Delfield SSFPT-S User Manual

Delfield

™

®

Specication Line®

Self-Contained Solid Door Pass-Thru Freezer

Models

One section Two section Three section

SSFPT1-S SSFPT2-S SSFPT3-S Stainless exterior and interior full door

SSFPT1-SH SSFPT2-SH SSFPT3-SH Stainless exterior and interior half door

SAFPT1-S SAFPT2-S SAFPT3-S Stainless exterior and aluminum interior full door

SAFPT1-SH SAFPT2-SH SAFPT3-SH Stainless exterior and aluminum interior half door

SMFPT1-S SMFPT2-S SMFPT3-S Stainless front aluminum exterior and interior full door

SMFPT1-SH SMFPT2-SH SMFPT3-SH Stainless front aluminum exterior and interior half door

Project ___ ____________________ ___________

Item _________________ ___________________

Quantity _________________ _______________

CSI Sec tion 11400

Approved ____________ ___________________

Date ____ _____________________ ___________

Specication Line®: Solid Door Pass-Thru Freezer

SSFPT2-SH

Specifications

Exterior: SS and SA models shall have corrosion resistant stainless
steel exterior cabinet sides, front and shroud. SM models shall have
corrosion resistant aluminum on exterior cabinet sides and will have
stainless front and shroud. All units shall have the upper shroud
hinged with a gas assist stay open feature to provide easy access to
the refrigeration system.

Interior: Cabinet interior shall be corrosion resistant stainless steel
(SS models) or heavy gauge aluminum (SA and SM models). Bottom
and top surfaces shall be die stamped to provide radius corners and
recessed oor. Three wire shelves are provided per section, SA/SS
standard shelves are chrome plated, SM standard shelves are epoxy
coated. Shelves rest on clips which are adjustable on 1” increments
on stainless steel pilasters axed to the cabinet interior. Pilasters are
removable without tools for cleaning. Mounted to the interior ceiling,
the interior incandescent light is controlled automatically through a
switch mounted in the hinge assembly to protect against breakage.
Door openings are protected with heavy gauge stainless steel
breaker strips. An air duct shall be mounted to the ceiling assuring
low velocity, even air movement throughout the cabinet interior.

Doors: Exterior shall be corrosion resistant stainless steel. Interior
liner shall be resilient high impact ABS material formed to protrude
beyond the door gasket to protect the gasket from tearing. Each
door has two edge mount, self closing, cam lift style hinges. Doors
can be removed from the cabinet without the use of tools. Metal

Standard Features

Stainless steel interior and exterior (SS)

•
Stainless steel exterior, aluminum interior (SA)

•
Aluminum interior and exterior, stainless front

•
(SM)
Built in door locks with heavy duty strikes

•
Recessed metal door handle

•
Pressure relief valve is standard to prevent door

•
vapor lock
Exterior digital thermometer with high/low

•
temperature alarm
Easy to use electronic control

•
Easy access “ip up” shroud

•
Three wire shelves per section - SA/SS standard

•
with chrome plated shelves and SM standard
with epoxy coated shelves
Tough ABS interior door liners

•
10’ attached cord and plug on 115V units

•
6” adjustable stainless steel legs

•
Stainless steel breaker strips

•
High density foamed in place environmentally

•
friendly, Kyoto Protocol Compliant, Non ODP
(Ozone Depletion Potential), Non GWP (Global
Warming Potential) polyurethane keeps energy
costs low
Energy savings door heater switch

•
Two year parts & labor warranty

•
Five year compressor warranty

•

door handle shall be recessed into the door for easy grip without
impacting aisle space. Keyed door lock is mounted in the door next
to the handle. Lock engages into a heavy duty strike mounted to
the cabinet face. Door gaskets are magnetic and mount to the door
snapping in place and are removable without tools.

Refrigeration system: All components are mounted to the exterior
of the cabinet ceiling, outside the food zone and are assembled
as one piece and can be removed as one piece. Environmentally
friendly R404A refrigerant is used. The system has the capability
of maintaining between -5ºF and 0ºF in heavy use food service
operations. Refrigerant is metered using a highly responsive
thermostatic expansion valve. System is controlled using Deleld’s
ACT-Advanced Control Technology electronic temperature control,
which provides improved pull down times, reduces compressor
cycling and longer compressor life with lower energy consumption.

Control system uses adaptive defrost to assure evaporator coil is free
of ice and is operating at optimum eciency. Evaporator condensate
is eliminated using an energy ecient hot gas system.

Electrical: Standard Electrical on one section units shall be 115V, 60
Hz single phase. A 10’ cord and plug is supplied and attached to a
junction box mounted on the exterior top of the cabinet. Two and
three section units shall be 115/208-230 and will require hardwire
connections.

Options &
Accessories

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Security (prison) package
6” polyurethane casters
Door eld rehingability
Stainless steel interior door liner
Additional shelves
Tray slides
Laminate on front, sides and back
Bottom mount electrical
Stainless steel banking strip
Heat shield end
Stainless steel kick plate
Laminate kick plate
4” stainless steel utility base
230-50-1 electrical
220-60-1 electrical

980 S. I sabella Rd.
Mt. Pleasa nt, Michigan 4885 8

Phone: [phone] or 989 -773-7981
Fax: [phone]

www.delfield.co m

Delfield

™

®

30"

58"

6.12

81.12

29.00”

73.7cm

34.00”

86.4cm

56.00”

142.2cm

83.00”

210.8cm

SPECIFICATION LINE SPECIFICATION LINE SPECIFICATION LINE

25.00"

63.5cm

52.00"

132.1cm

79.00"

200.7cm

34.00”

86.4cm

34.00”

86.4cm

48.00”

121.9cm

44.00"

111.8cm

34.00”

86.4cm

30.00"

76.2cm

58.00"

147.3cm

6.12”

15.5cm

81.12”

205.0cm

29.00

34.00

56.00

34.00

83.00

34.00

SPECIFICATION LINE SPECIFICATION LINE SPECIFICATION LINE

75.00”

190.5cm

56.00”

142.2cm

83.00”

210.8cm

52.00"

132.1cm

79.00"

200.7cm

34.00”

86.4cm

34.00”

86.4cm

56.00

34.00

83.00

34.00

83.00

34.00

83.00”

210.8cm

79.00"

200.7cm

34.00”

86.4cm

31.00"

78.7cm

58.00"

147.3cm

6.12”

15.5cm

81.12”

206.0cm

56.00”

142.2cm

83.00”

210.8cm

52.00"

132.1cm

79.00"

200.7cm

36.25”

92.1cm

36.25”

92.1cm

75.00”

190.5cm

29.00”

73.7cm

36.25”

92.1cm

56.00”

142.2cm

83.00”

210.8cm

25.00"

63.5cm

52.00"

132.1cm

79.00"

200.7cm

36.25”

92.1cm

36.25”

92.1cm

56.00”

142.2cm

83.00”

210.8cm

52.00"

132.1cm

79.00"

200.7cm

36.25”

92.1cm

36.25”

92.1cm

83.00”

210.8cm

79.00"

200.7cm

36.25”

92.1cm

CONDENSING UNIT

CONDENSING UNIT

CONDENSING UNIT

6.12

89.88”

228.3cm

89.88

6.12”

15.5cm

82.30”

209.0cm

75.00”

190.5cm

58.00”

147.3cm

31.00”

78.7cm

72.00”

182.9m

30.00”

76.2cm

CONDENSING UNIT

6.12

81.87

6.12”

15.5cm

84.50”

214.6cm

75.00”

190.5cm

58.00”

147.3cm

31.00”

78.7cm

PLAN VIEW

SSFPT1-S, SAFPT1-S,

SMFPT1-S SSFPT1-SH,

SAFPT1-SH, SMFPT1-SH

ELEVATION VIEW

SSFPT1-S, SAFPT1-S,

Self-Contained Solid Do or Pass-Thru Freezer

SMFPT1-S

PLAN VIEW

SSFPT2-S, SAFPT2-S, SMFPT2-S

SSFPT2-SH, SAFPT2-SH, SMFPT2-SH

ELEVATION VIEW

SSFPT1-SH, SAFPT1-SH,

SMF1S-SH

ELEVATION VIEW

SSFPT2-S, SAFPT2-S, SMFPT2-S

SSFPT3-SH, SAFPT3-SH, SMFPT3-SH

PLAN VIEW

SSFPT3-S, SAFPT3-S, SMFPT3-S

ELEVATION VIEW

SSFPT2-SH, SAFPT2-SH, SMFPT2-SH

END VIEW

1 SECTION UNITS

END VIEW

2 SECTION UNITS

ELEVATION VIEW

SSFPT3-S, SAFPT3-S, SMFPT3-S

ELEVATION VIEW

SSFPT3-SH, SAFPT3-SH, SMFPT3-SH

Mechanical Data

STORAGE

MODEL NUMBER VOLTAGE AMPS

SSFPT1-S, SSFPT1-SH, SAFPT1-S,

Specication Line®

SAFPT1-SH, SMFPT1-S, SMFPT1-SH

SSFPT2-S, SSFPT2-SH, SAFPT2-S,

SAFPT2-SH, SMFPT2-S, SMFPT2-SH

SSFPT3-S, SSFPT3-SH, SAFPT3-S,

SAFPT3-SH, SMFPT3-S, SMFPT3-SH

Deleld reserves the right to make changes to the design or specications without prior notice.

980 S. I sabella Rd.
Mt. Pleasa nt, Michigan 4885 8

115 11.5 26.64 12.81 3 3/4 1923

115/208-230 10.0 55.42 27.54 6 1 4793

115/208-230 10.0 84.19 42.27 9 1 1/2 5185

Phone: [phone] or 989 -773-7981
Fax: [phone]
www.delfield.co m

CU.FT.

SHELVES

SQ.FT.

NO. OF

SHELVES

Printed in the U.S.A.
DSSSFPT
06/08

UNIT H.P.

BTU/HR

SYSTEM CAP

SHIP WEIGHT

672lbs

(305kg)

1001lbs
(454kg)

1268lbs
(575kg)

END VIEW

3 SECTION UNITS

NEMA

ENERGY

PLUG

(KWH)

5-15P 11.30

N/A 14.26

N/A 33.00