Page 1
INTEGRATED CIRCUITS
DATA SH EET
TDA7050
Low voltage mono/stereo power
amplifier
Product specification
File under Integrated Circuits, IC01
June 1989
Page 2
Philips Semiconductors Product specification
Low voltage mono/stereo power amplifier TDA7050
GENERAL DESCRIPTION
The TDA7050 is a low voltage audio amplifier for small radios with headphones (such as watch, pen and pocket radios)
in mono (bridge-tied load) or stereo applications.
Features
• Limited to battery supply application only (typ. 3 and 4 V)
• Operates with supply voltage down to 1,6 V
• No external components required
• Very low quiescent current
• Fixed integrated gain of 26 dB, floating differential input
• Flexibility in use − mono BTL as well as stereo
• Small dimension of encapsulation (see package design example)
QUICK REFERENCE DATA
Supply voltage range V
Total quiescent current (at V
= 3 V) I
P
P
tot
1,6 to 6,0 V
typ. 3,2 mA
Bridge tied load application (BTL)
Output power at RL = 32 Ω
V
= 3 V; d
P
= 10% P
tot
o
typ. 140 mW
D.C. output offset voltage between the outputs |∆V| max. 70 mV
Noise output voltage (r.m.s. value)
at f = 1 kHz; R
= 5 kΩ V
S
no(rms)
typ. 140 µV
Stereo application
Output power at R
= 10%; VP = 3 V P
d
tot
d
= 10%; VP = 4,5 V P
tot
Channel separation at R
= 32 Ω
L
o
o
= 0 Ω; f = 1 kHz α typ. 40 dB
S
typ. 35 mW
typ. 75 mW
Noise output voltage (r.m.s. value)
at f = 1 kHz; RS = 5 kΩ V
no(rms)
typ. 100 µV
PACKAGE OUTLINE
8-lead DIL; plastic (SOT97); SOT97-1; 1996 July 23.
June 1989 2
Page 3
Philips Semiconductors Product specification
Low voltage mono/stereo power amplifier TDA7050
RATINGS
Limiting values in accordance with the Absolute Maximum System (IEC 134)
Supply voltage V
Peak output current I
P
OM
Total power dissipation see derating curve Fig.1
Storage temperature range T
Crystal temperature T
stg
c
A.C. and d.c. short-circuit duration
at VP = 3,0 V (during mishandling) t
sc
max. 6 V
max. 150 mA
−55 to + 150 °C
max. 100 °C
max. 5 s
Fig.1 Power derating curve.
THERMAL RESISTANCE
From junction to ambient R
June 1989 3
= 110 K/W
thj-a
Page 4
Philips Semiconductors Product specification
Low voltage mono/stereo power amplifier TDA7050
CHARACTERISTICS
V
= 3 V; f = 1 kHz; RL = 32 Ω; T
P
PARAMETER SYMBOL MIN. TYP. MAX. UNIT
Supply
Supply voltage V
Total quiescent current I
Bridge-tied load application (BTL); see Fig.4
Output power; note 1
V
= 3,0 V; d
P
V
= 4,5 V; d
P
= 10% P
tot
= 10% (RL = 64 Ω)P
tot
Voltage gain G
Noise output voltage (r.m.s. value)
RS= 5 kΩ; f = 1 kHz V
R
= 0 Ω; f = 500 kHz; B = 5 kHz V
S
D.C. output offset voltage (at R
Input impedance (at R
= ∞)|Z
S
Input bias current I
Stereo application; see Fig.5
Output power; note 1
V
= 3,0 V; d
P
V
= 4,5 V; d
P
= 10% P
tot
= 10% P
tot
Voltage gain G
Noise output voltage (r.m.s. value)
R
= 5 kΩ; f = 1 kHz V
S
R
= 0 Ω; f = 500 kHz; B = 5 kHz V
S
Channel separation
R
= 0 Ω; f = 1 kHz α 30 40 − dB
S
Input impedance (at R
= ∞)|Z
S
Input bias current I
= 25 °C; unless otherwise specified
amb
P
tot
o
o
v
no(rms)
no(rms)
= 5 kΩ)|∆V| −−70 mV
S
|1 −−MΩ
i
i
o
o
v
no(rms)
no(rms)
|2 −−MΩ
i
i
1,6 − 6,0 V
− 3,2 4 mA
− 140 − mW
−150 − mW
− 32 − dB
− 140 −µV
− tbf −µV
− 40 − nA
− 35 − mW
− 75 − mW
24.5 26 27.5 dB
− 100 −µV
− tbf −µV
− 20 − nA
Note
1. Output power is measured directly at the output pins of the IC. It is shown as a function of the supply voltage in Fig.2
(BTL application) and Fig.3 (stereo application).
June 1989 4
Page 5
Philips Semiconductors Product specification
Low voltage mono/stereo power amplifier TDA7050
Fig.2 Output power across the load impedance (RL) as a function of supply voltage (VP) in BTL application.
Measurements were made at f = 1 kHz; d
= 10%; T
tot
amb
= 25 °C.
Fig.3 Output power across the load impedance (RL) as a function of supply voltage (VP) in stereo application.
Measurements were made at f = 1 kHz; d
= 10%; T
tot
amb
= 25 °C.
June 1989 5
Page 6
Philips Semiconductors Product specification
Low voltage mono/stereo power amplifier TDA7050
APPLICATION INFORMATION
Fig.4 Application diagram (BTL); also used as test circuit.
Fig.5 Application diagram (stereo); also used as test circuit.
June 1989 6
Page 7
Philips Semiconductors Product specification
Low voltage mono/stereo power amplifier TDA7050
PACKAGE OUTLINE
DIP8: plastic dual in-line package; 8 leads (300 mil)
D
seating plane
A
L
Z
e
b
8
pin 1 index
1
w M
b
1
b
2
5
SOT97-1
M
E
A
2
A
c
(e )
1
M
H
E
1
DIMENSIONS (inch dimensions are derived from the original mm dimensions)
A
A
A
UNIT
max.
mm
inches
Note
1. Plastic or metal protrusions of 0.25 mm maximum per side are not included.
OUTLINE
VERSION
SOT97-1
12
min.
max.
050G01 MO-001AN
b
1.73
1.14
0.068
0.045
IEC JEDEC EIAJ
0.021
0.015
b
1
0.53
0.38
4
0 5 10 mm
scale
b
cD E e M
2
0.36
1.07
0.23
0.89
0.014
0.042
0.009
0.035
REFERENCES
0.39
0.36
June 1989 7
(1) (1)
9.8
9.2
6.48
6.20
0.26
0.24
L
e
1
M
3.60
8.25
3.05
7.80
0.14
0.32
0.12
0.31
EUROPEAN
PROJECTION
E
10.0
0.39
0.33
H
8.3
w
max.
0.2542.54 7.62
1.154.2 0.51 3.2
0.010.10 0.30
0.0450.17 0.020 0.13
ISSUE DATE
92-11-17
95-02-04
(1)
Z
Page 8
Philips Semiconductors Product specification
Low voltage mono/stereo power amplifier TDA7050
SOLDERING
Introduction
There is no soldering method that is ideal for all IC
packages. Wave soldering is often preferred when
through-hole and surface mounted components are mixed
on one printed-circuit board. However, wave soldering is
not always suitable for surface mounted ICs, or for
printed-circuits with high population densities. In these
situations reflow soldering is often used.
This text gives a very brief insight to a complex technology.
A more in-depth account of soldering ICs can be found in
our
“IC Package Databook”
Soldering by dipping or by wave
The maximum permissible temperature of the solder is
260 °C; solder at this temperature must not be in contact
with the joint for more than 5 seconds. The total contact
time of successive solder waves must not exceed
5 seconds.
DEFINITIONS
(order code 9398 652 90011).
The device may be mounted up to the seating plane, but
the temperature of the plastic body must not exceed the
specified maximum storage temperature (T
printed-circuit board has been pre-heated, forced cooling
may be necessary immediately after soldering to keep the
temperature within the permissible limit.
Repairing soldered joints
Apply a low voltage soldering iron (less than 24 V) to the
lead(s) of the package, below the seating plane or not
more than 2 mm above it. If the temperature of the
soldering iron bit is less than 300 °C it may remain in
contact for up to 10 seconds. If the bit temperature is
between 300 and 400 °C, contact may be up to 5 seconds.
stg max
). If the
Data sheet status
Objective specification This data sheet contains target or goal specifications for product development.
Preliminary specification This data sheet contains preliminary data; supplementary data may be published later.
Product specification This data sheet contains final product specifications.
Limiting values
Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or
more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation
of the device at these or at any other conditions above those given in the Characteristics sections of the specification
is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specification.
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices, or systems where malfunction of these
products can reasonably be expected to result in personal injury. Philips customers using or selling these products for
use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such
improper use or sale.
June 1989 8
Loading...