How it Works
Datavideo
Loading...
SE-650
User Manual
80 pgs4.06 Mb0
User Manual
2 pgs104.55 Kb0
Users Manual
59 pgs3.42 Mb0
Instruction Manual
41 pgs2.18 Mb0
Table of contents
Loading...

Datavideo SE-650 Users Manual

HD 4-CHANNEL DIGITAL VIDEO SWITCHER
SE-650
Instruction Manual

Table of Contents

TANDARD WARRANTY .............................................................................................................................................. 6
S T
HREE YEAR WARRANTY ............................................................................................................................................ 6
CHAPTER 1 INTRODUCTION ..................................................................................................................... 7
1.1 F
1.2 S
EATURES .................................................................................................................................................... 7
YSTEM DIAGRAM ......................................................................................................................................... 8
CHAPTER 2 CONNECTIONS AND CONTROLS .............................................................................................. 9
2.1 R
2.2 F
EAR PANEL ................................................................................................................................................. 9
RONT PANEL ............................................................................................................................................. 11
SWITCHER SETUP WITH A WINDOWS COMPUTER ............................................................................................. 17
3.1
3.2
INSTALLING THE SWITCHER IMAGE IMPORT/EXPORT SOFTWARE TO A WINDOWS COMPUTER .................................. 18
3.2.1 Router Based DHCP Setup ................................................................................................................... 19
3.2.2 Setting the Target IP Address with the Switcher Image Import/Export Software .............................. 20
CHAPTER 4 OSD MENU .......................................................................................................................... 22
4.1 S
TART ........................................................................................................................................................ 22
4.1.1 Transition ............................................................................................................................................ 22
4.1.2 Type ..................................................................................................................................................... 22
4.1.3 Wipe Effects ........................................................................................................................................ 22
4.1.4 Border ................................................................................................................................................. 23
4.1.5 Position ............................................................................................................................................... 23
4.1.6 Matte .................................................................................................................................................. 23
4.2 K
EYER ........................................................................................................................................................ 23
4.2.1 Keyer ................................................................................................................................................... 23
4.2.2 Keyer Control....................................................................................................................................... 23
4.2.3 Key Source ........................................................................................................................................... 24
4.2.4 Fill Source ............................................................................................................................................ 24
4.2.5 CK Setup .............................................................................................................................................. 24
4.2.6 Mask ................................................................................................................................................... 25
4.3 P-I
N-P ....................................................................................................................................................... 25
4.3.1 P-In-P Source ....................................................................................................................................... 25
4.3.1 Position ............................................................................................................................................... 26
4.3.2 Border ................................................................................................................................................. 26
4.3.3 Crop ..................................................................................................................................................... 26
4.4 P-I
N-P KEYER ............................................................................................................................................. 26
4.4.1 P-In-P Source ....................................................................................................................................... 27
4.4.2 Keyer ................................................................................................................................................... 27
2
4.4.3 Keyer Control....................................................................................................................................... 27
4.4.4 CK Setup .............................................................................................................................................. 27
4.4.5 Mask ................................................................................................................................................... 28
4.5 L
OGO ........................................................................................................................................................ 28
4.5.1 Logo Image ......................................................................................................................................... 28
4.5.2 Logo Control ........................................................................................................................................ 28
4.5.3 Logo Source (Logo Src) ........................................................................................................................ 28
4.5.4 Fill Source ............................................................................................................................................ 29
4.5.5 Mask ................................................................................................................................................... 29
4.6 S
TILLS ........................................................................................................................................................ 29
4.6.1 Load Still .............................................................................................................................................. 30
4.6.2 Save Still .............................................................................................................................................. 30
4.6.3 Grab Still.............................................................................................................................................. 30
4.6.4 Freeze .................................................................................................................................................. 31
4.7 U
SER MEMS ............................................................................................................................................... 31
4.7.1 Load Memory ...................................................................................................................................... 31
4.7.2 Save Memory ...................................................................................................................................... 31
4.7.3 Load Clip .............................................................................................................................................. 31
4.8 I
NPUTS ...................................................................................................................................................... 32
4.8.1 Input 1-4 .............................................................................................................................................. 32
4.8.2 Freeze .................................................................................................................................................. 32
4.8.3 Crosspoint ........................................................................................................................................... 32
4.9 O
UTPUTS ................................................................................................................................................... 32
4.9.1 Outputs ............................................................................................................................................... 33
4.9.2 Audio ................................................................................................................................................... 33
4.9.3 Tally Mode .......................................................................................................................................... 33
4.9.4 Multiviewer ......................................................................................................................................... 34
4.10 S
ETUP ....................................................................................................................................................... 34
4.10.1 Standard ......................................................................................................................................... 34
4.10.2 Menu Mode .................................................................................................................................... 34
4.10.3 Menu Preference ............................................................................................................................ 34
4.10.4 Auto Save ....................................................................................................................................... 35
4.10.5 Factory Default............................................................................................................................... 35
4.10.6 Reset Names .................................................................................................................................. 35
4.10.7 Language........................................................................................................................................ 35
4.10.8 Software ......................................................................................................................................... 35
5.1 C
5.2 L
5.3 S
HROMAKEYER ........................................................................................................................................... 36
OGO INSERTION ......................................................................................................................................... 36
TILL IMAGES .............................................................................................................................................. 37
5.3.1 Export/Import Still Images to/from the PC ......................................................................................... 37
5.3.2 Loading still images ............................................................................................................................ 43
5.4 S
TINGER TRANSITION EFFECT ........................................................................................................................ 44
5.4.1 Loading the existing Clip for Stinger Transition Effect ........................................................................ 44
5.4.2 Importing the Clip for Stinger Transition Effect from the PC .............................................................. 45
5.4.3 How to Create the PNG Sequence for Stinger Transition Effect.......................................................... 47
3
5.5 USER MEMORY ........................................................................................................................................... 52
5.5.1 Export/Import User Memory Preset to/from the PC ........................................................................... 52
5.5.2 Loading User Memory Preset .............................................................................................................. 53
PPENDIX 1 TALLY OUTPUTS .................................................................................................................................. 54
A A
PPENDIX 2 FIRMWARE UPGRADE ........................................................................................................................... 55
A
PPENDIX 3 FREQUENTLY-ASKED QUESTIONS............................................................................................................ 56
A
PPENDIX 4 DIMENSIONS ...................................................................................................................................... 57
A
PPENDIX 5 SPECIFICATIONS................................................................................................................................... 58
Disclaimer of Product & Services
The information offered in this instruction manual is intended as a guide only. At all times, Datavideo Technologies will try to give correct, complete and suitable information. However, Datavideo Technologies cannot exclude that some information in this manual, from time to time, may not be correct or may be incomplete. This manual may contain typing errors, omissions or incorrect information. Datavideo Technologies always recommend that you double check the information in this document for accuracy before making any purchase decision or using the product. Datavideo Technologies is not responsible for any omissions or errors, or for any subsequent loss or damage caused by using the information contained within this manual. Further advice on the content of this manual or on the product can be obtained by contacting your local Datavideo Office or dealer.
4

FCC Compliance Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired
operation.

Warnings and Precautions

1. Read all of these warnings and save them for later reference.
2. Follow all warnings and instructions marked on this unit.
3. Unplug this unit from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp
cloth for cleaning.
4. Do not use this unit in or near water.
5. Do not place this unit on an unstable cart, stand, or table. The unit may fall, causing serious damage.
6. Slots and openings on the cabinet top, back, and bottom are provided for ventilation. To ensure safe and
reliable operation of this unit, and to protect it from overheating, do not block or cover these openings. Do not place this unit on a bed, sofa, rug, or similar surface, as the ventilation openings on the bottom of the cabinet will be blocked. This unit should never be placed near or over a heat register or radiator. This unit should not be placed in a built-in installation unless proper ventilation is provided.
7. This product should only be operated from the type of power source indicated on the marking label of the
AC adapter. If you are not sure of the type of power available, consult your Datavideo dealer or your local power company.
8. Do not allow anything to rest on the power cord. Do not locate this unit where the power cord will be
walked on, rolled over, or otherwise stressed.
9. If an extension cord must be used with this unit, make sure that the total of the ampere ratings on the
products plugged into the extension cord do not exceed the extension cord rating.
10. Make sure that the total amperes of all the units that are plugged into a single wall outlet do not exceed 15
amperes.
11. Never push objects of any kind into this unit through the cabinet ventilation slots, as they may touch
dangerous voltage points or short out parts that could result in risk of fire or electric shock. Never spill liquid of any kind onto or into this unit.
12. Except as specifically explained elsewhere in this manual, do not attempt to service this product yourself.
Opening or removing covers that are marked “Do Not Remove” may expose you to dangerous voltage points or other risks, and will void your warranty. Refer all service issues to qualified service personnel.
13. Unplug this product from the wall outlet and refer to qualified service personnel under the following
conditions:
a. When the power cord is damaged or frayed; b. When liquid has spilled into the unit; c. When the product has been exposed to rain or water; d. When the product does not operate normally under normal operating conditions. Adjust only those
controls that are covered by the operating instructions in this manual; improper adjustment of other controls may result in damage to the unit and may often require extensive work by a qualified technician to restore the unit to normal operation;
e. When the product has been dropped or the cabinet has been damaged; f. When the product exhibits a distinct change in performance, indicating a need for service.
5

Warranty

Standard Warranty

• Datavideo equipment are guaranteed against any manufacturing defects for one year from the date of
purchase.
• The original purchase invoice or other documentary evidence should be supplied at the time of any
request for repair under warranty.
• The product warranty period begins on the purchase date. If the purchase date is unknown, the
product warranty period begins on the thirtieth day after shipment from a Datavideo office.
• Damage caused by accident, misuse, unauthorized repairs, sand, grit or water is not covered under
warranty.
• Viruses and malware infections on the computer systems are not covered under warranty.
• Any errors that are caused by unauthorized third-party software installations, which are not required
by our computer systems, are not covered under warranty.
• All mail or transportation costs including insurance are at the expense of the owner.
• All other claims of any nature are not covered.
• Cables and batteries are not covered under warranty.
• Warranty only valid in the country or region of purchase.
• Your statutory rights are not affected.

Three Year Warranty

• All Datavideo products purchased after July 1st, 2017 are qualified for a free two
years extension to the standard warranty, providing the product is registered with Datavideo within 30 days of purchase.
• Certain parts with limited lifetime expectancy such as LCD panels, DVD drives, Hard Drive, Solid State
Drive, SD Card, USB Thumb Drive, Lighting, Camera module, PCIe Card are covered for 1 year.
• The three-year warranty must be registered on Datavideo's official website or with your local
Datavideo office or one of its authorized distributors within 30 days of purchase.

Disposal

For EU Customers only - WEEE Marking
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human
health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
CE Marking is the symbol as shown on the left of this page. The letters "CE" are the
abbreviation of French phrase "Conformité Européene" which literally means
"European Conformity". The term initially used was "EC Mark" and it was officially
replaced by "CE Marking" in the Directive 93/68/EEC in 1993. "CE Marking" is now used
in all EU official documents.
6

Chapter 1 Introduction

The datavideo SE-650 is a small, cost-effective, HD digital video switcher with easy-to-use professional features. It offers two HD SDI and two HDMI inputs. Output options include one user assignable HD SDI, two HDMI outputs.
The SE-650 also features an audio mixer with microphone and unbalance RCA audio inputs; more features include Chroma Keyer, Luma Keyer, PIP, Wipe Generator, Still stores and Tally.

1.1 Features

• 4 video Input : HD-SDI x 2 + HDMI x 2
- Frame Sync on each input
• 3 Video Outputs : HD-SDI x 1 + HDMI x 2
• Audio input : Stereo RCA (L/R) x 1 + Microphone x 2
• Audio Output : Stereo RCA (L/R) x 1 + Stereo headphone mini Jack x 1
• Audio Mixer : MIC x 2 + Stereo x 1 + internal Digital embedded x 1
• Flexible Mix/Effects Processor with
- 1 Upstream Keyer, supporting Chroma Key & Linear/Luma Key
- 1 Upstream PIP, supporting Chroma Key & Luma Key Modes as well as unkeyed mode
- Wipe Generator
32 Wipe Patterns, including Circle & Heart Borders & Softness Control
- Wipe, Mix & Cut Transitions
- Full M/E Preview function
- Logo insertion
• Any Input (1-4) can be used as a Frame store (Stills Store)
• Assignable Outputs
- Program (w/ DSK)
- Clean Program (w/o DSK)
- Clean Preview (w/o DSK)
- Multiview
- One of the input signals
• XPT (Cross Point Assignment)
• Tally Output
7

1.2 System Diagram

8

Chapter 2 Connections and Controls

1
HDMI Video Input 1-2
7
TALLY Output Port
2
HD-SDI Video Input 3-4
8
MIC IN – CH1/CH2
3
HD-SDI Video Output 1
9
Audio Input – Stereo RCA (Left/Right)
4
HDMI Video Output 1-2
10
Audio Output – Stereo RCA (Left/Right)
5
Ethernet Port
11
Power Switch
6
USB F/W Upgrade Port
12
DC IN
1 HDMI Video Input 1-2
2 HD-SDI Video Input 3-4
3 HD-SDI Video Output 1 4 HDMI Video Output 1-2
5 Ethernet Port
1 4 5 6 7 8 9
10
12 2 3
11

2.1 Rear Panel

The SE-650 provides two HDMI video input channels for connecting HDMI video sources.
The SE-650 provides two HD-SDI video input channels for connecting HD-SDI video sources.
The SE-650 provides an HD-SDI video output channel which can be connected to an HD-SDI video display.
The SE-650 provides two HDMI video output channels which can be connected to any HDMI video monitors. HDMI 1 is user assignable and HDMI 2 outputs Multiview display.
The Ethernet port allows the user to transfer files to and from the switcher on the PC remotely. See Chapter 4 for details on how you can utilize this port or Chapter 3 for system setup using this port.
Note: The SE-650 has a default IP address of 192.168.1.101.
9
6 USB F/W Upgrade Port
USB port for firmware upgrade. Please refer to the Firmware
7 TALLY Output Port
8 MIC IN – CH1/CH2
Left Channel
Right Channel
States
MIC1
MIC2
MIC 1(L) and MIC 2(R) are respectively connected to left and right channels.
MIC1
Not
When MIC 1 is connected to the left
MIC 1 input signals.
Not
MIC2
When no MIC signal is connected to the
which will thus be grounded.
Not
Not
When no MIC is connected to the two
from being generated.
9 Audio Input – Stereo RCA (Left/Right)
10 Audio Output – Stereo RCA (Left/Right)
Upgrade section for the procedure.
Sends Red, and Green tally signals to each channel.
Red indicates On-Air, and Green indicates next camera source. Tally output port can connect other Datavideo peripheral devices such as ITC-100, ITC-200, AM-100 or other monitor models, allowing the peripheral device to communicate with the SE-650 or send tally signal to be displayed on the monitor.
Two Channels of unbalanced MIC input.
Connected
channel and MIC 2 is not connected to the right channel, the right channel switch will replicate MIC 1 signal onto the right channel thus both channels are
Connected
left channel and only MIC 2 is connected to the right channel, MIC 2 signal will not be replicated onto the left channel
Connected
Connected
channels, the left channel switch will ground the left channel to prevent noise
Connects unbalanced analog audio source (stereo) for streaming and recording.
Unbalanced analog audio output (stereo) for monitoring the selected audio input source.
10
11 Power Switch
12 DC IN
Switcher Settings
Transition Methods
Menu browsing buttons
T-Bar (manual transition)
RESET button
CUT button
User Memory
AUTO transition button
Transition Effects
Program / Preview Outputs
WIPE transition effect selection
Program row
TRANS BG – Background transition
Preview row
MIX Enable/Disable button
Volume Control
WIPE transition effect Enable/Disable
Volume adjustment sliders
PIP/Keyer
Headphone jack
PIP Enable/Disable buttons
Audio meter
Switcher
Settings
Transition
Effects
PIP/Keyer
Transition
Program/Preview
Volume Control

2.2 Front Panel

Power switch ON/OFF
DC in socket connects the supplied 12V / 19W PSU. The connection can be secured by screwing the outer fastening ring of the DC In plug to the socket.
11
Keyer Enable/Disable buttons
Headphone volume control knob
Logo Enable/Disable button
Switcher Keyboard Descriptions
Menu browsing buttons
Press the MENU button to gain access to the menu;
Reset Button
When in Menu Select mode (left hand
will reset all current menu items to their factory
User Memory
Transition Effects
WIPE Transition Effect Selection
use the up/down/left/right arrow buttons to browse through the menu and press ENTER button to select an option or MENU button again to exit.
Mode 1 ­column of the OSD menu), pressing the 'Reset' button
defaults.
Mode 2 - When in a Sub-Menu, pressing the 'Reset' button will reset the current menu line only.
User Memory buttons 1-3 allow the user to quickly recall and load previously saved switcher settings with a single button press. This includes PIP, Keyer and DSK settings. The switcher loads settings saved to User Memory 0 as default settings used at boot up. See the
User Memory section for more information.
Each Wipe button consists of black and white colors. The white represents the current Program image and the black represents the WIPE-IN image. There are a total of 2 WIPE presets offered on the SE-650; the WIPE buttons allow the user to make a selection directly from the control panel for the first 2 and remaining 30 WIPE effects are selectable from the menu (Start).
Pressing the REV button reverses the direction of the WIPE.
12
TRANS BG – Background Transition
The TRANS BG button enables Background Transition
MIX Enable/Disable button
WIPE Transition Effect Enable/Disable button
PIP/Keyer
PIP Enable/Disable buttons
PIP PGM: Shows the configured PIP on multiview and
PIP PVW: Shows the configured PIP on PVW and
from the Preview
between Program / Preview. This feature is primarily used in Chromakeyer effect. When enabled, foreground and background will be switched together during transition. The background will be locked when the TRANS BG is disabeld, thus only the foreground is switched during the transition and the background will remain unchanged. If you would like to use the switcher function, please enable the “TRANS BG” function.
A MIX, also known as a dissolve, is a transition wherein the Program video is replaced by the Preview video at a smooth rate, and at the same time. Pressing the MIX button will enable the MIX transition effect and automatically disable the WIPE button. To activate the
MIX effect, simply press the AUTO button or move the T-Bar.
Pressing the WIPE button enables the WIPE transition effect after which the WIPE transition effect can be selected. To trigger the WIPE transition effect, simply press the AUTO button or move the T-Bar.
Wipe transition effect selection, border and position can be configured in the OSD menu (Start).
Note: When WIPE and MIX buttons are enabled at the same time, the SE-650 enters the Clip Transition mode.
Picture in Picture puts the selected Sub Video Source in a window on the Main Program view, with control over window size and placement. For PIP configuration, please refer to the PIP section.
PGM outputs.
multiview outputs. Holding down this button also allows selection of the PIP source Source row. The selected source button will flash.
13
Note: You are also allowed to apply the chromakey
effect to the PIP window. Please refer to the PIP
Keyer Enable/Disable buttons
PVW and multiview
Logo Enable/Disable button
Transition Methods
T-Bar (Manual Transition)
CUT button
mmediate manual
without any
AUTO button
section for chromakey configurations.
KEYER PGM: Enables the key (Chroma / Luma / Linear) on multiview and PGM output
KEYER PVW: Enables Keyer on outputs. Press and hold this button until the Preview Source row starts to flash and then select Keyer KEY or FILL sources from the Preview Source row.
Please refer to the Keyer section for keyer configurations.
The LOGO ON/OFF button enables the configured Logo on PVW and PGM outputs. Please configure the logo image source in the OSD. Refer to the Logo section for configuration details.
T-Bar is used to manually perform a transition. PVW and PGM views can be transitioned at your preferred speed. To include the transition effect, simply press the WIPE or MIX button, after which the Transition Effect will be trigger as you move the T-Bar.
Pressing the Cut button performs i switch between PVW and PGM views transition effect.
Pressing the Auto button automatically transitions PVW and PGM views according to the selected speed and the configured transition effect.
14
Program / Preview Outputs
Program Source Row
Preview Source Row
Volume Control
Volume Adjustment Sliders
Pressing the number buttons along the PROGRAM row selects a video source for the PGM view.
BKG button: Pressing the BKG button will switch the background to the Matte background or color
bars.
Still button: Pressing the STILL button will switch the Main Program view to a still picture, which can be selected in the OSD menu.
Note: Pressing the STILL button repeatedly alternates the Main Program view between Still 1 and Still 2 pictures.
Pressing the number buttons along the PROGRAM row selects a video source for the PGM view.
BKG button: Pressing the BKG button will switch the background to the Matte background or color bars.
Still button: Pressing the STILL button will switch the Main Program view to a still picture, which can be selected in the OSD menu.
Note: Pressing the STILL button repeatedly switches the Main Program view between Still 1 and Still 2 pictures.
Sliders to control audio levels for the Main audio mixer.
MIC 1: Unbalanced MIC IN MIC 2: Unbalanced MIC IN AUX: RCA audio input (analog) Digital: HDMI or SDI audio input (digital) Master: Main audio output
15
Headphone Jack
Audio Meters
Audio Volume (dBV)
LED Color
G G G
G G Y Y R
Range (dBV)
-20
-12
-11
-9.5
-8.5
-6.5
-5.5
-3
-2 1 2
5.5
6.5 8 9+
Headphone Volume Control Knob
-20 -10 -8 -4 0 4 8 10
G: Green Y: Yellow R: Red
Headphones jack accepts a stereo mini jack plug for stereo headphones. The headphone volume is controlled by the Headphone volume control knob.
LED style meters, which show the signal strength at the Main Program Audio Output. The signal measured is determined by the level set with the Master slider. The LEDs turn red at +10 dB to indicate clipping distortion.
Headphone volume control knob controls Headphone level with the MIN representing the minimum volume and MAX representing the maximum volume.
16

Chapter 3 Network Setup

The Ethernet port on the back panel of the SE-650 allows the user to import Still/Clip image or User memory using the Switcher Image Import/Export software discussed in Chapter 5. This chapter discusses direct connection between the SE-650 and your Windows computer as well as the remote setup in detail. Please note that the Switcher Image Import/Export software must be installed on
your Windows-based computer before using this feature.

3.1 Switcher Setup with a Windows Computer

When new from the factory the SE-650 will initially have a static IP address of 192.168.1.101. The
unit can be directly connected to a Windows-based computer using an RJ-45 ethernet cable. The following set up should allow you to initially configure the unit before moving it to an existing DHCP / LAN network.
• An RJ-45 ethernet cable.
• Windows 7/8/10 laptop or PC.
• The Datavideo Switcher Image
Import/Export software.
Instructions
1. First connect the SE-650 and the Windows computer together using an RJ-45 ethernet cable.
2. Turn on the Windows computer and set it to static IP setup within the Windows Network and
Sharing Centre. In our example below the computer is given the following IP settings so that the computer matches the same IP range as the switcher.
3. Now install the Switcher Image Import/Export software to the computer.
17

3.2 Installing the Switcher Image Import/Export software to a Windows Computer

The SE-650 can be connected to a simple IP network and accessed using Windows-based software. If you have not already set up the SE-650 with a computer then please follow the instructions in the previous section.
The SE-650 comes with an accessory software CD. If this CD has been lost or has not been supplied then please download the latest software from the Datavideo SE-650 web page. See:
www.datavideo.com
The install executable file [.msi] will be called SwitcherImageImEx_vXXXX.msi
The vXXXX represents the latest version number.
Double click this .msi file then follow the on screen install wizard prompts.
Once installed launch the Switcher Image Import/Export software.
The Switcher Image Import/Export software has a built-in IP finder, which is designed for PC with multiple Ethernet cards or DHCP network environment. Please note IP finder can only find devices that are on the same network domain as the PC. If you cannot remember your device IP, please press the RESET button to restore the default network settings. Upon launch of the Switcher Image Import/Export software, you will be prompted to select one Ethernet Interface Card.
Once selected, click OK to start the scanning process.
Note: Please make sure the selected interface card is on the same network domain as the SE-650 device.
Once the SE-650 device is found, the software will connect with the switcher hardware over the IP set up described in the previous section. If the connection is successfully established, on the software user interface as shown in the diagram below, the Connect Status will show “Connected” (will display Not Connected if disconnected).
18
Loading...
+ 41 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use