DB Technologies IG3T Datasheet

Spec Sheet

IG3T

2-Way Active Speakers

2x10” / 1.4”, 900W RMS

Applications

- Compact live sound reinforcement system

- Permanent installation in theatres, houses of
worship, convention centres

- Portable PA, retail, clubs, ballrooms, houses of
worship, corporate AV, live theatres

Features

- 2-Way Active Speaker

- 2x10” woofer; 1.4” compression driver

- 900W RMS Class-D Digipro® G3 amplier

- Asymmetrical Vertical Coverage

- Digital Steering Coverage

- Element Position Detection

- Speakers with neodymium magnet

- User-friendly interface (OLED-encoder)

- Unique Speaker Lock System

- Delay on Board

- Microphone HPF and Notch Filter (variable freq)

Description

INGENIA is a new range of portable speakers,

modular, yable, with a user-friendly interface,

able to automatically sets up to ensure best

coverage, acoustic coherence and high

sound pressure. It consists of four models:

IG1T, 2T, 3T and 4T with different transducer
congurations (all with neodymium magnets)
and powers. The IG3T features 2x10” woofers,
a 1.4” compr. driver and is equipped with a
900W RMS Digipro® G3 digital amplier, which
combines high power, lightweight design,
SMPS technology with PSU auto-range and a
remarkably efciency.

The horn of the IG3T is horizontally symmetric
and vertically asymmetric (narrower in the
upper part and wider in the lower). This is
because this speaker is designed to work

in single or stacked conguration with
the two horns coupled one against the
other by overturning the upper unit on the
lower one. The mechanical design of the
waveguide, furthermore, is supported by a
sophisticated processing in order to steer
coverage according to the presence or not of
a second speaker stacked. The DSP doesn’t act
only on the compression driver, but also on

woofers, ensuring maximum intelligibility and

transparency in the whole frequency range.

The IG3T is equipped with an infrared system in
the two handles on top and bottom sides. When
a second unit in stacked on another, there is
a quick exchange of information between the
two DSPs, which auto setup to operate as a
single speaker. This infrared detection system
does not suffer the presence of sunlight.

The advanced interface always guides the
user and automatically sets up the system by
managing mixer, power amplier, EQs, levels

as well as all input devices. A variety of preset

congurations are available. The OLED display,
visible even in the sunlight and equipped with a
self-rotation device, provides all the necessary
information to the total system control. All
editing operations are carried out through a
single rotary encoder with switch.

The locking system of the INGEGNA is extremely
rugged and reliable. Moreover, to ensure the

speakers to be perfectly aligned before locking

the clamps, there are some feet and recessions
on the top and the bottom of the enclosure.

A new y-bar, adaptable to all INGENIA models,
allows the user to hang up two speakers in
vertical array. Then the user will choose the

appropriate processing preset and get a real

line-array system. The housing is made of
reinforced polypropylene with a very elegant
look and a nishing almost like a painting.
Internally, there is an aluminium reinforcing
structure that, in addition to dampen vibration
and improve the acoustic characteristics of the
speaker, makes it much more tough.

Page 1 of 3

rev.1.0 - 2015

IG3T

Technical Specications

Techinical Data

Speaker Type 2-Way Active Speaker

Acoustical data

Frequency Response [- 10dB] 53 - 20.000 Hz

Frequency Response [- 6dB] 57- 19.200 Hz

Max SPL 132

HF 1.4”, 3” v.c.

Directivity (HxV) 110 x 90° (+20°/- 70°)

HF Type Neodymium compression driver

Horn Vertical asymmetric

Crossover Frequency 1100 Hz

LF 2x10”, 2.5” v.c.

LF Type Neodymium

Amplier

Amp Technology Class-D, Digipro® G3

RMS Power 900 Watt

Peak Power 1800 Watt

Processor

Controller DSP 56 bit

AD/DA converter 24bit/48kHz

Limiter Peak, Thermal Limiter

Rear Panel

User Interface OLED display + rotative knob w/switch

Signal Input 1 x Combo IN (XLR + Jack 6.3mm)

Signal Out 1 x XLR link OUT

Service Port Mini USB

Mains Connector New Neutrik® NAC3PX

Features

Positioning Self-rotating display

Digital Steering +10°/+5°/0°/-5°/-10°

EQ Acoustic Correction (Lo/Hi Shelving, Mid Attenuation)

Delay On Board 15 Meters (Stage Alignement) +43.7m (System Delay).

Mechanics

Housing Polypropylene PP reinforced

Grille FULL/Invisible screws

Flyable Yes

Handles 1x on top / 1x on bottom

Pole Mount Standard D36mm

Width 280 mm (11.02 in)

Height 806 mm (31.73 in)

Depth 393 mm (15.47 in)

Weight 22.24Kg (49.03 lbs.)

Accelerometer
Infrared Communication and Display Mirroring

Microphone HPF and Notch Filter (Variable Freq.)

Page 2 of 3

rev.1.0 - 2015