Delfield SSH1-S, SSH2-S, SSH3-S, SSH1-SH, SSH2-SH General Manual
...
Specication Line®
Self-Contained Solid Door Heated Reach-In
Models
One section Two section Three section
SSH1-S SSH2-S SSH3-S Stainless exterior and interior full door
SSH1-SH SSH2-SH SSH3-SH Stainless exterior and interior half door
SAH1-S SAH2-S SAH3-S Stainless exterior and aluminum interior full door
SAH1-SH SAH2-SH SAH3-SH Stainless exterior and aluminum interior half door
SMH1-S SMH2-S SMH3-S Stainless front aluminum exterior and interior full door
SMH1-SH SMH2-SH SMH3-SH Stainless front aluminum exterior and interior half door
Project ___ ____________________ ___________
Item _________________ ___________________
Quantity ________________ ________________
CSI Sec tion 11400
Approved ____________ ___________________
Date ____ ____________________ ____________
Specication Line®: Solid Door Heated Reach-In
SSH2-SH
Specifications
Exterior: SS and SA models shall have corrosion resistant stainless
steel exterior cabinet sides, front and shroud. SM models shall have
corrosion resistant aluminum on exterior cabinet sides and will have
stainless front and shroud. All units shall have the upper shroud
hinged with a gas assist stay open feature to provide easy access to
the refrigeration system.
Interior: Cabinet interior shall be corrosion resistant stainless steel
(SS models) or heavy gauge aluminum (SA and SM models). Bottom
and top surfaces shall be die stamped to provide radius corners and
recessed oor. Three wire shelves are provided per section, standard
shelves are chrome plated. Shelves rest on clips which are adjustable
on 1” increments on stainless steel pilasters axed to the cabinet
interior. Pilasters are removable without tools for cleaning. Mounted
to the interior ceiling, the interior incandescent light is controlled
automatically through a switch mounted in the hinge assembly to
protect against breakage. Door openings are protected with heavy
gauge stainless steel breaker strips. An air duct shall be mounted to
the ceiling assuring low velocity, even air movement throughout the
cabinet interior.
Doors: Exterior shall be corrosion resistant stainless steel. Interior
liner shall be stainless steel. Each door has two edge mount, self
Standard Features
Stainless steel interior and exterior (SS)
•
Stainless steel exterior, aluminum interior
•
(SA)
Aluminum interior and exterior, stainless
•
front (SM)
Built in door locks with heavy duty strikes
•
Recessed metal door handle
•
Exterior digital thermometer with high/low
•
temperature alarm
Easy to use electronic control
•
Easy access “ip up” shroud
•
High density foamed in place
•
environmentally friendly, Kyoto Protocol
Compliant, Non ODP (Ozone Depletion
Potential), Non GWP (Global Warming
Potential) polyurethane keeps energy costs
low
Three chrome plated wire shelves per section
•
6” adjustable stainless steel legs
•
Stainless steel breaker strips
•
Stainless steel interior door liner
•
Two year parts & labor warranty
•
closing, cam lift style hinges. Doors can be removed from the cabinet
without the use of tools. Metal door handle shall be recessed into the
door for easy grip without impacting aisle space. Keyed door lock is
mounted in the door next to the handle. Lock engages into a heavy
duty strike mounted to the cabinet face. Door gaskets are magnetic
and mount to the door snapping in place and are removable without
tools.
Heating system: Cabinets are designed to maintain temperatures
between 120ºF and 200ºF. Heating elements are helical shaped,
with tubular ns. High speed blower provides uniform airow in
the cabinet. Entire heating system is mounted to the exterior of the
cabinet ceiling, outside the food zone. It is assembled as one piece
and can be removed as one piece. Temperature is controlled by an
adjustable electronic thermostat. System on/o switch is located on
the front exterior of the cabinet.
Electrical: Standard electrical is 120/208-240 Volt, 60 Hz single phase.
Connection must be hard wired to junction box on the exterior top
of the cabinet.
Options &
Accessories
•
•
•
•
•
•
•
•
•
•
•
•
•
Security (prison) package
6” polyurethane casters
Door eld rehingability
Additional shelves
Tray slides
Stainless steel back
Laminate on front, sides and back
Bottom mount electrical
Stainless steel banking strip
Heat shield end
Stainless steel kick plate
Laminate kick plate
4” stainless steel utility base
980 S. I sabella Rd.
Mt. Pleasa nt, Michigan 4885 8
Phone: 800 -733-8948 or 989 -773-7981
Fax: 800-669-0 619
www.delfield.co m
PLAN VIEW
29.00”
73.7cm
34.00”
86.4cm
25.00"
63.5cm
56.00”
142.2cm
52.00"
132.1cm
34.00”
86.4cm
83.00”
210.8cm
79.00"
200.7cm
34.00”
86.4cm
SPECIFICATION LINE
SPECIFICATION LINE
SPECIFICATION LINE
SPECIFICATION LINE
SPECIFICATION LINE
SPECIFICATION LINE
6.12”
15.5cm
81.12”
206.0cm
75.00”
190.5cm
58.00”
147.3cm
30.00”
76.2cm
SSH1-S, SAH1-S, SMH1-S
SSH1-SH, SAH1-SH, SMH1-SH
PLAN VIEW
SSH2-S, SAH2-S, SMH2-S
SSH2-SH, SAH2-SH, SMH2-SH
PLAN VIEW
SSH3-S, SAH3-S, SMH3-S
SSH3-SH, SAH3-SH, SMH3-SH
ELEVATION VIEW
SSH1-S, SAH1-S, SMH1-S
ELEVATION VIEW
SSH1-SH, SAH1-SH, SMH1-SH
ELEVATION VIEW
SSH2-S, SAH2-S, SMH2-S
ELEVATION VIEW
SSH2-SH, SAH2-SH, SMH2-SH
Self-Contained Solid Do or Heated Reach-In
ELEVATION VIEW
SSH3-S, SAH3-S, SMH3-S
ELEVATION VIEW
SSH3-SH, SAH3-SH, SMH3-SH
END VIEW
ALL SECTION UNITS
Mechanical Data
MODEL NUMBER VOLTAGE AMPS
SSH1-S, SSH1-SH, SAH1-S,
SAH1-SH, SMH1-S, SMH1-SH
SSH2-S, SSH2-SH, SAH2-S,
SAH2-SH, SMH2-S, SMH2-SH
SSH3-S, SSH3-SH, SAH3-S,
SAH3-SH, SMH3-S, SMH3-SH
980 S. I sabella Rd.
Mt. Pleasa nt, Michigan 4885 8
Specication Line®
Deleld reserves the right to make changes to the design or specications without prior notice.
120/208-240 9.0 24.96 12.81 3 N/A N/A
120/208-240 16.0 51.92 27.54 6 N/A N/A
120/208-240 17.8 78.89 42.47 9 N/A N/A
Phone: 800 -733-8948 or 989 -773-7981
Fax: 800-669-0 619
www.delfield.co m
STORAGE
CU.FT.
SHELVES SQ.FT. NO. OF SHELVES H.P.
Printed in the U.S.A.
DSSSH
07/10
BTU/HR
SYSTEM CAP
SHIP
WEIGHT
418lbs
(190kg)
650lbs
(295kg)
830lbs
(376kg)
NEMA
ENERGY
PLUG
(KWH)
N/A N/A
N/A N/A
N/A N/A
Loading...