DB Technologies LVX-12 Data Sheet
Spec Sheet
LVX 12
2-Way Active Speakers
12” / 1”, 800W PRG
Applications
- Live sound
- Stage Monitoring
- Portable and installed audio-visual systems
- Clubs, ballrooms, houses of worship,
Museums and Theatres
Features
- 2-Way Active Speakers
- 800W Class-D Digipro® amplier
- 12” woofer (2” voice coil)
- 1” compression driver
- 90° x 40° directivity
- Rotatable Compr. Driver Horn
- AD/DA 24 bit \ 48 kHz
- EQ presets selection
- Peak, RMS, Thermal Limiter
- 12x M10 Rigging points
- No Cooling Fan
Description
LVX active loudspeakers series is the answer
to all those xed installations and live music
requirements where sound reinforcement
systems must be lightweight, stylish, portable,
powerful and in line with the highest
professional standards.
Coming from the experience gained in
designing touring products as the renowned
DVX series, the new LVX series offers smart
solutions with a special attention to the needs
of xed and portable installations.
The voicing of these speakers is very linear
and designed to for any audio content, such as
speech, background or live music, multimedia
contents, etc., respecting their characteristics
without problems and with a high level of
performance.
LVX 12 features a 12” woofer and a 1”
compression driver on a 90° x 40° rotatable
horn. This last feature is particularly valued
even in case of use as stage monitor, thanks to
the rear angle of 45°.
The LVX 12 is equipped with a 800W DIGIPRO®
digital amp module. This highly efcient
amplier provides high power, limited weight
and is totally silent due to the low thermal
dissipation and no cooling fans required.
The digital preamp with DSP controls audio
crossover, frequency response, active peak-
RMS-thermal limiter, and acoustic alignment. A
selector enables to select one of two different
EQ curves - “FLAT” or “PROCESSED“ - to provide
the right sound in any occasion.
The enclosure is made of a 12mm MDF with
a look very elegant and rened. The scratchresistant nishes are available in both black and
white. There are three handles (one on top; two
on sides), 12x M10 rigging points and a Ø36mm
pole mount cup to allow this speaker to be used
in any kind of installation or gigs.
In case of installation where you want to keep
as much as possible a stylish and sober look,
a kit of handle-caps is available to cover the
handles and keep surfaces as linear as possible.
Finally, there are two types of wall-mounting
brackets; one with pan-tilt adjustment and
xed locking system, the other with even
quick-release pins, ideal for all those events
where you need to frequently remove the
speaker without losing the exact mechanical
positioning.
Page 1 of 3
rev.1.0 - 2015
LVX 12
Technical Specications
Technical Data
Speaker Type 2-Way Active Speaker
Acoustical data
Frequency Response [- 10dB] 55 - 20.000 Hz
Frequency Response [- 6dB] 62 - 19.000 Hz
Max SPL 127 dB
HF 1”
HF Voice Coil 1”
Type HF Compression driver
Directivity 90 x 40°
Rotatable Horn YES
LF LF: 12”
LF Voice Coil 2”
Amplier
Amp Technology Digipro®
Amp Class Class-D
Power PRG 800 W
Power Peak 1600 W
Processor
Controller DSP 56bit
AD/DA Converter 24bit/48kHz
System Presets Flat, Processed
Limiter Peak, RMS, Thermal
Crossover Frequency LF- HF 1800 Hz
Slope MF-HF 24 dB/Octave
Rear Panel
Audio Input / Link 1 x XLR female - balanced / 1 x XLR male - balanced
1 x jack 1/4” – balanced
Power Connections VDE Mains Socket with Fuse
Controls 1 x EQ Preset swtich
Mechanics
Housing Multiplex
Angles Up Monitor use 45°
Handles 3 (1x top side, 2 on sides)
Rigging points 12 x M10
Pole mount D36 mm
Width 360 mm (14.17 in)
Height 610 mm (24.02 in)
Depth 360 mm (14.17 in)
Weight 17.0 kg (37.48 lbs.)
1x Power On/Off switch
1 x Volume knob
1 x Mic/Line Input sensitivity switch
3 x LED (Limiter, Signal, Ready)
Page 2 of 3
rev.1.0 - 2015
Loading...