Page 1
Ordering number : EN6027
SPI-240-15-T1
Ultraminiature photointerrupter supporting reflow soldering
Features
• GaAs Infrared LED plus Darlington Phototransistor
• Photo-Interrupter for reflow soldering
• Compact type : H4.95 ✕ L6.0 ✕ W5.5mm
• Taping type
Absolute Maximum Ratings at Ta=25°C, 65%RH
Parameter Symbol Rating Unit
Forward Current I
Input LED
Output
Phototransistor
Reverse Voltage V
Power Dissipation P
Collector-Emitter Voltage V
Emitter-Collector Voltage V
Collector Curren I
Power Dissipation P
Operating Temperature Topr --20 to +80 °C
Storage Temperature Tstg --30 to +85 °C
F
R
D
CEO
ECO
C
C
GaAs Infrared LED
SPI-240-15-T1
(Darlington-transistor type)
50 mA
5V
70 mW
20 V
5V
20 mA
70 mW
Electro-Optical Characteristics at Ta=25°C, 65%RH
Parameter Symbol Condition Min. Typ. Max. Unit
Input
Forward Voltage V
Reverse Current I
Output Dark Current I
Collector Output Current I
Coupled
Collector Emitter
Saturation Voltage
Rise Time tr
Fall Time tf
1
*
Measurement Circuit of Collector Current
CEO
VCE(sat) IF=4mA, IC=250µA -- -- 1.2 V
IF=10mA 1.0 1.15 1.4 V
F
VR= 5 V -- -- 1 0 µ A
R
IF=0mA, VCE=10V -- -- 1 µA
IF=4mA, VCE=2V
C
VCC=5V, RL=100Ω
IC=10mA
IF=4mA
1
*
0.5 3 - - mA
-- 100 -- µs
-- 100 -- µs
VCE=2V
Ic
A
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
72199 GI, (MI
)
No.6027 1/7
Page 2
SPI-240-15-T1
Typical Characteristics
CAUTION
These numerical value show the electrical and optical characteristics of this product, and not assure this contents.
Forward Current vs. Ambient Temperature
60
50
(mA)Collector Current I
40
F
30
20
Forward Current I
10
0
-25 0 25 50 75 100
Ambient Temperature Ta (°C)
(Rating) (Rating)
Forward Current vs. Forward Voltage
500
Ta=75°C
100
(mA)
F
50
10
5
Forward Current I
1
0
50°C
25°C
0°C
--25°C
0.5 1 1.5 2
Forward Voltage VF (V)
Power Dissipation vs. Ambient Temperature
120
100
80
60
40
Power Dissipation P (mW)Relative Collector Current (%)
20
0
-25 0 25 50 75 100
Ambient Temperature Ta (°C)
Collector vs. Forward Current
20
VCE=2V
18
Ta=25°C
16
(mA)
14
C
12
10
8
6
Collector Current I
4
2
0
048121620
Forward Current IF (mA)
Collector Current vs. Collector-emitter Voltage
20
Ta=25°C
18
(µA)
16
14
C
12
10
8
6
4
2
0
IF=15mA
Pc(MAX)
10mA
7mA
4mA
2mA
0510
Collector-emitter Voltage VCE (V)
Relative Collector Current vs. Ambient Temperature
140
IF=4mA
VCE=2V
120
100
80
60
40
--25 0 25 50 75 100
Ambient Temperature Ta (°C)
No.6027 2/7
Page 3
SPI-240-15-T1
Typical Characteristics
CAUTION
These numerical value show the electrical and optical characteristics of this product, and not assure this contents.
Collector-emitter Saturation Voltage vs.
(V)
1.0
CE (sat)
0.9
0.8
0.7
0.6
Ambient Temperature
IF=4mA
IC=250µA
Collector Dark Current vs. Ambient Temperature
-5
10
VCE=10V
5
(A)
-6
10
CEO
5
-7
10
5
-8
10
5
Collector Dark Current I
0.5
Collector-emitter Saturation Voltage V
--25 0 25 50 75 100
Ambient Temperature Ta (°C)
-9
10
--25 0 25 50 75 100
Ambient Temperature Ta (°C)
Response Time vs. Load Resistance Test Circuit for Response Time
1000
IFP=10mA
500
VCC=2V
Ta=25°C
)
100
S
50
Response (µ
10
5
1
10 50 100 500 1k 5k 10k
t f
I
V
FP
t r
R
D
CC
I
R
L
FP
V
out
V
out
t
r
10%
90%
t
f
Load Resistance RL (Ω)
Relative Collector Current vs. Shield Distance (1) Relative Collector Current vs. Shield Distance (2)
120
100
IF=4mA
VCE=2V
Ta=25°C
120
100
IF=4mA
VCE=2V
Ta=25°C
80
60
40
Relative Collector Current (%)
20
0
--2 --1 0 1 2 3
Shield Distance d (mm)
d
Shield
--
+
0
Detector center
80
60
40
Relative Collector Current (%)
20
0
--2 --1 0 1 2 3
Shield Distance d (mm)
d
Shield
-0
+
Detector center
No.6027 3/7
Page 4
SPI-240-15-T1
0.6, Max 0.1
Pin No.
Pin connection
1
1. Ph. Tr Collector
2. Common (Cathode)
3. LED Anode
3
3.5
5.5
3-0.4
LED
2.5
2
Ph.Tr
2.8
2.7
2
0.25
1.5
6 ± 0.3
3 ± 0.3
1
0.25
4.5
1.5
1
C0.5
4.95
4.1
3.2
2
+ 0.1
0.25
Optical C / L
-- 0.2
Injection gate
2.5
Tolerance : ±0.2
Unit : mm
No.6027 4/7
Page 5
SPI-240-15-T1
Package dimensions and Pin connection
As stated in the sttached paper. (No.6027 4/7)
Soldering conditions
(1) Reflow soldering
The temperature of the reflow furnace is to be set in accordance with the following temperature profile.
Soldering must be done only one time.
Temperature : On the topsurface of product
Reflow type : Hot air
Max 220°C
180°C
Max 160°C
Max 5sec
Max 60sec
Max 40sec
(2) Manusl soldering
Temperature : Max. 290°C (Soldering iron tip temperature)
0.5mm
0.5mm
Time : Max. 3 sec
Clearance : Min. 0.5mm from package
PRECAUTIONS
(1) Bending a lead should avoid. However, when bending is necessary, take care the next items.
q Bending a lead must be done before soldering.
w Bending a lead must be done in the states of fixing leads and no stress for the regin part. Because it is possible that
stress for the regin part cause troubles such as gold wire breaking and so on.
e A lead must be bend under the stay.
r Do not bend the same position of leads more than twice.
(2) The hole pitch of a circuit board must fit to the recommended mounting dimension.
(3) Take core the following when soldering.
q Do not heat a product under any stress (a twist and so on) to leads.
w Do not heat a product in the states of operating force to the regin part.
(4) Use the flux which contain no chlorine, have no corrosion and do not need washing.
(5) Be careful that flux or other chemicals do not attach to the luminous surface and passive surface.
(6) Precautions of the product after the open dry packing
q The product after the open dry packing should be stored in the dry packing again.
The product should be kept under the conditions below, if the product is not stored in the dry paking.
Temperature : 5 to 30°C
Humidity : Max 70%RH
Term : Max 7days
w The product to be out the term without dry packing must be practiced baking.
Baking conditions : +60±5°C, 10 to 20Hr
(7) The reflow conditions must be confirmed that no problem by your reflow furnace.
No.6027 5/7
Page 6
Taping Specifications
SPI-240-15-T1
(1) Dimensions of tape
ø1.5
( ø1.7 )
4
(9.3)
(0.4)
(5.6)
(5.3)
2
1.75
7.5
16 ± 0.3
8
(3.5)
(6.1)
(2) Dimensions of reel
ø13
2
ø80 ± 1
ø330 ± 1
17 ± 1
22 ± 1
ø21
Unit : mm
No.6027 6/7
Page 7
SPI-240-15-T1
CAUTION
1. No products described or contained herein are intended for use in surgical implants, life-support systems,
aerospace equipment, nuclear power control systems, vehicles, disaster / crime-prevention equipment or
the like, and the failure of which may directly or indirectly cause injury, death or property loss.
2. Anyone purchasing any products described or contained herein for an above-mentioned use shall:
1) Accept full responsibility and indemnify and defend SANYO ELECTRIC CO.,LTD., it’s affiliates,
subsidiaries and distributors or any of their officers and employees, jointly and severally, against any
and all claims and litigation and all damages, costs and expenses associated with such use.
2) Not impose any responsibility for any fault or negligence which may be cited in any such claim or
litigation on SANYO ELECTRIC CO., LTD., it’s affiliates, subsidiaries and distributors or any of
their officers and employees jointly or severally.
3. Information (including circuit diagrams and circuit parameters) disclosed herein is for example only; it is not
guaranteed for mass production, SANYO believes the information disclosed herein is accurate and reliable,
but no guarantees are made or implied regarding it’s use or any infringements of intellectual property rights
or other rights of third parties.
Precautionary instructions in handling gallium arsenic products
Special precautions must be taken in handling this product because it contains, gallium arsenic, which is
designated as a toxic substance by law. Be sure to adhere strictly to all applicable laws and regulations
enacted for this substance, particularly when it comes to disposal.
Manufactured by ; Tottori SANYO Electric Co., Ltd.
LED Division
5-318, Tachikawa-cho, Tottori City, 680-8634 Japan
TEL: +81-857-21-2137 FAX: +81-857-21-2161
PS
No.6027 7/7
Loading...