Delfield SSFRI1-S, SSFRI2-S, SSFRI3-S, SAFRI2-S, SAFRI3-S General Manual
...
Specication Line®
Self-Contained Solid Door Roll-In Freezer
Models
One section Two section Three section
SSFRI1-S SSFRI2-S SSFRI3-S Stainless exterior and interior full door
SAFRI1-S SAFRI2-S SAFRI3-S Stainless exterior and aluminum interior full door
SMFRI1-S SMFRI2-S SMFRI3-S Stainless front aluminum exterior and interior full door
Project ___ ____________________ ___________
Item _________________ ___________________
Quantity ________________ ________________
CSI Sec tion 11400
Approved ____________ ___________________
Date ____ ____________________ ____________
Specication Line®: Solid Door Roll-In Freezer
SSFRI2-S
Specifications
Exterior: SS and SA models shall have corrosion resistant stainless
steel exterior cabinet sides, front and shroud. SM models shall have
corrosion resistant aluminum on exterior cabinet sides and will have
stainless front and shroud. All units shall have the upper shroud
hinged with a gas assist stay open feature to provide easy access to
the refrigeration system.
Interior: Cabinet interior shall be corrosion resistant stainless steel
(SS models) or heavy gauge aluminum (SA and SM models). Bottom
and top surfaces shall be die stamped to provide radius corners
and recessed oor. Mounted to the interior ceiling, the interior
incandescent light is controlled automatically through a switch
mounted in the hinge assembly to protect against breakage. Door
openings are protected with heavy gauge stainless steel breaker
strips. An air duct shall be mounted to the ceiling assuring low
velocity, even air movement throughout the cabinet interior.
Each section can accommodate a 28 1/2” x 27 1/4” x 72” cart.
Doors: Exterior shall be corrosion resistant stainless steel. Interior
liner shall be resilient high impact ABS material formed to protrude
beyond the door gasket to protect the gasket from tearing. Each
door has two edge mount, self closing, cam lift style hinges. Doors
can be removed from the cabinet without the use of tools. Metal
door handle shall be recessed into the door for easy grip without
impacting aisle space. Keyed door lock is mounted in the door next
Standard Features
Stainless steel interior and exterior (SS)
•
Stainless steel exterior, aluminum interior
•
(SA)
Aluminum interior and exterior, stainless
•
front (SM)
Built in door locks with heavy duty strikes
•
Recessed metal door handle
•
Pressure relief valve is standard to prevent
•
door vapor lock
Exterior digital thermometer with high/
•
low temperature alarm
Easy to use electronic control
•
Easy access “ip up” shroud
•
Tough ABS interior door liners
•
10’ attached cord and plug on 115V units
•
Stainless steel breaker strips
•
High density foamed in place
•
environmentally friendly, Kyoto Protocol
Compliant, Non ODP (Ozone Depletion
Potential), Non GWP (Global Warming
Potential) polyurethane keeps energy
costs low
Energy savings door heater switch
•
Two year parts & labor warranty
•
Five year compressor warranty
•
to the handle. Lock engages into a heavy duty strike mounted to
the cabinet face. Door gaskets are magnetic and mount to the door
snapping in place and are removable without tools.
Refrigeration system: All components are mounted to the exterior
of the cabinet ceiling, outside the food zone and are assembled
as one piece and can be removed as one piece. Environmentally
friendly R404A refrigerant is used. The system has the capability
of maintaining between -5ºF and 0ºF in heavy use food service
operations. Refrigerant is metered using a highly responsive
thermostatic expansion valve. System is controlled using Deleld’s
ACT-Advanced Control Technology electronic temperature control,
which provides improved pull down times, reduces compressor
cycling and longer compressor life with lower energy consumption.
Control system uses adaptive defrost to assure evaporator coil is free
of ice and is operating at optimum eciency. Evaporator condensate
is eliminated using an energy ecient hot gas system.
Electrical: Standard electrical on one section units shall be 115V, 60
Hz single phase. A 10’ cord and plug is supplied and attached to a
junction box mounted on the exterior top of the cabinet. Two and
three section units shall be 115/208-230 and will require hardwire
connections.
Options &
Accessories
•
•
•
•
•
•
•
•
•
•
Security (prison) package
Door eld rehingability
Stainless steel interior door liner
Stainless steel back
Laminate on front, sides and back
Bottom mount electrical
Stainless steel banking strip
Heat shield end
230-50-1 electrical
220-60-1 electrical
980 S. I sabella Rd.
Mt. Pleasa nt, Michigan 4885 8
Phone: 800 -733-8948 or 989 -773-7981
Fax: 800-669-0 619
www.delfield.co m
PLAN VIEW
34.00”
86.4cm
34.00”
86.4cm
30.00”
76.2cm
66.00”
167.6cm
34.00”
86.4cm
62.00”
157.5cm
98.00”
248.9cm
34.00”
86.4cm
94.00”
238.8cm
SPECIFICATION LINE
SPECIFICATION LINE
SPECIFICATION LINE
30.00"
76.2cm
72.00"
182.9cm
89.00”
226.1cm
CONDENSING UNIT
89.88”
228.3cm
72.00”
182.9m
30.00”
76.2cm
CONDENSING UNIT
90.30”
229.4cm
72.00”
182.9m
30.00”
76.2cm
SSFRI1-S, SAFRI1-S, SMFRI1-S
PLAN VIEW
SSFRI2-S, SAFRI2-S, SMFRI2-S
PLAN VIEW
SSFRI3-S, SAFRI3-S, SMFRI3-S
ELEVATION VIEW
SSFRI1-S, SAFRI1-S, SMFRI1-S
ELEVATION VIEW
SSFRI2-S, SAFRI2-S, SMFRI2-S
ELEVATION VIEW
SSFRI3-S, SAFRI3-S, SMFRI3-S
Self-Contained Solid Do or Roll-In Freezer
END VIEW
1 SECTION UNITS
Mechanical Data
MODEL NUMBER VOLTAGE AMPS
SSFRI1-S, SSFRI1-SH, SAFRI1-S
Specication Line®
SSFRI2-S, SSFRI2-SH, SAFRI2-S
SSFRI3-S, SSFRI3-SH, SAFRI3-S
Deleld reserves the right to make changes to the design or specications without prior notice.
980 S. I sabella Rd.
Mt. Pleasa nt, Michigan 4885 8
115 7.8 36.15 N/A N/A 1/2 1516
115/208-230 10.0 74.12 N/A N/A 1 4793
115/208-230 11.8 113.28 N/A N/A 1-1/2 5394
Phone: 800 -733-8948 or 989 -773-7981
Fax: 800-669-0 619
www.delfield.co m
END VIEW
2 SECTION UNITS
STORAGE
CU.FT.
SHELVES SQ.FT.
Printed in the U.S.A.
DSSSFRI
05/10
NO. OF
SHELVES
UNIT H.P.
BTU/HR
SYSTEM CAP
END VIEW
3 SECTION UNITS
SHIP
WEIGHT
497lbs
(225kg)
824lbs
(374kg)
1128lbs
(512kg)
NEMA
ENERGY
PLUG
(KWH)
5-15P 11.57
N/A 21.02
N/A 25.70
Loading...