Datasheet 74ABTH16240ADL, 74ABTH16240ADGG, 74ABT16240ADL, 74ABT16240ADGG Datasheet (Philips)
Page 1
INTEGRATED CIRCUITS
74ABT16240A
74ABTH16240A
16-bit inverting buffer/driver (3-State)
Product specification
Supersedes data of 1996 Oct 01
IC23 Data Handbook
1998 Feb 25
Page 2
Philips Semiconductors Product specification
Quiescent su ly current
16-bit inverting buffer/driver (3-State)
FEA TURES
•16-bit bus interface
•3-State buffers
•Output capability: +64mA/-32mA
•TTL input and output switching levels
•Input and output interface capability to systems at 5V supply
•Bus-hold data inputs eliminate the need for external pull-up
resistors to hold unused inputs
•Live insertion/extraction permitted
•Power-up 3-State
•74ABTH16240A incorporates bus hold data inputs which eliminate
the need for external pull up resistors to hold unused inputs
•Latch-up protection exceeds 500mA per JEDEC Std 17
•ESD protection exceeds 2000V per MIL STD 883 Method 3015
and 200V per Machine Model
QUICK REFERENCE DATA
SYMBOL PARAMETER
C
t
PLH
t
PHL
C
OUT
I
CCZ
I
CCL
IN
Propagation delay
nAx to nYx
CL = 50pF;
VCC =
Input capacitance nOE VI = 0V or 3.0V 4 pF
Output capacitance Outputs disabled; VO = 0V or 6 pF
pp
Outputs disabled; VCC = 500 µA
Outputs low; VCC = 5.5V 9 mA
74ABT16240A
74ABTH16240A
DESCRIPTION
The 74ABT16240A is a high-performance BiCMOS device which
combines low static and dynamic power dissipation with high speed
and high output drive.
This device is an inverting 16-bit buffer that is ideal for driving bus
lines. The device features four Output Enables (1OE
), each controlling four of the 3-State outputs.
4OE
Two options are available, 74ABT16240A which does not have the
bus hold feature and 74ABTH16240A which incorporates the bus
hold feature.
CONDITIONS
T
= 25°C
amb
TYPICAL UNIT
2.0
1.8
, 2OE, 3OE,
ns
ORDERING INFORMATION
PACKAGES TEMPERATURE RANGE OUTSIDE NORTH AMERICA NORTH AMERICA DWG NUMBER
48-Pin Plastic SSOP Type III –40°C to +85°C 74ABT16240A DL BT16240A DL SOT370-1
48-Pin Plastic TSSOP Type II –40°C to +85°C 74ABT16240A DGG BT16240A DGG SOT362-1
48-Pin Plastic SSOP Type III –40°C to +85°C 74ABTH16240A DL BH16240A DL SOT370-1
48-Pin Plastic TSSOP Type II –40°C to +85°C 74ABTH16240A DGG BH16240A DGG SOT362-1
LOGIC SYMBOL
1A0
47
1A1
46
1A2
44
1A3
43
1OE
1
2A0
41
2A1
40
2A2
38
2A3
37
2OE
48
1Y0
1Y1
1Y2
1Y3
2Y0
2Y1
2Y2
2Y3
3A0
2
36
3A1
3
35
3A2
5
33
3A3
6
32
3OE
25
4A0
8
30
4A1
9
29
4A2
11
27
4A3
26
12
4OE
24
3Y0
3Y1
3Y2
3Y3
4Y0
4Y1
4Y2
4Y3
13
14
16
17
19
20
22
23
1998 Feb 25 853-1880 19019
SH00090
2
Page 3
Philips Semiconductors Product specification
16-bit inverting buffer/driver (3-State)
LOGIC SYMBOL (IEEE/IEC)
1OE
2OE
3OE
4OE
1A1
1A2
1A3
1A4
2A1
2A2
2A3
2A4
3A1
3A2
3A3
3A4
4A1
4A2
4A3
4A4
1
48
25
24
47
46
44
43
41
40
38
37
36
35
33
32
30
29
27
26
EN1
EN2
EN3
EN4
2
1 ∇
1
2 ∇1
3 ∇1
4 ∇1
1Y1
3
1Y2
5
1Y3
6
1Y4
8
2Y1
9
2Y2
11
2Y3
12
2Y4
13
3Y1
14
3Y2
16
3Y3
17
3Y4
19
4Y1
20
4Y2
22
4Y3
23
4Y4
SH00085
74ABT16240A
74ABTH16240A
PIN DESCRIPTION
PIN NUMBER SYMBOL NAME AND FUNCTION
47, 46, 44, 43,
41, 40, 38, 37,
36, 35, 33, 32,
30, 29, 27, 26
2, 3, 5, 6,
8, 9, 11, 12,
13, 14, 16, 17,
19, 20, 22, 23
1, 48, 25, 24
4, 10, 15, 21,
28, 34, 39, 45
7, 18, 31, 42 V
FUNCTION TABLE
Inputs Outputs
nOE nAx nYx
L L H
L H L
H X Z
H = High voltage level
L = Low voltage level
X = Don’t care
Z = High Impedance “off” state
1A0-1A3
2A0-2A3
3A0-3A3
Data inputs
4A0-4A3
1Y0-1Y3
2Y
0-2Y3
3Y0-3Y3
Data outputs
4Y0-4Y3
1OE, 2OE,
3OE, 4OE
Output enables
GND Ground (0V)
CC
Positive supply voltage
PIN CONFIGURA TION
1
1OE
2
1Y0
3
1Y1
4
GND
5
1Y2
6
1Y3
7
V
CC
8
2Y0
9
2Y1
10
GND
11
2Y2
12
2Y3
13
3Y0
14
3Y1
15
GND
16
3Y2
17
3Y4
18
V
CC
19
4Y0
20
4Y1
21
GND
22
4Y2
23
4Y3
24
4OE
48
2OE
47
1A0
46
1A1
45
GND
44
1A2
43
1A3
42
V
CC
41
2A0
40
2A1
39
GND
38
2A2
37
2A3
36
3A0
35
3A1
34
GND
33
3A2
32
3A3
V
31
CC
30
4A0
29
4A1
28
GND
27
4A2
26
4A3
25
3OE
1998 Feb 25
SA00013
3
Page 4
Philips Semiconductors Product specification
I
DC output current
mA
SYMBOL
PARAMETER
UNIT
16-bit inverting buffer/driver (3-State)
74ABT16240A
74ABTH16240A
ABSOLUTE MAXIMUM RATINGS
SYMBOL
V
V
I
V
I
OK
OUT
OUT
T
CC
IK
stg
DC supply voltage -0.5 to +7.0 V
DC input diode current VI < 0 –18 mA
DC input voltage
I
DC output diode current VO < 0 –50 mA
DC output voltage
p
Storage temperature range -65 to +150 °C
NOTES:
1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the
device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability .
2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction
temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150°C.
3. The input and output negative voltage ratings may be exceeded if the input and output clamp current ratings are observed.
PARAMETER CONDITIONS RATING UNIT
3
3
RECOMMENDED OPERATING CONDITIONS
V
CC
V
V
V
I
OH
I
OL
∆t/∆v Input transition rise or fall rate; Outputs enabled 0 10 ns/V
T
amb
DC supply voltage 4.5 5.5 V
Input voltage 0 V
I
High-level input voltage 2.0 V
IH
Input voltage 0.8 V
IL
High-level output current –32 mA
Low-level output current 32 mA
Low-level output current; current duty cycle ≤ 50%; f ≥ 1kHz 64
Operating free-air temperature range –40 +85 °C
1, 2
–1.2 to +7.0 V
Output in Off or High state –0.5 to +5.5 V
Output in Low state 128
Output in High state -64
LIMITS
MIN MAX
CC
V
1998 Feb 25
4
Page 5
Philips Semiconductors Product specification
In ut leakage current
Data ins
B
74ABTH16240A
Quiescent su ly current
16-bit inverting buffer/driver (3-State)
74ABTH16240A
DC ELECTRICAL CHARACTERISTICS
LIMITS
T
SYMBOL P ARAMETER TEST CONDITIONS
Min Typ Max Min Max
V
V
V
Input clamp voltage VCC = 4.5V; IIK = –18mA –0.9 –1.2 –1.2 V
IK
VCC = 4.5V; IOH = –3mA; VI = VIL or V
High-level output voltage
OH
VCC = 5.0V; IOH = –3mA; VI = VIL or V
VCC = 4.5V; IOH = –32mA; VI = VIL or V
Low-level output voltage VCC = 4.5V; IOL = 64mA; VI = VIL or V
OL
I
Input leakage current VCC = 5.5V; VI = GND or 5.5V ±0.01 ±1.0 ±1.0 µA
I
VCC = 5.5V; VI = VCC or GND
I
I
p
74ABTH16240A
VCC = 5.5V; VI = V
CC
VCC = 5.5V; VI = 0
IH
IH
IH
IH
Control
pins
p
VCC = 4.5V; VI = 0.8V 50 50
I
HOLD
us Hold current A inputs
74ABTH16240A
3
VCC = 4.5V; VI = 2.0V –75 –75
VCC = 5.5V; VI = 0 to 5.5V ±500
I
OFF
IPU/I
I
OZH
I
OZL
I
CEX
I
CCH
I
CCL
I
CCZ
∆I
∆I
Power-off leakage current VCC = 0.0V; VO or VI ≤ 4.5V ±5.0 ±100 ±100 µA
Power-up/down 3-State
PD
output current
3-State output High current VCC = 5.5V; VO = 2.7V; VI = VIL or V
3-State output Low current VCC = 5.5V; VO = 0.5V; VI = VIL or V
Output high leakage current VCC = 5.5V; VO = 5.5V; VI = GND or V
I
O
Output current
1
pp
VCC = 2.0V; VO = 0.5V; VI = GND or VCC;
VOE = V
CC
IH
IH
CC
VCC = 5.5V; VO = 2.5V –50 –70 –180 –50 –180 mA
VCC = 5.5V; Outputs High, VI = GND or V
VCC = 5.5V; Outputs Low, VI = GND or V
CC
CC
VCC = 5.5V; Outputs 3-State;
Additional supply current per
CC
input pin2 74ABT16240A
Additional supply current per
CC
input pin2 74ABTH16240A
VI = GND or V
Outputs enabled, one input at 3.4V , other
inputs at VCC or GND; VCC = 5.5V
Outputs enabled, one input at 3.4V , other
inputs at VCC or GND; VCC = 5.5V
CC
NOTES:
1. Not more than one output should be tested at a time, and the duration of the test should not exceed one second.
2. This is the increase in supply current for each input at 3.4V .
3. This is the bus hold overdrive current required to force the input to the opposite logic state.
= +25°C
amb
2.5 2.9 2.5 V
3.0 3.4 3.0 V
2.0 2.4 2.0 V
0.42 0.55 0.55 V
±0.01 ±1 ±1 µA
0.01 1 1 µA
–2 –3 –5 µA
±5.0 ±50 ±50 µA
1.0 10 10 µA
–1.0 –10 –10 µA
1.0 50 50 µA
0.5 1.0 1.0 mA
8 19 19 mA
0.5 1.0 1.0 mA
10 200 200 µA
0.2 1.0 1.0 mA
74ABT16240A
T
= –40°C
amb
to +85°C
UNIT
µA
AC CHARACTERISTICS
GND = 0V; tR = tF = 2.5ns; CL = 50pF; RL = 500Ω; T
SYMBOL PARAMETER WAVEFORM
t
PLH
t
PHL
t
PZH
t
PZL
t
PHZ
t
PLZ
1998 Feb 25
Propagation delay
nAx to nYx
Output enable time
to High and Low level
Output disable time
from High and Low level
= -40°C to +85°C.
amb
1
2
2
LIMITS
T
= +25°C
amb
VCC = +5.0V
T
= –40°C to +85°C
amb
VCC = +5.0V ±0.5V
Min Typ Max Min Max
1.0
1.0
1.2
1.2
1.3
1.3
2.0
1.5
2.4
2.3
2.7
2.5
3.0
3.0
3.3
3.2
4.1
3.6
1.0
1.0
1.2
1.0
1.6
1.4
5
3.7
3.5
4.2
4.2
4.7
4.1
UNIT
ns
ns
ns
Page 6
Philips Semiconductors Product specification
16-bit inverting buffer/driver (3-State)
AC WAVEFORMS
VM = 1.5V, VIN = GND to 2.7V
nAx INPUT
nYx OUTPUT
V
M
t
PHL
V
M
Waveform 1. Input (nAx) to Output (nYx) Propagation Delays
TEST CIRCUIT AND WAVEFORMS
V
M
t
PLH
V
M
SH00091
74ABT16240A
74ABTH16240A
nOE INPUT
0
V
OH
V
OL
nYx OUTPUT
nYx OUTPUT
V
M
t
PZL
V
M
t
PZH
V
M
Waveform 2. 3-State Output Enable and Disable Times
V
M
0V
t
PLZ
t
PHZ
3.5V
VOL + 0.3V
V
OL
V
OH
VOH – 0.3V
0V
SH00092
V
CC
R
PULSE
GENERATOR
V
IN
R
D.U.T.
T
V
OUT
C
L
L
R
L
Test Circuit for 3-State Outputs
SWITCH POSITION
TEST SWITCH
t
t
PLZ
PZL
closed
7V
All other open
DEFINITIONS
RL = Load resistor; see AC CHARACTERISTICS for value.
= Load capacitance includes jig and probe capacitance;
C
L
see AC CHARACTERISTICS for value.
R
= Termination resistance should be equal to Z
T
pulse generators.
OUT
of
t
7.0V
GND
OPEN
90%
NEGATIVE
PULSE
POSITIVE
PULSE
10%
V
M
10% 10%
t
THL
t
TLH
90% 90%
V
M
W
V
M
(tF)
(tR)t
V
t
W
VM = 1.5V
Input Pulse Definition
INPUT PULSE REQUIREMENTS
FAMILY
Amplitude Rep. Rate t
W
74ABT16 3.0V 1MHz 500ns 2.5ns 2.5ns
AMP (V)
90%
0V
(tR)
t
TLH
(tF)
THL
AMP (V)
M
10%
0V
t
t
R
F
SH00093
1998 Feb 25
6
Page 7
Philips Semiconductors Product specification
16-bit inverting buffer/driver (3-State)
74ABT16240A
74ABTH16240A
SSOP48: plastic shrink small outline package; 48 leads; body width 7.5 mm SOT370-1
1998 Feb 25
7
Page 8
Philips Semiconductors Product specification
16-bit inverting buffer/driver (3-State)
74ABT16240A
74ABTH16240A
TSSOP48: plastic thin shrink small outline package; 48 leads; body width 6.1mm SOT362-1
1998 Feb 25
8
Page 9
Philips Semiconductors Product specification
16-bit inverting buffer/driver (3-State)
74ABT16240A
74ABTH16240A
NOTES
1998 Feb 25
9
Page 10
Philips Semiconductors Product specification
16-bit inverting buffer/driver (3-State)
Data sheet status
Data sheet
status
Objective
specification
Preliminary
specification
Product
specification
Product
status
Development
Qualification
Production
Definition
This data sheet contains the design target or goal specifications for product development.
Specification may change in any manner without notice.
This data sheet contains preliminary data, and supplementary data will be published at a later date.
Philips Semiconductors reserves the right to make chages at any time without notice in order to
improve design and supply the best possible product.
This data sheet contains final specifications. Philips Semiconductors reserves the right to make
changes at any time without notice in order to improve design and supply the best possible product.
[1]
74ABT16240A
74ABTH16240A
[1] Please consult the most recently issued datasheet before initiating or completing a design.
Definitions
Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For
detailed information see the relevant data sheet or data handbook.
Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one
or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or
at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended
periods may affect device reliability.
Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips
Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or
modification.
Disclaimers
Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can
reasonably be expected to result in personal injury . Philips Semiconductors customers using or selling these products for use in such applications
do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application.
Right to make changes — Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard
cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no
responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless
otherwise specified.
Philips Semiconductors
811 East Arques Avenue
P.O. Box 3409
Sunnyvale, California 94088–3409
Telephone 800-234-7381
Copyright Philips Electronics North America Corporation 1998
All rights reserved. Printed in U.S.A.
print code Date of release: 05-96
Document order number: 9397-750-03481
yyyy mmm dd
10
Loading...