Delfield SSH2N-S, SSH2N-SH, SMH2N-S, SMH2N-SH General Manual

Specication Line®

Self-Contained Solid Door Two-Section Narrow Heated Reach-In

Models

Full door Half door

SSH2N-S SSH2N-SH Stainless exterior and interior

SAH2N-S SAH2N-SH Stainless exterior and aluminum interior

SMH2N-S SMH2N-SH Stainless front aluminum exterior and interior

Project ___ ____________________ ___________

Item _________________ ___________________

Quantity ________________ ________________

CSI Sec tion 11400

Approved ____________ ___________________

Date ____ ____________________ ____________

Specication Line®: Solid Door Two Section Narrow Heated Reach-In

SSH2N-SH

Specifications

Exterior: SS and SA models shall have corrosion resistant stainless steel exterior cabinet sides, front and shroud. SM models shall have corrosion resistant aluminum on exterior cabinet sides and will have stainless front and shroud. All units shall have the upper shroud hinged with a gas assist stay open feature to provide easy access to the refrigeration system.

Interior: Cabinet interior shall be corrosion resistant stainless steel (SS models) or heavy gauge aluminum (SA and SM models). Bottom and top surfaces shall be die stamped to provide radius corners and recessed oor. Three wire shelves are provided per section, SA/SS standard shelves are chrome plated, SM standard shelves are epoxy coated. Shelves rest on clips which are adjustable on 1” increments on stainless steel pilasters axed to the cabinet interior. Pilasters are removable without tools for cleaning. Mounted to the interior ceiling, the interior incandescent light is controlled automatically through a switch mounted in the hinge assembly to protect against breakage. Door openings are protected with heavy gauge stainless steel breaker strips. An air duct shall be mounted to the ceiling assuring low velocity, even air movement throughout the cabinet interior.

Doors: Exterior shall be corrosion resistant stainless steel. Interior liner shall be stainless steel. Each door has two edge mount, self

Standard Features

Stainless steel interior and exterior (SS)

• Stainless steel exterior, aluminum interior

• (SA) Aluminum interior and exterior, stainless

• front (SM) Built in door locks with heavy duty strikes

• Recessed metal door handle

• Exterior digital thermometer with high/low

• temperature alarm Easy to use electronic control

• Easy access “ip up” shroud

• High density foamed in place

• environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane keeps energy costs low Three chrome plated wire shelves per section

• 6” adjustable stainless steel legs

• Stainless steel breaker strips

• Stainless steel interior door liner

• Two year parts & labor warranty

•

closing, cam lift style hinges. Doors can be removed from the cabinet without the use of tools. Metal door handle shall be recessed into the door for easy grip without impacting aisle space. Keyed door lock is mounted in the door next to the handle. Lock engages into a heavy duty strike mounted to the cabinet face. Door gaskets are magnetic and mount to the door snapping in place and are removable without tools.

Heating system: Cabinets are designed to maintain temperatures between 120ºF and 200ºF. Heating elements are helical shaped, with tubular ns. High speed blower provides uniform airow in the cabinet. Entire heating system is mounted to the exterior of the cabinet ceiling, outside the food zone. It is assembled as one piece and can be removed as one piece. Temperature is controlled by an adjustable electronic thermostat. System on/o switch is located on the front exterior of the cabinet.

Electrical: Standard electrical is 120/208-240 Volt, 60 Hz single phase. Connection must be hard wired to junction box on the exterior top of the cabinet.

Options & Accessories

•

Security (prison) package 6” polyurethane casters Door eld rehingability Additional shelves Stainless steel back Laminate on front, sides and back Bottom mount electrical Stainless steel banking strip Heat shield end Stainless steel kick plate Laminate kick plate 4” stainless steel utility base

980 S. I sabella Rd. Mt. Pleasa nt, Michigan 4885 8

Phone: 800 -733-8948 or 989 -773-7981 Fax: 800-669-0 619

www.delfield.co m

PLAN VIEW

48.00”

121.9cm

44.00"

111.8cm

34.00”

86.4cm

SPECIFICATION LINE

6.12”

15.5cm

81.12”

206.0cm

75.00”

190.5cm

58.00”

147.3cm

30.00”

76.2cm

ALL MODELS

Self-Contained Solid Do or Two Sec tion Narrow Hea ted Reach -In

ELEVATION VIEW

SSH2N-SH, SAH2N-SH, SMH2N-SH

ELEVATION VIEW

SSH2N-S, SAH2N-S, SMH2N-S

Mechanical Data

MODEL NUMBER VOLTAGE AMPS

Specication Line®

SSH2N-S, SSH2N-SH, SAH2N-S,

SAH2N-SH, SMH2N-S, SMH2N-SH

120/208-240 16.0 43.94 27.54 6 N/A N/A

Deleld reserves the right to make changes to the design or specications without prior notice.

980 S. I sabella Rd. Mt. Pleasa nt, Michigan 4885 8

Phone: 800 -733-8948 or 989 -773-7981 Fax: 800-669-0 619 www.delfield.co m

STORAGE

CU.FT.

SHELVES SQ.FT. NO. OF SHELVES UNIT H.P.

Printed in the U.S.A. DSSSHN 09/10

BTU/HR

SYSTEM CAP

SHIP

WEIGHT

588lbs

(267kg)

END VIEW

ALL MODELS

NEMA

PLUG

N/A N/A

ENERGY

(KWH)