N/A