Shor t Form Specif icat ions
Exte rior to p is o ne-piece, 16 -gauge stainless steel, with integral 2.12 ”
(5.4c m) high square no sing on front. Top has a mechanically cooled refrigerated raised rail at rear with o penings to accom mo date 1/ 6 size pans. Pans and
adapter bars are provided by o thers. Pans are rec essed 3 ” (7.6c m) or 2 ”
(5.1c m) and set o n adjustable stainless steel pan suppo rts. Rail interior is 22gauge stainless steel. Raised rail openings have 20-gauge stainless steel removable lids. Unit is equipped w ith separate expansion valve and on/ off switch for
refrigerated rail. Temperature in top opening to maintain 33°F (1°C ) to 4 1° F
(5°C ), with pans rec essed 3 ” (7.6c m), at 86 °F ambient room tem perature,
meeting NSF7 requirements.
Exte rior Back and Botto m are 24 -gauge galvanized steel. Exterior ends are
finished w ith 18 -gauge galvanized steel.
Base Inte rior is 2 2-gauge stainless steel back and bottom. Base interior ends
and do or frames are thermo formed ABS plastic. Base is insulated w ith 1 .5 ”
(3.8c m) high density foamed in place polyurethane.
Door(s) have a 22 -gauge stainless steel exterior front, w ith thermo formed
ABS plastic interior liner, black rece ssed handle and snap in magnetic gasket
which is easily replaceable. Each interior doo r section has (1) removable
epoxy co ated w ire shelf.
Base has a blow er coil assembly w ith expansion valve loc ated behind doo r
mullion. Base is equipped w ith independently co ntrolled thermostat and solenoid valve. On/ off sw itch fo r unit is located behind the hinged panel.
Unit is mounted o n 6 .1 3” (15 .6cm) high adjustable stainless steel legs.
Electrical connections are 115 vo lt, 6 0 Hertz, single phase. Unit must be
hard wired.
Re frigeration Syste m Co mpone nts — HFC-404 A
PROJECT
ITEM #
QUANTITY DATE
APPROVAL
F18RR
31.5” (80cm) Deep Remote Reduced Height Rail
Mod el F18RR79
Opt ional Accessor ies & M odif icat ions
906 A Stainless steel end
505 H Stainless steel back
505 F Laminate facing (full front)
906 E Laminate end
905 A Laminate back
103 0 A Cutting bo ard (Sanalite o r com posite)
109 Co ndensate evaporator (1 per coil) fo r base
107 F Tray rack
102 Drawers
A-(2) 19 ” in lieu of one doo r
B-(2) 2 7” in lieu of one do or
C-(2) 3 2” in lieu o f o ne door
108 Locks
120 F Co ld pan drain
213 * 22 0V/ 50 c ycle
* Inclusion of this option w ill alter the
electrical specifications of the unit
®
The Delfi eld Company, P.O. Box 470, Mt Pl easan t, MI 48804- 0470, U.S.A. • (800) 733- 8821 • Fax (800) 669- 0619 • w w w.d elf ield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2001 The Delfield Company. All rights reserved. Printed in U.S.A.
F18RR
31.5” (80cm) Deep Remote Reduced Height Rail
19 " (4 8 .3cm)
REF'G
19 " (4 8 .3cm)
REF'G
ELEVATION VIEW
F18 RR44
27" ( 6 8 .6 cm)
REF'G
27" ( 6 8 .6 cm)
ELEVATION VIEW
F18 RR6 0
REF'G
6 " [ 15 .2cm]
6 " [ 15 .2cm]
19 " (4 8 .3cm)
REF'G
27" ( 6 8 .6 cm)
REF'G
ELEVATION VIEW
F18 RR52
3 2" ( 8 1.3 cm)
REF'G
ELEVATION VIEW
F18 RR70
3 2" ( 8 1.3 cm)
REF'G
6 " [ 15 .2cm]
6 " [ 15 .2cm]
27" ( 6 8 .6 cm)
REF'G
19 " (4 8 .3cm)
REF'G
ELEVATION VIEW
F18 RR79
The Delfi eld Company, P.O. Box 470, Mt Pl easan t, MI 48804- 0470, U.S.A. • (800) 733- 8821 • Fax (800) 669- 0619 • w w w.d elf ield.com
27" ( 6 8 .6 cm)
REF'G
6 " [ 15 .2cm]
27" ( 6 8 .6 cm)
REF'G
27" ( 6 8 .6 cm)
REF'G
ELEVATION VIEW
F18 RR8 7
27" ( 6 8 .6 cm)
REF'G
6 " [ 15 .2cm]
Delfield reserves the right to make changes in design or specifications without prior notice. ©2001 The Delfield Company. All rights reserved. Printed in U.S.A.