
Floatless RainBank® (FL)
KRB1NF & KRB2NF
Set-up Instructions
AUSTRALIA
Davey Support Centre
6 Lakeview Drive,
Scoresby, Australia 3179
Ph: 1300 367 866
Fax: 1300 369 119
Davey Water Products Pty Ltd
Member of the GUD Group
ABN 18 066 327 517
® Davey and RainBank are registered trademarks of Davey Water Products Pty Ltd.
© Davey Water Products Pty Ltd 2014.
Website: davey.com.au
NEW ZEALAND
Davey Support Centre
7 Rockridge Avenue,
Penrose, Auckland 1061
Ph: 0800 654 333
Fax: 09 527 7654
Website: daveynz.co.nz
2009 WINNER
P/N 402330

Save time, save a call back
IMPORTANT:
For trouble free function you MUST
set up your RainBank in accordance
with these instructions.
Why?
Here is how to
get it right…
Make sure the top of the
pump is LOWER than the
discharge point.
TIP: This is easier if you have your pump
and Rainbank close to the tank.
ü
Like this…
Not like this…
Trying to lift
water from an
in-ground
tank.
✘
ate
Air gets trapped and can’t be
released. Pump loses prime
and cannot pump water until
reprimed.
o Toilets
and Laundry
W
Or this…
Tank water level is higher than top
of the pump.
Pump is higher than
the lowest level of the
water in the tank.
✘
Finally…
If you are encountering issues with your system how can you fix it?
1. Modify the installation so that top of the pump is below lowest water level
2. Fit and adjust a Davey Float Switch. (P/N 13961)
Refer to the full installation & operating instructions for advice on how to t
an external oat switch.
Experts in water.