Datasheet TLE2227CP, TLE2227CDW Datasheet (Texas Instruments)

TLE2227, TLE2227Y, TLE2237, TLE2237Y

VIOt

CHIP FORM

‡

0°C to 70°C

EXCALIBUR LOW-NOISE HIGH-SPEED

PRECISION DUAL OPERATIONAL AMPLIFIERS

SLOS184 – FEBRUARY 1997

D

Outstanding Combination of DC Precision
and AC Performance:

Unity-Gain Bandwidth . . . 15 MHz Typ
V

. . . 3.3 nV/√Hz at f = 10 Hz Typ,

n

2.5 nV/√Hz

V

. . . 100 µV Typ

IO

A

. . . 45 V/µV Typ With RL = 2 kΩ

VD

38 V/µV Typ With R

D

Available in 16-Pin Small-Outline

at f = 1 kHz Typ

L

Wide-Body Package

D

Macromodels and Statistical Information
Included

D

Output Features Saturation Recovery
Circuitry

description

The TLE22x7C combines innovative circuit
design expertise and high-quality process control
techniques to produce a level of ac performance
and dc precision previously unavailable in dual
operational amplifiers. This device allows
upgrades to systems that use lower-precision
devices and is manufactured using Texas
Instruments state-of-the-art Excalibur process.

= 1 kΩ

P PACKAGE

(TOP VIEW)

1OUT

1IN–
1IN+

V

CC–

1OUT

1IN–
1IN+

V

NC – No internal connection

DW PACKAGE

(TOP VIEW)

NC
NC

CC–

NC
NC

1
2
3
4

1
2
3
4
5
6
7
8

16
15
14
13
12
11
10

8
7
6
5

9

V
2OUT
2IN–
2IN+

NC
NC
V
2OUT
2IN–
2IN+
NC
NC

CC+

CC+

In the area of dc precision, the TLE22x7C offers a typical offset voltage of 100 µV, a common-mode rejection
ratio of 115 dB (typ), a supply voltage rejection ratio of 120 dB (typ), and a dc gain of 45 V/µV (typ).

The ac performance is highlighted by a typical unity-gain bandwidth specification of 15 MHz, 55° of phase
margin, and noise voltage specifications of 3.3 nV/√Hz

and 2.5 nV/√Hz at frequencies of 10 Hz and 1 kHz,

respectively.
The TLE22x7C is available in a wide variety of packages, including the industry standard 16-pin small-outline

wide-body version for high-density system applications. This device is characterized for operation from 0°C to
70°C.

AVAILABLE OPTIONS

T

A

°

°

†

The DW package is available taped and reeled. Add R suffix to device type (e.g., TLE2227CDWR).

‡

Chip forms are tested at 25°C only.

yp

AT 25°C

100 µV TLE2227CDW TLE2227CP TLE2227Y
100 µV TLE2237CDW TLE2237CP TLE2237Y

SMALL OUTLINE

PACKAGED DEVICES

†

(DW)

PLASTIC DIP

(P)

(Y)

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

Copyright  1997, Texas Instruments Incorporated

1

TLE2227, TLE2227Y, TLE2237, TLE2237Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS

SLOS184 – FEBRUARY 1997

symbol (each amplifier)

IN+

IN–

+

OUT

–

TLE2227Y chip information

This chip, properly assembled, displays characteristics similar to the TLE2227C. Thermal compression or
ultrasonic bonding may be used on the doped-aluminum bonding pads. Chips my be mounted with conductive
epoxy or a gold-silicon preform.

BONDING PAD ASSIGNMENTS

(7)

(8)

116

(6)

(5)

(4)

1IN+

1IN–

2OUT

(3)

(2)

(7)

V

CC+

(8)

+

–

V

CC–

(4)

(1)

(5)

+

(6)

–

1OUT

2IN+

2IN–

(1)

(2) (3)

104

CHIP THICKNESS: 15 TYPICAL
BONDING PADS: 4 × 4 MINIMUM
TJmax = 150°C
TOLERANCES ARE ±10%.
ALL DIMENSIONS ARE IN MILS.

2

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

TLE2227, TLE2227Y, TLE2237, TLE2237Y

EXCALIBUR LOW-NOISE HIGH-SPEED

PRECISION DUAL OPERATIONAL AMPLIFIERS

SLOS184 – FEBRUARY 1997

TLE2237Y chip information

ThIs chip, when properly assembled, displays characteristics similar to TLE2237. Thermal compression or
ultrasonic bonding may be used on the doped-aluminum bonding pads. The chip may be mounted with
conductive epoxy or a gold-silicon preform.

BONDING PAD ASSIGNMENTS

116

(8)

(1)

(7)

(6)

(2) (3)

104

(5)

(4)

V

CC+

1IN+

1IN–

2OUT

CHIP THICKNESS: 15 MILS TYPICAL
BONDING PADS: 4 × 4 MILS MINIMUM
TJmax = 150°C
TOLERANCES ARE ±10%.
ALL DIMENSIONS ARE IN MILS.

(3)

(2)

(7)

(8)

+

–

V

CC–

(4)

(1)

1OUT

(5)

+

–

(6)

2IN+

2IN–

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

3

T
l

R
l

D

7
11

94

4

POST OFFICE BOX 655303 DALLAS, TEXAS 75265

•

equivalent schematic (each amplifier)

Q14

Q12

R4

R5

Q13

Q17

Q18

Q15

Q16

R3

IN+

IN–

Q1

Q2

Q3

Q4

Q5

Q6

Q7

Q8

Q9

Q10

Q11

R1

R2

C1

Q20

Q21

Q22

R6

Q19

Q24Q23

Q26 Q29

R7

R9

Q27

R8 R11

Q28

Q25

C2

R10

Q30

R12

Q32

R13

Q31

Q33

C3

Q34

R15

R16

R17

C4

R18R14

Q36

Q35

V

Q37

CC+

Q38

R19

Q39

Q40

R20

Q41

Q42

Q43

R21

Q44

Q45

Q46

Q47

R22

Q48

R23

Q49

Q51

Q52

Q50

Q53

Q54

R25

Q58

Q55

Q56

Q59

Q57

Q60

R24 R26

Q61

Q62

OUT

TLE2227, TLE2227Y, TLE2237, TLE2237Y

EXCALIBUR LOW-NOISE HIGH-SPEED

PRECISION DUAL OPERATIONAL AMPLIFIERS

SLOS184 – FEBRUARY 1997

emp
ate

e
ease

ate:

–
–

V

CC–

ACTUAL DEVICE COMPONENT COUNT

COMPONENT TLE2227 TLE2237

Transistors 62 62
Resistors 24 24
Diodes 0 0
Capacitors 4 4

C

V

V

TLE2227, TLE2227Y, TLE2237, TLE2237Y

EXCALIBUR LOW-NOISE HIGH-SPEED

PRECISION DUAL OPERATIONAL AMPLIFIERS

SLOS184 – FEBRUARY 1997

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)

Supply voltage, V
Supply voltage, V
Differential input voltage, V
Input voltage range, V
Input current, I

(each input) ±1 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

I

Output current, I
Total current into V
Total current out of V

Duration of short-circuit current at (or below) 25°C (see Note 3) unlimited. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Continuous total dissipation See Dissipation Rating Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Operating free-air temperature range, T

Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds 260°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

†

Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between V

2. Differential voltages are at IN+ with respect to IN–. Excessive current flows if a differential input voltage in excess of approximately
±1.2 V is applied between the inputs unless some limiting resistance is used.

3. The output can be shorted to either supply. Temperature and/or supply voltages must be limited to ensure that the maximum
dissipation rating is not exceeded.

(see Note 1) 19 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

CC+

–19 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

CC–

I

±50 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

O

CC+

CC–

PACKAGE

DW 1025 mW 8.2 mW/°C 656 mW

(see Note 2) ±1.2 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ID

(any input) V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

50 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

50 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

0°C to 70°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A

CC+

DISSIPATION RATING TABLE

TA ≤ 25°C

POWER RATING

P 1000 mW 8.0 mW/°C 640 mW

DERATING FACTOR

ABOVE TA = 25°C

TA = 70°C

POWER RATING

and V

CC–

.

CC±

†

recommended operating conditions

Supply voltage, V

ommon-mode input voltage,

Operating free-air temperature, T

†

Full range is 0°C to 70°C.

CC±

IC

A

MIN MAX UNIT

±4 ±19 V
TA = 25°C ±11
TA = Full range

†

±10.5

0 70 °C

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

5

TLE2227, TLE2227Y, TLE2237, TLE2237Y

PARAMETER

TEST CONDITIONS

T

†

UNIT

VIOInput offset voltage

V

IIOInput offset current

nA

IIBInput bias current

nA

V

Common-mode input voltage range

R

Ω

V

R

kΩ

V

Maximum ositive eak out ut voltage

V

R

kΩ

R

1 kΩ

V

gg

V

R

kΩ

A

VD

gg g

V/µV

V

±10 V

R

kΩ

CMRR

Common-mode rejection ratio

V

V

min

R

Ω

dB

k

ygj

dB

ICCS

t

V

No load

A

EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS

SLOS184 – FEBRUARY 1997

electrical characteristics at specified free-air temperature, V

p

α

c
z

†
NOTE 4: T ypical values are based on the input of fset voltage shift observed through 168 hours of operating life test at TA = 150°C extrapolated

Temperature coefficient of input offset

VIO

voltage
Input offset voltage long-term drift

(see Note 4)

p

p

ICR

Maximum positive peak output voltage

OM+

swing

Maximum negative peak output voltage

OM–

swing

Large-signal differential voltage
amplification

Input capacitance 25°C 8 pF

i

Open-loop output impedance IO = 0 25°C 50 Ω

o

Supply-voltage rejection

SVR

ratio (∆V

Full range is 0°C to 70°C.

CC±

upply curren

to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.

p

/∆VIO)

VIC = 0, RS = 50 Ω

= 50

S

= 1

L

= 2

L

=

L

= 2

L

VO = ±11 V, RL = 2 kΩ 25°C 2.5 45
VO = ±10 V,

=

,

=

= ±4 V to ±18 V, RS = 50 Ω 25°C 94 120
= ±4 V to ±18 V,

= 0,

ICR

,

V
V

O

IC

CC±
CC±

O

RL = 2 kΩ Full range 2

= 1

L

= 50

S

RS = 50 Ω Full range 92

= ±15 V (unless otherwise noted)

±

CC

A

25°C 100 350

Full range 500
Full range 0.4 1 µV/°C

25°C
25°C 7.5 90

Full range 150

25°C 15 90

Full range 150

25°C

Full range

25°C 10.5

Full range 10

25°C 12

Full range 11

25°C –10.5 –13

Full range –10

25°C –12 –13.5

Full range –11

25°C 3.5 38

Full range 1

25°C 98 115

Full range 95

25°C 7.3 10.6

Full range 11.2

TLE2227C

MIN TYP MAX

0.006 1 µV/mo

–11

–13

to

to

11

13

–10.5

to

10.5

µ

m

6

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

PARAMETER

TEST CONDITIONS

T

†

UNIT

SR

Sl

R

C

100 pF

V/

VnEquivalent input noise voltage

25°C

V/√HZ

V

Peak-to-peak equivalent input noise voltage

f

25°C

50

250

nV

InEquivalent input noise current

25°C

A/√HZ

TLE2227, TLE2227Y, TLE2237, TLE2237Y

EXCALIBUR LOW-NOISE HIGH-SPEED

PRECISION DUAL OPERATIONAL AMPLIFIERS

SLOS184 – FEBRUARY 1997

operating characteristics at specified free-air temperature, V

ew rate

p

N(PP)

THD Total harmonic distortion
B

1

B

OM

φ

m

†

Full range is 0°C to 70°C.

NOTE 5: Measured distortion of the source used in the analysis is 0.002%.

Unity-gain bandwidth RL = 2 kΩ, CL = 100 pF 25°C 7 13 MHz
Maximum output-swing bandwidth RL = 2 kΩ 25°C 30 kHz
Phase margin RL = 2 kΩ CL = 100 pF 25°C 40°

p

p

p

= 2 kΩ,

L

RS = 20 Ω, f = 10 Hz
RS = 20 Ω, f = 1 kHz

= 0.1 Hz to 10 Hz
f = 10 Hz
f = 1 kHz
VO = ±10 V,

See Note 5

=

L

AVD = 1,

= ±15 V

±

CC

A

25°C 1.7 2.5

Full range 1.2

°

°

°

25°C <0.002%

MIN TYP MAX

TLE2227C

3.3 8

2.5 4.5

1.5 4

0.4 0.6

µs

n

p

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

7

TLE2227, TLE2227Y, TLE2237, TLE2237Y

PARAMETER

TEST CONDITIONS

T

†

UNIT

VIOInput offset voltage

V/°C

V

0

R

50 Ω

IIOInput offset current

nA

IIBInput bias current

nA

V

Common-mode input voltage range

R

Ω

V

R

kΩ

V

Maximum positive peak output voltage swing

V

R

kΩ

R

kΩ

V

Maximum negative peak output voltage swing

V

R

kΩ

AVDLarge-signal differential voltage amplification

V/µV

V

±10 V

R

1 kΩ

CMRR

Common-mode rejection ratio

IC ICR

,

dB

k

Suppl

oltage rejection ratio (∆V

/∆V

dB

ICCSupply current

V

No load

mA

EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS

SLOS184 – FEBRUARY 1997

electrical characteristics at specified free-air temperature, V

p

α

C
z

†
NOTE 4. T ypical values are based on the input of fset voltage shift observed through 168 hours of operating life test at TA = 150°C extrapolated

Temperature coefficient of input offset voltage Full range 0.4 1

VIO

Input offset voltage long-term drift (see Note 4)

p

p

ICR

OM+

OM–

Input capacitance 25°C 8 pF

i

Open-loop output impedance IO = 0 25°C 50

O

pp

SVR

Full range is 0°C to 70°C.

y-v

pp

to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.

p

p

p

p

p

p

p

CC±

IO

)

,

=

IC

= 50

S

= 1

L

= 2

L

= 1

L

= 2

L

VO = ±11V, RL = 2 kΩ 25°C 2.5 45

VO = ±10 V, RL = 2 kΩ Full range 2

=

O

V

= V

RS = 50 Ω

V

= ±4 V to ±18 V,

CC±

RS = 50 Ω

V

= ±4 V to ±18 V,

CC±

RS = 50 Ω

= 0,

O

,

min,

=

S

=

L

= ±15 V (unless otherwise noted)

±

CC

A

25°C 100 350 µV

Full range 500

25°C 0.006 1 µV/mo
25°C 7.5 90

Full range 150

25°C 15 90

Full range 150

25°C

Full range

25°C 10.5

Full range 10

25°C 12

Full range 11

25°C –10.5 –13

Full range –10

25°C –12 –13.5

Full range –11

25°C 3.5 38

Full range 1

25°C 98 115

Full range 95

25°C 94 120

Full range 92

25°C 7.3 10.6

Full range 11.2

TLE2237C

MIN TYP MAX

–11

–13

to

11

–10.5

10.5

to

13

to

°

µ

Ω

8

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

PARAMETER

TEST CONDITIONS

T

†

UNIT

SR

Slew rate

VD

,

,

V/µs

VnEquivalent input noise voltage

25°C

V/√H

InEquivalent input noise current

25°C

A/√H

THD

Total harmonic distortion

O

,

VD

,

25°C

002%

GBP

Gain-bandwidth product

,

L

,

25°C3550

MH

TLE2227, TLE2227Y, TLE2237, TLE2237Y

EXCALIBUR LOW-NOISE HIGH-SPEED

PRECISION DUAL OPERATIONAL AMPLIFIERS

SLOS184 – FEBRUARY 1997

operating characteristics at specified free-air temperature, V

A

= 5, RL = 2 kΩ,

CL = 100 pF

p

V

n(PP)

B

OM

φ

m

†

Full range is 0°C to 70°C.

NOTE 5. Measured distortion of the source used in the analysis was 0.002%.

Peak-to-peak equivalent input noise voltage f = 0.1 Hz to 10 Hz 25°C 50 250 nV

p

p

Maximum output-swing bandwidth RL = 2 kΩ 25°C 80 kHz
Phase margin RL = 2 kΩ, CL = 100 pF 25°C 40°

RS = 20 Ω, f = 10 Hz
RS = 20 Ω, f = 1 kHz

f = 10 Hz
f = 1 kHz
V

= ±10 V , A

See Note 5
f = 100 kHz, R

CL = 100 pF

= 5 V,

= 2 kΩ,

= ±15 V

±

CC

A

25°C 4 5

Full range 3

°

°

°

°

MIN TYP MAX

TLE2237C

3.3 8

2.5 4.5

1.5 4

0.4 0.6

<0.

n

z

p

z

z

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

9

TLE2227, TLE2227Y, TLE2237, TLE2237Y

PARAMETER

TEST CONDITIONS

UNIT

V

R

Ω

V

Maximum positive peak output voltage swing

V

V

Maximum negative peak output voltage swing

V

AVDLarge-signal differential voltage amplification

V/µV

PARAMETER

TEST CONDITIONS

UNIT

VnEquivalent input noise voltage

V/√HZ

V

Peak-to-peak equivalent input noise voltage

f

50

250

nV

InEquivalent input noise current

A/√HZ

EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS

SLOS184 – FEBRUARY 1997

electrical characteristics, V

V

IO

I

IO

I

IB

V

ICR

OM+

OM–

ci
z

o

CMRR Common-mode rejection ratio VIC = V
k

SVR

I

CC

NOTE 4. T ypical values are based on the input of fset voltage shift observed through 168 hours of operating life test at TA = 150°C extrapolated

Input offset voltage 100 350 µV
Input offset voltage long-term drift (see Note 4)
Input offset current
Input bias current 15 90 nA

Common-mode input voltage range RS = 50 Ω

p

p

p

Input capacitance 8 pF
Open-loop output impedance IO = 0 50 Ω

Supply-voltage rejection ratio (∆V
Supply current VO = 0, No load 7.3 10.6 mA

to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.

= ±15 V, TA = 25°C (unless otherwise noted)

CC±

= 0,

IC

p

p

p

/∆VIO) V

CC±

RL = 1 kΩ 10.5
RL = 2 kΩ 12
RL = 1 kΩ –10.5 –13
RL = 2 kΩ –12 –13.5
VO = ±11 V, RL = 2 kΩ 2.5 45
VO = ±10 V, RL = 1 kΩ 3.5 38

min, RS = 50 Ω 98 115 dB

ICR

= ±4 V to ±18 V, RS = 50 Ω 94 120 dB

CC±

= 50

S

TLE2227Y

MIN TYP MAX

0.006 1 µV/mo

7.5 90 nA

–11

–13

to

to

11

13

V

operating characteristics, V

SR Slew rate RL = 2 kΩ, CL = 100 pF 1.7 2.5 V/µs

p

N(PP)

THD Total harmonic distortion
B

1

B

OM

φ

m

NOTE 5 Measured distortion of the source used in the analysis is 0.002%.

Unity-gain bandwidth RL = 2 kΩ, CL = 100 pF 7 13 MHz
Maximum output-swing bandwidth RL = 2 kΩ 30 kHz
Phase margin RL = 2 kΩ CL = 100 pF 40°

p

p

p

= ±15 V, TA = 25°C

CC±

TLE2227Y

MIN TYP MAX

RS = 20 Ω, f = 10 Hz 3.3 8
RS = 20 Ω, f = 1 kHz 2.5 4.5

= 0.1 Hz to 10 Hz
f = 10 Hz 1.5 4
f = 1 kHz 0.4 0.6
VO = ±10 V,

See Note 5

AVD = 1,

<0.002%

n

p

10

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

PARAMETER

TEST CONDITIONS

UNIT

V

0

R

50 Ω

V

Maximum positive peak output voltage swing

V

V

Maximum negative peak output voltage swing

V

AVDLarge-signal differential voltage amplification

V/µV

PARAMETER

TEST CONDITIONS

UNIT

VnEquivalent input noise voltage

V/√H

InEquivalent input noise current

A/√H

TLE2227, TLE2227Y, TLE2237, TLE2237Y

EXCALIBUR LOW-NOISE HIGH-SPEED

PRECISION DUAL OPERATIONAL AMPLIFIERS

SLOS184 – FEBRUARY 1997

electrical characteristics at specified free-air temperature V

V

IO

I

IO

I

IB

V

ICR

OM+

OM–

C

i

z

O

CMRR Common-mode rejection ratio VIC = V
k

SVR

I

CC

NOTE 4. T ypical values are based on the input of fset voltage shift observed through 168 hours of operating life test at TA = 150°C extrapolated

Input offset voltage 100 350 µV
Input offset voltage long-term drift (see Note 4)
Input offset current
Input bias current 15 90 nA

Common-mode input voltage range RS = 50 Ω

p

p

Input capacitance 8 pF
Open-loop output impedance IO = 0 50 Ω

Supply-voltage rejection ratio (∆V
Supply current VO = 0, No load 7.3 10.6 mA

to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.

p

p

p

p

/∆VIO) V

CC±

,

=

IC

RL = 1 kΩ 10.5
RL = 2 kΩ 12
RL = 1 kΩ –10.5 –13
RL = 2 kΩ –12 –13.5
VO = ±11 V, RL = 2 kΩ 2.5 45
VO = ±10 V, RL = 1 kΩ 3.5 38

min, RS = 50 Ω 98 115 dB

ICR

= ±4 V to ±18 V , RS = 50 Ω 94 120 dB

CC±

= ±15 V (unless otherwise noted)

CC±

TLE2237Y

MIN TYP MAX

=

S

0.006 1 µV/mo

7.5 90 nA

–11

–13

to

11

to

13

V

operating characteristics at specified free-air temperature V

SR Slew rate RL = 2 kΩ, CL = 100 pF 4 5 V/µs

p

V

n(PP)

THD Total harmonic distortion VO = ±10 V, AVD = 1, See Note 5 <0.002%
B

1

B

OM

φ

m

NOTE 5. Measured distortion of the source used in the analysis is 0.002%.

Peak-to-peak equivalent input noise voltage f = 0.1 Hz to 10 Hz 50 250 nV

p

Unity-gain bandwidth RL = 2 kΩ, CL = 100 pF 35 50 MHz
Maximum output-swing bandwidth RL = 2 kΩ 80 kHz
Phase margin RL = 2 kΩ, CL = 100 pF 40 °

RS = 20 Ω, f = 10 Hz 3.3 8
RS = 20 Ω, f = 1 kHz 2.5 4.5

f = 10 Hz 1.5 4
f = 1 kHz 0.4 0.6

CC±

= ±15 V

TLE2237Y

MIN TYP MAX

n

p

z

z

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

11

TLE2227, TLE2227Y, TLE2237, TLE2237Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS

SLOS184 – FEBRUARY 1997

PARAMETER MEASUREMENT INFORMATION

4 kΩ

15 V

–

V

+

I

–15 V

NOTE A: CL includes fixture capacitance.

CL = 100 pF

(see Note A)

Figure 1. Slew-Rate Test Circuit

10 kΩ

100 Ω

V

I

NOTE A: CL includes fixture capacitance.

–

+

15 V

–15 V

CL = 100 pF

(see Note A)

Figure 3. Unity-Gain Bandwidth and

Phase-Margin Test Circuit

V

4 kΩ

2 kΩ

15 V

–

V

O

+

–15 V

20 Ω20 Ω

O

Figure 2. Noise-Voltage Test Circuit

15 V

–

V

2 kΩ

O

V

+

I

–15 V

NOTE A: CL includes fixture capacitance.

CL = 100 pF

(see Note A)

V

O

2 kΩ

Figure 4. Small-Signal Pulse-

Response Test Circuit

12

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

TLE2227, TLE2227Y, TLE2237, TLE2237Y

EXCALIBUR LOW-NOISE HIGH-SPEED

PRECISION DUAL OPERATIONAL AMPLIFIERS

SLOS184 – FEBRUARY 1997

TYPICAL CHARACTERISTICS

Table of Graphs

FIGURE

V

IO

∆V

IO

I

IO

I

IB

I

I

V

O(PP)

V

OM

V

OM

A

VD

z

o

CMRR Common-mode rejection ratio vs Frequency 24
k

SVR

I

OS

I

CC

V

n

B

1

SR Slew rate vs Free-air temperature 44, 45

φ

m

Input offset voltage Distribution 5
Input offset voltage change vs Time after power on 6, 7
Input offset current vs Free-air temperature 8

Input bias current
Input current vs Differential input voltage 11

Maximum peak-to-peak output voltage vs Frequency 12
Maximum peak positive output voltage

Maximum peak negative output voltage

Large-signal differential voltage amplification

Output impedance vs Frequency 23

Supply-voltage rejection ratio vs Frequency 25

Short-circuit output current

Supply current
Voltage-follower small-signal pulse response vs Time 34, 35

Voltage-follower large-signal pulse response vs Time 36, 37
Equivalent input noise voltage vs Frequency 38
Noise voltage (referred to input) Over 10-second interval 39

Unity-gain bandwidth

Phase margin
Phase shift vs Frequency 18, 20, 21

vs Common-mode input voltage
vs Free-air temperature

vs Load resistance
vs Free-air temperature

vs Load resistance
vs Free-air temperature

vs Supply voltage
vs Load resistance
vs Frequency
vs Free-air temperature

vs Supply voltage
vs Elasped time
vs Free-air temperature

vs Supply voltage
vs Free-air temperature

vs Supply voltage
vs Load capacitance

vs Supply voltage
vs Load capacitance

9

10

13
15

14
16

17
19

18, 20, 21

22

26, 27
28, 29
30, 31

32
33

40, 41
42, 43

46

47, 48

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

13

TLE2227, TLE2227Y, TLE2237, TLE2237Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS

SLOS184 – FEBRUARY 1997

TYPICAL CHARACTERISTICS

16

1568 Amplifiers Tested From 2 Wafer Lots

V

CC±

14

TA = 25°C
DW Package

12

10

8

6

4

Percentage of Amplifiers – %

2

0
–120

INPUT OFFSET VOLTAGE CHANGE

6

Vµ

5

DISTRIBUTION OF

INPUT OFFSET VOLTAGE

= ±15 V

0 120906030–30–60–90

VIO – Input Offset Voltage – µV

Figure 5

vs

TIME AFTER POWER ON

12

Vµ

10

8

6

4

2

IO

∆V

XVIO – Change In Input Offset Voltage – uV

0

0

20

V

CC±

VIC = 0

16

INPUT OFFSET VOLTAGE CHANGE

vs

TIME AFTER POWER ON

V

= ± 15 V

CC±

TA = 25°C
DW Package
Sample Size = 50 Units

t – Time After Power On – s

Figure 6

INPUT OFFSET CURRENT

vs

FREE-AIR TEMPERATURE

= ±15 V

605040302010

IO

∆V

XVIO – Change In Input Offset Voltage – uV

14

4

3

2

V

= ±15 V

CC±

1

0

0

t – Time After Power On – s

TA = 25°C
P Package
Sample Size = 50 Units
From 2 Wafer Lots

18016014012010080604020

Figure 7

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

12

8

IO

4

IIO – Input Offset Current – nA

I

0

0

10 30 40 50 60 7020

TA – Free-Air Temperature – ° C

Figure 8

ООООО

ООООО

TLE2227, TLE2227Y, TLE2237, TLE2237Y

EXCALIBUR LOW-NOISE HIGH-SPEED

PRECISION DUAL OPERATIONAL AMPLIFIERS

SLOS184 – FEBRUARY 1997

TYPICAL CHARACTERISTICS

INPUT BIAS CURRENT

COMMON-MODE INPUT VOLTAGE

40

V

= ±15 V

CC±

TA = 25°C

35

30

25

20

15

10

IB

I

IIB – Input Bias Current – nA

5

0

–12

VIC – Common-Mode Input Voltage – V

Figure 9

INPUT CURRENT

DIFFERENTIAL INPUT VOLTAGE

1

V

= ±15 V

CC±

VIC = 0

0.8
TA = 25°C

0.6

vs

vs

INPUT BIAS CURRENT

vs

FREE-AIR TEMPERATURE

20

V

= ±15 V

CC±

VIC = 0

16

12

8

4

0

IB

I

IIB – Input Bias Current – nA

–4

–8

12840–4–8

010 304050607020

TA – Free-Air Temperature – ° C

Figure 10

MAXIMUM PEAK-TO-PEAK

OUTPUT VOLTAGE

30

25

vs

FREQUENCY

V

= ±15 V

CC±

RL = 2 kΩ
TA = 25°C

0.4

0.2

0

–0.2

I

II – Input Current – mA

I

–0.4

–0.6

–0.8

–1

–1.8

VID – Differential Input Voltage – V

Figure 11

20

15

10

5

O(PP)

0

VO(PP) – Maximum Peak-to-Peak Output Voltage – V

1.81.20.60– 0.6–1.2

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

V

10 k

10 M1 M100 k

f – Frequency – Hz

Figure 12

15

TLE2227, TLE2227Y, TLE2237, TLE2237Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS

SLOS184 – FEBRUARY 1997

TYPICAL CHARACTERISTICS

14

12

10

8

6

4

2

OM +

VOM+ – Maximum Positive Peak Output Voltage – V

0

V

100

V

= ±15 V

CC±

TA = 25°C

MAXIMUM POSITIVE PEAK

OUTPUT VOLTAGE

vs

LOAD RESISTANCE

RL – Load Resistance – Ω

Figure 13

MAXIMUM NEGATIVE PEAK

OUTPUT VOLTAGE

vs

LOAD RESISTANCE

–14

–12

–10

–8

–6

–4

–2

V

= ±15 V

CC±

0

100

TA = 25°C

10 k1 k

RL – Load Resistance – Ω

OM –

VOM– – Maximum Negative Peak Output Voltage – V

10 k1 k

V

Figure 14

13.32

13.28

13.24

13.2

13.16

13.12

OM +

VOM+ – Maximum Positive Peak Output Voltage – V

13.08

V

MAXIMUM POSITIVE PEAK

OUTPUT VOLTAGE

vs

FREE-AIR TEMPERATURE

V

= ±15 V

CC±

RL = 2 kΩ

TA – Free-Air Temperature – ° C

Figure 15

706050403020100

–13.4

–13.45

–13.5

–13.55

–13.6

–13.65

–13.7

OM –

–13.75

VOM– – Maximum Negative Peak Output Voltage – V

V

MAXIMUM NEGATIVE PEAK

OUTPUT VOLTAGE

vs

FREE-AIR TEMPERATURE

V

CC±

RL = 2 kΩ

TA – Free-Air Temperature – ° C

Figure 16

= ±15 V

706050403020100

16

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

Á

Á

TLE2227, TLE2227Y, TLE2237, TLE2237Y

EXCALIBUR LOW-NOISE HIGH-SPEED

PRECISION DUAL OPERATIONAL AMPLIFIERS

SLOS184 – FEBRUARY 1997

TYPICAL CHARACTERISTICS

LARGE-SIGNAL DIFFERENTIAL

VOLTAGE AMPLIFICATION

vs

SUPPLY VOLTAGE

50

TA = 25°C

Vµ

40

V/

30

20

Voltage Amplification –

VD

A

AVD – Large-Signal differential

10

0

0

| V

| – Supply Voltage – V

CC±

Figure 17

LARGE-SIGNAL DIFFERENTIAL VOLTAGE

AMPLIFICATION AND PHASE SHIFT

FREQUENCY

160

RL = 2 kΩ

RL = 1 kΩ

20161284

vs

75°

120

A

VD

100

80

60

Voltage Amplification – dB

VD

40

A

AVD – Large-Signal Differential

20

0

0.1

V

= ±15 V

CC±

RL = 2 kΩ
CL = 100 pF
TA = 25°C

f – Frequency – Hz

Figure 18

Phase Shift

100°140

125°

150°

175°

Phase Shift

200°

225°

250°

100 k100

275°

100 M

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

17

TLE2227, TLE2227Y, TLE2237, TLE2237Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS

SLOS184 – FEBRUARY 1997

TYPICAL CHARACTERISTICS

LARGE-SIGNAL DIFFERENTIAL

VOLTAGE AMPLIFICATION

vs

LOAD RESISTANCE

50

V

= ±15 V

CC±

TA = 25°C

Vµ

40

V/

30

20

Voltage Amplification –

VD

A

AVD – Large-Signal differential

10

0

100

RL – Load Resistance – Ω

Figure 19

LARGE-SIGNAL DIFFERENTIAL VOLTAGE

AMPLIFICATION AND PHASE SHIFT

FREQUENCY

6

3

0

–3

–6

–9

Voltage Amplification – dB

VD

–12

A

AVD – Large-Signal Differential

–15

–18

10

Phase Shift

V

= ±15 V

CC±

RL = 2 kΩ
CL = 100 pF
TA = 25°C

f – Frequency – MHz

1 k 4 k400

TLE2227

vs

10 k

100°

125°

150°

100

175°

200°

225°

250°

275°

300°

Phase Shift

A

VD

704020

18

Figure 20

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

TLE2227, TLE2227Y, TLE2237, TLE2237Y

EXCALIBUR LOW-NOISE HIGH-SPEED

PRECISION DUAL OPERATIONAL AMPLIFIERS

SLOS184 – FEBRUARY 1997

TYPICAL CHARACTERISTICS

TLE2037

LARGE-SIGNAL DIFFERENTIAL VOLTAGE

AMPLIFICATION AND PHASE SHIFT

vs

FREQUENCY

30

100°

100

125°

150°

175°

200°

225°

250°

275°

300°

Phase Shift

25

20

15

10

5

Voltage Amplification – dB

VD

0

A

AVD – Large-Signal Differential

– 10

– 5

V

CC±

RL = 2 kΩ
CL = 100 pF
TA = 25°C

1

Phase Shift

= ±15 V

f – Frequency – MHz

A

VD

40104

Figure 21

LARGE-SCALE DIFFERENTIAL

VOLTAGE AMPLIFICATION

vs

FREE-AIR TEMPERATURE

60

V

= ±15 V

CC±

55

Vµ

V/

50

100

V

CC±

TA = 25°C

Ω

10

OUTPUT IMPEDANCE

vs

FREQUENCY

= ±15 V

AVD = 100

45

40

Voltage Amplification –

VD

A

AVD – Large-Signal Differential

35

30

0

TA – Free-Air Temperature – ° C

Figure 22

RL = 2 kΩ

RL = 1 kΩ

1

AVD = 10

o

zo – Output Impedance – O

z

0.1

0.01

70605040302010

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

10

AVD = 1

f – Frequency – Hz

Figure 23

10 M1 M100 k10 k1 k100

100 M

19

TLE2227, TLE2227Y, TLE2237, TLE2237Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS

SLOS184 – FEBRUARY 1997

TYPICAL CHARACTERISTICS

COMMON-MODE REJECTION RATIO

vs

FREQUENCY

140

120

100

80

60

40

20

CMRR – Common-Mode Rejection Ratio – dB

0

10

f – Frequency – Hz

V

CC±

TA = 25°C

Figure 24

= ±15 V

10 M1 M100 k10 k1 k100

100 M

SUPPLY-VOLTAGE REJECTION RATIO

140

120

100

80

60

40

20

SVR

XXXX – Supply-Voltage Rejection Ratio – dB

k

0

10

f – Frequency – Hz

Figure 25

vs

FREQUENCY

k

SVR–

k

SVR+

V

= ±15 V

CC±

TA = 25°C

10 M1 M100 k10 k1 k100

100 M

SHORT-CIRCUIT OUTPUT CURRENT

vs

SUPPLY VOLTAGE

– 42

– 40

– 38

– 36

– 34

VID = 100 mV

– 32

– 30

VO = 0
TA = 25°C
P Package

0

|V

| – Supply Voltage – V

CC±

OS

IOS – Short-Circuit Output Current – mA

I

Figure 26

SHORT-CIRCUIT OUTPUT CURRENT

SUPPLY VOLTAGE

34

VID = –100 mV
VO = 0

33

TA = 25°C
P Package

32

31

30

29

28

27
26

OS

IOS – Short-Circuit Output Current – mA

I

25
24

2018161412108642

0

|V

CC±

vs

2018161412108642

| – Supply Voltage – V

Figure 27

20

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

TLE2227, TLE2227Y, TLE2237, TLE2237Y

EXCALIBUR LOW-NOISE HIGH-SPEED

PRECISION DUAL OPERATIONAL AMPLIFIERS

SLOS184 – FEBRUARY 1997

TYPICAL CHARACTERISTICS

SHORT-CIRCUIT OUTPUT CURRENT

vs

ELAPSED TIME

– 45

– 43

– 41

– 39

– 37

OS

IOS – Short-Circuit Output Current – mA

I

– 35

V

CC±

VID = 100 mV
VO = 0

TA = 25°C
P Package

0

= ±15 V

t – Time – s

Figure 28

SHORT-CIRCUIT OUTPUT CURRENT

vs

FREE-AIR TEMPERATURE

–55

–53

–51

150120906030

V

= ±15 V

CC±

VID = 100 mV
VO = 0

P Package

180

SHORT-CIRCUIT OUTPUT CURRENT

vs

ELAPSED TIME

36

V

= ±15 V

CC±

VID = –100 mV
VO = 0

34

TA = 25°C
P Package

32

30

28

OS

IOS – Short-Circuit Output Current – mA

I

26

0

t – Time – s

Figure 29

SHORT-CIRCUIT OUTPUT CURRENT

vs

FREE-AIR TEMPERATURE

42

V

= ±15 V

CC±

VID = –100 mV

41

VO = 0
P Package

40

150120906030

180

–49

–47

–45

–43

OS

IOS – Short-Circuit Output Current – mA

I

–41

0

TA – Free-Air Temperature – ° C

Figure 30

39

38

37

36

OS

IOS – Short-Circuit Output Current – mA

I

35

605040302010

70

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

TA – Free-Air Temperature – ° C

706050403020100

Figure 31

21

TLE2227, TLE2227Y, TLE2237, TLE2237Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS

SLOS184 – FEBRUARY 1997

TYPICAL CHARACTERISTICS

SUPPLY CURRENT

SUPPLY VOLTAGE

10

VO = 0
No Load

8

6

4

CC

ICC – Supply Current – mA

I

2

0

0

|V

| – Supply Voltage – V

CC±

Figure 32

vs

TA = 70°C

TA = 25°C

SUPPLY CURRENT

vs

FREE-AIR TEMPERATURE

8

V

= ±15 V

CC±

VO = 0
No Load

7.8

7.6

7.4

7.2

CC

ICC – Supply Current – mA

I

7

2018161412108642

6.8
706050403020100

TA – Free-Air Temperature – ° C

Figure 33

100

O

V) – Output Voltage – mV

–50

V

–100

50

TLE2227

VOLTAGE-FOLLOWER

SMALL-SIGNAL

PULSE RESPONSE

V

= ±15 V

CC±

RL = 2 kΩ
CL = 100 pF
TA = 25°C
See Figure 4

0

2000

t – Time – ns

800600400

1000

100

O

V) – Output Voltage – mV

–50

V

–100

50

0

Figure 34

TLE2237

VOLTAGE-FOLLOWER

SMALL-SIGNAL

PULSE RESPONSE

V

= ±15 V

CC±

AVD = 5
RL = 2 kΩ
CL = 100 pF
TA = 25°C

t – Time – ns

Figure 35

300100 4002000

22

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

TLE2227, TLE2227Y, TLE2237, TLE2237Y

EXCALIBUR LOW-NOISE HIGH-SPEED

PRECISION DUAL OPERATIONAL AMPLIFIERS

SLOS184 – FEBRUARY 1997

TYPICAL CHARACTERISTICS

15

10

5

0

–5

O

V) – Output Voltage – V

V

–10

–15

V

= ±15 V

CC±

RL = 2 kΩ
CL = 100 pF
TA = 25°C
See Figure 1

TLE2227

VOLTAGE-FOLLOWER

LARGE-SIGNAL

PULSE RESPONSE

t – Time – µs

Figure 36

TLE2237

VOLTAGE-FOLLOWER

LARGE-SIGNAL

PULSE RESPONSE

15

V

= ±15 V

CC±

AVD = 5
RL = 2 kΩ

10

CL = 100 pF
TA = 25°C
See Figure 1

5

0

–5

O

V) – Output Voltage – V

V

–10

–15

250 5 10 15 20

t – Time – µs

1002468

Figure 37

EQUIVALENT INPUT NOISE VOLTAGE

10

nV/ Hz

8

6

4

2

n

Vn – Equivalent Input Noise Voltage – nV/Hz

V

0

1

vs

FREQUENCY

V
RS = 20 Ω
TA = 25°C
See Figure 2

f – Frequency – Hz

Figure 38

CC±

= ±15 V

10 k1 k10010

100 k

50

40

30

20

10

0

– 10

Noise Voltage – nV

– 20

– 30

– 40

– 50

0

NOISE VOLTAGE

(REFERRED TO INPUT)

OVER A 10-SECOND INTERVAL

V

= ±15 V

CC±

f = 0.1 to 10 Hz
TA = 25°C

t – Time – s

Figure 39

8642

10

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

23

TLE2227, TLE2227Y, TLE2237, TLE2237Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS

SLOS184 – FEBRUARY 1997

TYPICAL CHARACTERISTICS

TLE2227

UNITY-GAIN BANDWIDTH

vs

UNITY-GAIN BANDWIDTH

SUPPLY VOLTAGE

20

RL = 2 kΩ
CL = 100 pF
TA = 25°C

18

See Figure 3

16

14

1

12

B1 – Unity-Gain Bandwidth – MHzB

10

0

| V

| – Supply Voltage – V

CC±

2018161412108642

52

f = 100 kHZ
RL = 2 kΩ
CL = 100 pF
TA = 25°C

51

50

49

1

B1 – Unity-Gain Bandwidth – MHzB

48

0

| V

Figure 40

TLE2237

vs

SUPPLY VOLTAGE

| – Supply Voltage – V

CC±

Figure 41

2018161412108642

TLE2227

UNITY-GAIN BANDWIDTH

UNITY-GAIN BANDWIDTH

vs

LOAD CAPACITANCE

B1 – Unity-Gain Bandwidth – MHzB

1

52

51

50

49

48

100

V

= ±15 V

CC±

RL = 2 kΩ
TA = 25°C

CL – Load Capacitance – pF

16

12

8

4

1

B1 – Unity-Gain Bandwidth – MHzB

0

100

CL – Load Capacitance – pF

1000

V

= ±15 V

CC±

RL = 2 kΩ
TA = 25°C
See Figure 3

10000

Figure 42

TLE2237

vs

LOAD CAPACITANCE

1000 10000

Figure 43

24

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

TLE2227, TLE2227Y, TLE2237, TLE2237Y

EXCALIBUR LOW-NOISE HIGH-SPEED

PRECISION DUAL OPERATIONAL AMPLIFIERS

SLOS184 – FEBRUARY 1997

TYPICAL CHARACTERISTICS

TLE2227

SLEW RATE

vs

FREE-AIR TEMPERATURE

3

V

= ±15 V

CC±

AVD = 5
RL = 2 kΩ

2.8

CL = 100 pF
See Figure 1

2.6

2.4

SR – Slew Rate – V/usµsV/

2.2

2

TA – Free-Air Temperature – ° C

706050403020100

8

V
AVD = 5
RL = 2 kΩ

7

CL = 100 pF
See Figure 1

6

5

SR – Slew Rate – V/usµsV/

4

3

FREE-AIR TEMPERATURE

= ±15 V

CC±

TA – Free-Air Temperature – ° C

Figure 44

TLE2237

SLEW RATE

vs

706050403020100

Figure 45

40°

RL = 2 kΩ
CL = 100 pF

38°

TA = 25°C
See Figure 3

36°

34°

32°

30°

m

φ

om – Phase Margin

28°

26°

24°

0

PHASE MARGIN

SUPPLY VOLTAGE

| V

| – Supply Voltage – V

CC±

Figure 46

vs

TLE2227

PHASE MARGIN

vs

LOAD CAPACITANCE

40°

35°

30°

25°

20°

m

om – Phase Margin

15°

φ

10°

5°

0°

2018161412108642

100

CL – Load Capacitance – pF

1000 10000

V

= ±15 V

CC±

RL = 2 kΩ
TA = 25°C
See Figure 3

Figure 47

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

25

TLE2227, TLE2227Y, TLE2237, TLE2237Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS

SLOS184 – FEBRUARY 1997

TYPICAL CHARACTERISTICS

TLE2237

PHASE MARGIN

LOAD CAPACITANCE

70°

V

= ±15 V

CC±

RL = 2 kΩ

60°

TA = 25°C

50°

40°

30°

m

om – Phase Margin

φ

20°

10°

vs

φ

m

0°

100

CL – Load Capacitance – pF

1000 10000

Figure 48

APPLICATION INFORMATION

TLE2227 macromodel information

Macromodel information provided was derived using Microsim
with Microsim

PSpice

. The Boyle macromodel (see Note 6) and subcircuit in Figure 49 and Figure 50 are
generated using the TLE2227C typical electrical and operating characteristics at 25°C. Using this information,
output simulations of the following key parameters can be generated to a tolerance of 20% (in most cases):

D

Maximum positive output voltage swing

D

Maximum negative output voltage swing

D

Slew rate

D

Quiescent power dissipation

D

Input bias current

D

Open-loop voltage amplification

Parts

, the model generation software used

D

Unity-gain bandwidth

D

Common-mode rejection ratio

D

Phase margin

D

DC output resistance

D

AC output resistance

D

Short-circuit output current limit

NOTE 6: G. R. Boyle, B. M. Cohn, D. O. Pederson, and J. E. Solomon,“Macromodeling of Integrated Circuit Operational Amplifiers”,

PSpice

Macromodels, simulation models, or other models provided by TI,
directly or indirectly, are not warranted by TI as fully representing all
of the specification and operating characteristics of the
semiconductor product to which the model relates.

26

of Solid-State Circuits

and

Parts

are trademarks of MicroSim Corporation.

, SC-9, 353 (1974).

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

IEEE Journal

APPLICATION INFORMATION

TLE2227 macromodel information (continued)

c1

4

3

rc2

12

vc

14

re2re1

10

ve

ceeree

dc

de

54

+–

V

V

CC+

IN+
IN–

CC–

rp

1

2

dp

rc1

11

Q1 Q2

13

lee

TLE2227, TLE2227Y, TLE2237, TLE2237Y

EXCALIBUR LOW-NOISE HIGH-SPEED

PRECISION DUAL OPERATIONAL AMPLIFIERS

SLOS184 – FEBRUARY 1997

99

vb

+

fb

–

C2

ga

7

vlim

ro2

8

5

hlim

OUT

+

–

ro1

90

+

–

egnd

9

+

+

r2

–

53

–

6

gcm

dip

91

+

–

dln

92
–

vip

+

vin

Figure 49. Boyle Macromodel

.subckt TLE2227 1 2 3 4 5
*
c1 11 12 4.003E-12
c2 6 7 20.00E-12
dc 5 53 dx
de 54 5 dx
dlp 90 91 dx
dln 92 90 dx
dp 4 3 dx
egnd 99 0 poly(2) (3,0) (4,0) 0 .5 .5
fb 7 99 poly(5) vb vc ve vlp vln 0 954.8E6 –1E9 1E9 1E9 –1E9
ga 6 0 11 12 2.062E-3
gcm 0 6 10 99 531.3E-12
iee 10 4 dc 56.01E-6
hlim 90 0 vlim 1K
q1 11 2 13 qx
q2 12 1 14 qx
r2 6 9 100.0E3
rc1 3 11 530.5
rc2 3 12 530.5
re1 13 10 –393.2
re2 14 10 –393.2
ree 10 99 3.571E6
ro1 8 5 25
ro2 7 99 25
rp 3 4 8.013E3
vb 9 0 dc 0
vc 3 53 dc 2.400
ve 54 4 dc 2.100
vlim 7 8 dc 0
vlp 91 0 dc 40
vln 0 92dc40
.model dx D(Is=800.0E-18)
.model qx NPN(Is=800.0E-18 Bf=7.000E3)
.ends

Figure 50. TLE2227 Macromodel Subcircuit

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

27

TLE2227, TLE2227Y, TLE2237, TLE2237Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS

SLOS184 – FEBRUARY 1997

TLE2037 macromodel information

Macromodel information provided is derived using

PSpice Parts

 model generation software. The Boyle
macromodel (see Note 6) and subcircuit in Figure 51 and Figure 52 are generated using the TLE2237C typical
electrical and operating characteristics at 25°C. Using this information, output simulations of the following key
parameters can be generated to a tolerance of 20% (in most cases):

D

Maximum positive output voltage swing

D

Maximum negative output voltage swing

D

Slew rate

D

Quiescent power dissipation

D

Input bias current

D

Open-loop voltage amplification

NOTE 6. G. R. Boyle, B. M. Cohn, D. O. Pederson, and J. E. Solomon,“Macromodeling of Integrated Circuit Operational Amplifiers,”

V

V

of Solid-State Circuits

CC+

1

IN+

IN–

2

CC–

dp

, SC-9, 353 (1974).

3

rp

rc1

11

Q1 Q2

13

lee

c1

4

rc2

14

re2re1

12

10

ve

+

vc

ceeree

dc

de

54

+–

r2

–

53

D

Unity-gain bandwidth

D

Common-mode rejection ratio

D

Phase margin

D

DC output resistance

D

AC output resistance

D

Short-circuit output current limit

99

vb

+

fb

–

C2

ga

7

vlim

ro2

8

5

hlim

OUT

+

–

ro1

90

+

–

egnd

9

+

–

6

gcm

dlp

91
+

–

dln

vlp

IEEE Journal

92
–

vln

+

Macromodels, simulation models, or other models provided by TI,
directly or indirectly, are not warranted by TI as fully representing all
of the specification and operating characteristics of the
semiconductor product to which the model relates.

28

Figure 51. Boyle Macromodel

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

TLE2227, TLE2227Y, TLE2237, TLE2237Y

EXCALIBUR LOW-NOISE HIGH-SPEED

PRECISION DUAL OPERATIONAL AMPLIFIERS

SLOS184 – FEBRUARY 1997

APPLICATION INFORMATION

TLE2037 macromodel information (continued)

.subckt TLE2227 1 2 3 4 5
*
c1 11 12 4.003E-12
c2 6 7 20.00E-12
dc 5 53 dx
de 54 5 dx
dlp 90 91 dx
dln 92 90 dx
dp 4 3 dx
egnd 99 0 poly(2) (3,0) (4,0) 0 .5 .5
fb 7 99 poly(5) vb vc ve vlp vln 0 954.8E6 –1E9 1E9 1E9 –1E9
ga 6 0 11 12 2.062E-3
gcm 0 6 10 99 531.3E-12
iee 10 4 dc 56.01E-6
hlim 90 0 vlim 1K
q1 11 2 13 qx
q2 12 1 14 qx
r2 6 9 100.0E3
rc1 3 11 530.5
rc2 3 12 530.5
re1 13 10 –393.2
re2 14 10 –393.2
ree 10 99 3.571E6
ro1 8 5 25
ro2 7 99 25
rp 3 4 8.013E3
vb 9 0 dc 0
vc 3 53 dc 2.400
ve 54 4 dc 2.100
vlim 7 8 dc 0
vlp 91 0 dc 40
vln 0 92dc40
.model dx D(Is=800.0E-18)
.model qx NPN(Is=800.0E-18 Bf=7.000E3)
.ends

Figure 52. TLE2237 Macromodel Subcircuit

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

29

TLE2227, TLE2227Y, TLE2237, TLE2237Y
EXCALIBUR LOW-NOISE HIGH-SPEED
PRECISION DUAL OPERATIONAL AMPLIFIERS

SLOS184 – FEBRUARY 1997

APPLICATION INFORMATION

voltage-follower applications

The TLE22x7C circuitry includes input-protection diodes to limit the voltage across the input transistors;
however, no provision is made in the circuit to limit the current if these diodes are forward biased. This condition
can occur when the device is operated in the voltage-follower configuration and driven with a fast, large-signal
pulse. A feedback resistor is recommended to limit the current to a maximum of 1 mA to prevent degradation
of the device. Also, this feedback resistor forms a pole with the input capacitance of the device. For feedback
resistor values greater than 10 kΩ, this pole degrades the amplifier’s phase margin. This problem can be
alleviated by adding a capacitor (20 pF to 50 pF) in parallel with the feedback resistor (see Figure 53).

CF = 20 to 50 pF

IF ≤ 1 mA

R

F

V

CC+

–

V

O

V

I

+

V

CC–

Figure 53. Voltage-Follower Circuit

30

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

IMPORTANT NOTICE

T exas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.

TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. T esting and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty . Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.

CERT AIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF
DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR
WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICA TIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERST OOD TO
BE FULLY AT THE CUSTOMER’S RISK.

In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.

TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.

Copyright  1998, Texas Instruments Incorporated