Datasheet 74ABTH162245ADGG, 74ABTH162245ADL, 74ABT162245ADL, 74ABT162245ADGG Datasheet (Philips)

INTEGRATED CIRCUITS

74ABT162245A
74ABTH162245A

16-Bit bus transceiver with 30Ω series
termination resistors (3-State)

Product specification
Supersedes data of 1996 Nov 20
IC23 Data Handbook




1998 Feb 25

Philips Semiconductors Product specification

Quiescent su ly current

16-bit bus transceiver with 30Ω series
termination resistors (3-State)

FEA TURES

•16-bit bidirectional bus interface

•Power-up 3-State

•Multiple V

•3-State buffers

•Output capability: +12mA/–32mA

•Latch-up protection exceeds 500mA per JEDEC Std 17

•ESD protection exceeds 2000 V per MIL STD 883 Method 3015

and 200V per Machine Model

•Same part as 74ABT16245A-1

•74ABTH162245A incorporates bus hold data inputs which

eliminate the need for external pull-up resistors to hold unused
inputs

•Bus-hold data inputs eliminate the need for external pull-up

resistors to hold unused inputs

QUICK REFERENCE DATA

SYMBOL PARAMETER

and GND pins minimize switching noise

CC

t

PLH

t

PHL

C

C

I

CCZ

I

CCL

IN

I/O

Propagation delay
nAx to nBx or nBx to nAx

Input capacitance VI = 0V or V
I/O pin capacitance VO = 0V or VCC; 3-State 7 pF

pp

CL = 50pF; VCC = 5V

Outputs disabled; VCC = 5.5V 300 nA
Outputs Low; VCC = 5.5V 10 mA

74ABT162245A

74ABTH162245A

DESCRIPTION

The 74ABT162245A high-performance BiCMOS device combines
low static and dynamic power dissipation with high speed.

The 74ABT162245A device is a 16-bit transceiver featuring
non-inverting 3-State bus compatible outputs in both send and
receive directions. The control function implementation minimizes
external timing requirements. The device features two Output
Enable (1OE
(1DIR, 2DIR) inputs for direction control.

The 74ABT162245A is designed with 30 ohm series resistance in
both the upper and lower output structures on both A and B ports.
This design reduces line noise in applications such as memory
address drivers, clock drivers, and bus receiver/transmitters.

The 74ABT162245A is the same as the 74ABT16245A-1. The part
number has been changed to reflect industry standards

Two options are available, 74ABT162245A which does not have the
bus hold feature and the 74ABTH162245A which incorporates the
bus hold feature.

CONDITIONS

T

= 25°C; GND = 0V

amb

CC

, 2OE) inputs for easy cascading and two Direction

TYPICAL UNIT

2.0

3.0
3 pF

ns

ORDERING INFORMATION

PACKAGES TEMPERATURE RANGE OUTSIDE NORTH AMERICA NORTH AMERICA DWG NUMBER

48-Pin Plastic SSOP Type III –40°C to +85°C 74ABT162245A DL BT162245A DL SOT370-1
48-Pin Plastic TSSOP Type II –40°C to +85°C 74ABT162245A DGG BT162245A DGG SOT362-1
48-Pin Plastic SSOP Type III –40°C to +85°C 74ABTH162245A DL BH162245A DL SOT370-1
48-Pin Plastic TSSOP Type II –40°C to +85°C 74ABTH162245A DGG BH162245A DGG SOT362-1

1998 Feb 25 853-1772 19018

2

Philips Semiconductors Product specification

16-bit bus transceiver with 30Ω series
termination resistors (3-State)

PIN CONFIGURATION

1

1DIR

2

1B0

3

1B1

GND

4
5

1B2

6

1B3

7

V

CC

8

1B4
1B5

9

GND

10

1B6

11

1B7

12

2B0

13

2B1

14

GND

15
16

2B2
2B3

17
18

V

CC

2B4

19
20

2B5

21

GND

22

2B6

23

2B7

24

2DIR

PIN DESCRIPTION

SYMBOL PIN NUMBER NAME AND FUNCTION

1DIR, 2DIR 1, 24

47, 46, 44, 43
1A0 – 1A7,
2A0 – 2A7

1B0 – 1B7
2B0 – 2B7

1OE, 2OE 48, 25 Output enables

GND

V

CC

41, 40, 38, 37

36, 35, 33, 32

30, 29, 27, 26

2, 3, 5, 6

8, 9, 11, 12
13, 14, 16, 17
19, 20, 22, 23

4, 10, 15, 21

28, 34, 39, 45

7, 18, 31, 42 Positive supply voltage

48

1OE

47

1A0

46

1A1
GND

45
44

1A2

43

1A3

42

V

CC

41

1A4
1A5

40

GND

39

1A6

38

1A7

37

2A0

36

2A1

35

GND

34
33

2A2
2A3

32
31

V

CC

2A4

30
29

2A5

28

GND

27

2A6

26

2A7

25

2OE

SA00020

Direction control inputs
(Active-High)

Data inputs/outputs (A side)

Data inputs/outputs (B side)

Ground (0V)

74ABT162245A

74ABTH162245A

LOGIC SYMBOL

1

1DIR

48

1OE

47

1A0

46

1A1

44

1A2

43

1A3

41

1A4

40

1A5

38

1A6

37 12

1A7

2

1B0

3

1B1

5

1B2

6

1B3

8

1B4

9

1B5

11

1B6

1B7

FUNCTION TABLE

INPUTS INPUTS/OUTPUTS

nOE nDIR nAx nBx

L L A = B Inputs
L H Inputs B = A

H X Z Z

H = HIGH voltage level
L = LOW voltage level
X = D0n’t care
Z = High impedance “off” state

24

2DIR

36

2A0

35

2A1

33

2A2

32

2A3

30

2A4

29

2A5

27

2A6

26 23

2A7

25

2OE

13

2B0

14

2B1

16

2B2

17

2B3

19

2B4

20

2B5

22

2B6

2B7

SA00021

1998 Feb 25

3

Philips Semiconductors Product specification

16-bit bus transceiver with 30Ω series
termination resistors (3-State)

LOGIC SYMBOL (IEEE/IEC)

48

1

25
24

47

46
44 5

43 6
41 8
40 9
38 11
37 12

36

35
33 16
32 17
30 19
29 20
27 22
26 23

G3
3 EN1 (BA)

3 EN2 (AB)

G6
6 EN4 (BA)

6 EN5 (AB)

∇ 1

∇ 4

2

2 ∇

3

13

5 ∇

14

SA00022

74ABT162245A

74ABTH162245A

SCHEMATIC OF EACH OUTPUT

V

CC

GND

27Ω

OUTPUT

27Ω

SA00042

1998 Feb 25

4

Philips Semiconductors Product specification

I

DC output current

mA

SYMBOL

PARAMETER

UNIT

16-bit bus transceiver with 30Ω series
termination resistors (3-State)

ABSOLUTE MAXIMUM RATINGS

SYMBOL

V

CC

I

IK

V

I

OK

V

OUT

OUT

T

stg

NOTES:

1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the
device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability .

2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction
temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150°C.

3. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.

DC supply voltage –0.5 to +7.0 V
DC input diode current VI < 0 –18 mA
DC input voltage

I

DC output diode current VO < 0 –50 mA
DC output voltage

p

Storage temperature range –65 to 150 °C

PARAMETER CONDITIONS RATING UNIT

3

3

1, 2

output in Off or High state –0.5 to +5.5 V

output in Low state 128

output in High state –64

74ABT162245A

74ABTH162245A

–1.2 to +7.0 V

RECOMMENDED OPERATING CONDITIONS

LIMITS

Min Max

V

CC

V
V
V
I

OH

I

OL

∆t/∆v Input transition rise or fall rate 0 10 ns/V
T

amb

DC supply voltage 4.5 5.5 V
Input voltage 0 V

I

High-level input voltage 2.0 V

IH

Low-level Input voltage 0.8 V

IL

High-level output current –32 mA
Low-level output current 12 mA

Operating free-air temperature range –40 +85 °C

CC

V

1998 Feb 25

5

Philips Semiconductors Product specification

V

Bus hold current
74ABTH162245A

Additional supply current per

16-bit bus transceiver with 30Ω series
termination resistors (3-State)

74ABT162245A

74ABTH162245A

DC ELECTRICAL CHARACTERISTICS

LIMITS

T

= –40°C

SYMBOL PARAMETER TEST CONDITIONS T

amb

= +25°C

Min Typ Max Min Max

V

V

Input clamp voltage VCC = 4.5V; IIK = –18mA –0.9 –1.2 –1.2 V

IK

VCC = 4.5V; IOH = –3mA; VI = VIL or V

High-level output voltage VCC = 5.0V; IOH = –3mA; VI = VIL or V

OH

VCC = 4.5V; IOH = –32mA; VI = VIL or V

Low-level output voltage VCC = 4.5V; IOL = 8mA; VI = VIL or V

OL

Low-level output voltage VCC = 4.5V; IOL = 12mA; VI = VIL or V

I

Input leakage current VCC = 5.5V; VI = GND or 5.5V

I

IH

IH

IH

IH

IH

Control

pins

2.5 2.9 2.5 V

3.0 3.4 3.0 V

2.0 2.4 2.0 V

0.46 0.65 0.65 V

0.50 0.80 0.80 V

±0.01 ±1.0 ±1.0 µA

VCC = 4.5V; VI = 0.8V 50 50

I

HOLD

A and B inputs

4

VCC = 5.5V; VI = 2.0V –75 –75
VCC = 5.5V; VI = 0 to 5.5V ±500

I

IPU/I

IIH+I

IIL+I

I

I
I

I

OFF

CEX

I

O

CCH

CCL

CCZ

Power-off leakage current VCC = 0.0V; VO or V
Power-up/down 3-State

PD

output current
3-State output High current VCC = 5.5V; VO = 5.5V; VI = VIL or V

OZH

3-State output Low current VCC = 5.5V; VO = 0.0V; VI = VIL or V

OZL

3

VCC = 2.0V; VO = 0.5V; VI = GND or V
VOE = Don’t care

Output high leakage current VCC = 5.5V; VO = 5.5V; VI = GND or V
Output current

1

VCC = 5.5V; VO = 2.5V –50 –92 –180 –50 –180 mA
VCC = 5.5V; Outputs High, VI = GND or V

Quiescent supply current VCC = 5.5V; Outputs Low, VI = GND or V

VCC = 5.5V; Outputs 3-State;
VI = GND or V

Outputs enabled, one data input at 3.4V ,
other inputs at VCC or GND; VCC = 5.5V

≤ 4.5V ±5.0 ±100 ±100 µA

I

CC;

IH

IH

CC

CC

CC

CC

±5.0 ±50 ±50 µA

0.5 10 10 µA

–0.5 –10 –10 µA

5.0 50 50 µA

0.3 0.70 0.70 mA
10 19 19 mA

0.3 0.70 0.70 mA

400 700 700 µA

Outputs 3-State, one data input at 3.4V , other
inputs at VCC or GND; VCC = 5.5V

1.0 50 50 µA

74ABT162245A

∆I

CC

input pin

pp

2

p

Outputs 3-State, one data input at 3.4V , other
inputs at VCC or GND; VCC = 5.5V

100 250 250 µA

74ABTH162245A
Control pins, outputs disabled, one enable

input at 3.4V, other inputs at VCC or GND;

400 700 700 µA

VCC = 5.5V

NOTES:

1. Not more than one output should be tested at a time, and the duration of the test should not exceed one second.

2. This is the increase in supply current for each input at 3.4V .

3. This parameter is valid for any VCC between 0V and 2.1V , with a transition time of up to 10msec. From VCC = 2.1V to VCC = 5 ±10% a
transition time of up to 100 µsec is permitted.

4. This is the bus hold overdrive current required to force the input to the opposite logic state.

amb

to +85°C

UNIT

µA

1998 Feb 25

6

Philips Semiconductors Product specification

16-bit bus transceiver with 30Ω series
termination resistors (3-State)

AC CHARACTERISTICS

GND = 0V; tR = tF = 2.5ns; CL = 50pF, RL = 500Ω

SYMBOL PARAMETER WAVEFORM

t

PLH

t

PHL

t

PZH

t

PZL

t

PHZ

t

PLZ

AC WAVEFORMS

VM = 1.5V, VIN = GND to 3.0V

INPUT

OUTPUT

Propagation delay
nAx to nBx or nBx to nAx

Output enable time
to High and Low level

Output disable time
from High and Low level

1.5V

t

PLH

1.5V 1.5V

1.5V

t

PHL

SA00028

Waveform 1. Input to Output Propagation Delays

1

2

2

3 V

0 V

V

V

74ABT162245A

74ABTH162245A

LIMITS

T

= +25°C

amb

VCC = +5.0V

Min Typ Max Min Max

1.0

1.5

1.5

2.0

1.7

1.5

nOE INPUT

OH

OL

OUTPUT

OUTPUT

2.0

3.0

3.1

5.0

3.5

3.2

3.3

4.5

4.3

6.1

4.8

4.5

V

M

t

PZL

t

PZH

T

= –40°C to +85°C

amb

VCC = +5.0V ±0.5V

1.0

1.5

1.5

2.0

1.7

1.5

V

M

V

M

UNIT

3.5

4.9

5.0

7.0

5.4

4.9

V

M

t

PLZ

t

PHZ

ns

ns

ns

3.5V

VOL + 0.3V
V

OL

V

OH

– 0.3V

V

OH

0V

SA00024

1998 Feb 25

Waveform 2. 3-State Output Enable and Disable Times

7

Philips Semiconductors Product specification

16-bit bus transceiver with 30Ω series
termination resistors (3-State)

TEST CIRCUIT AND WAVEFORMS

V

CC

R

OUT

L

R

L

of

PULSE

GENERATOR

V

IN

R

D.U.T.

T

V

OUT

C

L

Test Circuit for 3-State Outputs

SWITCH POSITION

TEST SWITCH

t

PLZ

t

PZL

closed
closed

All other open

DEFINITIONS

RL = Load resistor; see AC CHARACTERISTICS for value.
C

= Load capacitance includes jig and probe capacitance;

L

see AC CHARACTERISTICS for value.

RT = Termination resistance should be equal to Z

pulse generators.

74ABT162245A

74ABTH162245A

t

90%

7.0V
NEGATIVE

PULSE

POSITIVE
PULSE

10%

V

M

10% 10%

t

THL

t

TLH

90% 90%

V

M

Input Pulse Definition

INPUT PULSE REQUIREMENTS

FAMILY

Amplitude Rep. Rate t

74ABT/H16 3.0V 1MHz 500ns 2.5ns 2.5ns

W

(tF)

(tR)t

t

W

90%

V

M

t

TLH

THL

V

M

10%

VM = 1.5V

t

W

R

AMP (V)

0V

(tR)

(tF)

AMP (V)

0V

t

F

SA00018

1998 Feb 25

8

Philips Semiconductors Product specification

16-Bit bus transceiver with 30Ω series termination
resistors (3-State)

SSOP48: plastic shrink small outline package; 48 leads; body width 7.5 mm SOT370-1

74ABT162245A

74ABTH162245A

1998 Feb 25

9

Philips Semiconductors Product specification

16-Bit bus transceiver with 30Ω series termination
resistors (3-State)

TSSOP48: plastic thin shrink small outline package; 48 leads; body width 6.1mm SOT362-1

74ABT162245A

74ABTH162245A

1998 Feb 25

10

Philips Semiconductors Product specification

16-Bit bus transceiver with 30Ω series termination
resistors (3-State)

NOTES

74ABT162245A

74ABTH162245A

1998 Feb 25

11

Philips Semiconductors Product specification

16-Bit bus transceiver with 30Ω series termination
resistors (3-State)

Data sheet status

Data sheet
status

Objective
specification

Preliminary
specification

Product
specification

Product
status

Development

Qualification

Production

Definition

This data sheet contains the design target or goal specifications for product development.
Specification may change in any manner without notice.

This data sheet contains preliminary data, and supplementary data will be published at a later date.
Philips Semiconductors reserves the right to make chages at any time without notice in order to
improve design and supply the best possible product.

This data sheet contains final specifications. Philips Semiconductors reserves the right to make
changes at any time without notice in order to improve design and supply the best possible product.

[1]

74ABT162245A

74ABTH162245A

[1] Please consult the most recently issued datasheet before initiating or completing a design.

Definitions

Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For

detailed information see the relevant data sheet or data handbook.
Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one

or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or
at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended
periods may affect device reliability.

Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips
Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or
modification.

Disclaimers

Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can

reasonably be expected to result in personal injury . Philips Semiconductors customers using or selling these products for use in such applications
do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application.

Right to make changes — Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard
cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no
responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless
otherwise specified.

Philips Semiconductors
811 East Arques Avenue
P.O. Box 3409
Sunnyvale, California 94088–3409
Telephone [phone]

 Copyright Philips Electronics North America Corporation 1998

All rights reserved. Printed in U.S.A.

print code Date of release: 05-96
Document order number: 9397-750-03487




yyyy mmm dd

12