Datalogic PBT9300 Series, PBT9300-AR Series, PBT9300-D Series, PBT9300-DKAR Series, PBT9300-DAR Series Quick Reference Manual

PowerScan™ BT9300 Family

Industrial Cordless Handheld

Laser Bar Code Reader

Quick Reference Guide

Datalogic ADC S.r.l.

Via S. Vitalino, 13
40012 Lippo, Calderara di Reno (BO) - Italy
Tel. [phone]
Fax [phone]

©2013-2016 Datalogic ADC S.r.l.

An Unpublished Work - All rights reserved. No part of the con­tents of this documentation or the procedures described
therein may be reproduced or transmitted in any form or by
any means without prior written permission of Datalogic ADC
S.r.l. or its subsidiaries or affiliates ("Datalogic" or “Datalogic
ADC”). Owners of Datalogic products are hereby granted a
non-exclusive, revocable license to reproduce and transmit
this documentation for the purchaser's own internal business
purposes. Purchaser shall not remove or alter any proprietary
notices, including copyright notices, contained in this docu­mentation and shall ensure that all notices appear on any
reproductions of the documentation.
Should future revisions of this manual be published, you can
acquire printed versions by contacting your Datalogic repre­sentative. Electronic versions may either be downloadable
from the Datalogic website (www.datalogic.com) or provided
on appropriate media. If you visit our website and would like
to make comments or suggestions about this or other Data­logic publications, please let us know via the "Contact Data­logic" page.

DISCLAIMER

Datalogic has taken reasonable measures to provide informa­tion in this manual that is complete and accurate, however,
Datalogic reserves the right to change any specification at any
time without prior notice.
Datalogic and the Datalogic logo are registered trademarks of
Datalogic S.p.A. in many countries, including the U.S.A. and
the E.U. PowerScan is a registered trademark of Datalogic
S.p.A. or of Datalogic Group companies, registered in many
countries, including the U.S. and the E.U. All other brand and
product names may be trademarks of their respective own­ers.

PATENTS

See www.patents.datalogic.com

for patent list.

See the Regulatory Addendum included
with your product for additional regulatory,
safety and legal information.

Quick Reference Guide i

Table of Contents

END USER SOFTWARE LICENSE AGREEMENT (EULA) iii

Software Product Policy .............................................................. viii

Customers Under Software Support ................................. viii

Description ....................................................................................... 1

General Features .................................................................... 1

Using the PowerScan™ PBT9300 ...................................................2

Scan Line Position ........................................................ 2

Reading Angle ............................................................... 3

Installing the Battery Pack ............................................................ 4

Charging the Batteries .......................................................... 7

Changing the Batteries ................................................ 7

Programming ................................................................................... 8

Using Programming Bar Codes ............................................8

Configure Other Settings ....................................................... 8

Resetting Product Defaults ..................................................9

Set Date and Time .......................................................................... 9

Linking the Reader ........................................................................10

Link Datalogic RF Devices to Base............................ 10

Linking to a Bluetooth Adapter in Serial Port Profile

(Slave) Mode ................................................................ 10

Linking to a Bluetooth Adapter in HID mode........... 11

Variable PIN Code ....................................................... 12

HID Country Mode .........................................................................13

HID Caps Lock State ......................................................................17

HID Alt Mode ..................................................................................18

Power Off .......................................................................................18

Operating Mode ............................................................................. 19

Scan Mode ............................................................................19

Multiple Label Reading ........................................................20

Technical Specifications ...............................................................21

LED and Beeper Indications .........................................................24

Cleaning ..........................................................................................27

Datalogic ADC Limited Factory Warranty ...................................28

Ergonomic Recommendations ....................................................30

Services and Support ....................................................................31

Hex-Numeric Keypad ....................................................................32

For HID Variable Pin Code only.................................. 35

ii PowerScan™ PBT9300

Quick Reference Guide iii

DATALOGIC IP TECH S.R.L.

END USER SOFTWARE LICENSE AGREEMENT (EULA)

FOR THE POWERSCAN™ 9300

Notice to End User: There are two types of software covered by this
END USER LICENSE AGREEMENT ("EULA"): (1) The Datalogic Product
you have acquired contains embedded software ("Embedded Soft­ware") which is integral to the Product's operation; and (2) Optional
Application Software provided to you on an optional basis ("Applica­tion Software"). Embedded Software and Application Software are col­lectively referred to as "Software" and are subject to the terms and
conditions contained in this EULA. Software is provided only for use
with, and for authorized end users of, the Datalogic PowerScan™ 93XX
("Product"). Portions of the Embedded Software include or operate
with Open Source software or libraries ("Open Source"). Use of Open
Source is subject to the Open Source licenses entitled "Power-
Scan_93XX.zip" available at the following website: http://www.data-

logic.com/software_lan_sb2783_1.html.

This EULA (End User Software License Agreement) ("EULA” or "Agree­ment") is a legally binding agreement governing the licensing of the
Software and Documentation by Datalogic IP Tech S.r.l. and its subsid­iaries and affiliates ("Datalogic") to the entity or person who has pur­chased or otherwise acquired a Datalogic Product ("End User"). For
purposes of this Agreement, any software that is not Embedded Soft­ware or Application Software is software associated with a separate
end-user license agreement is licensed to you under the terms of that
license agreement. Datalogic and End User hereby agree as follows:

1. Definitions

1.1 "Affiliate" means a business entity currently existing or later
acquired that is controlled by, or is under common control with
Datalogic S.p.A.

1.2 "Documentation" means materials such as user's guides, program
reference guides, quick reference guides, manuals, or similar mate­rials associated with or related to the Datalogic Product, whether in
printed, "online", or other form.

1.3 "Proprietary Information" means: (a) source code, object code, soft­ware, documentation, and any related internal design, system
design, data base design, algorithms, technology, technical data or
information, implementation techniques, and trade secrets related
to the Software, (b) any other trade secrets marked appropriately
or identified as proprietary or confidential, and (c) any information
that End User, under the circumstances, should recognize as confi­dential. Proprietary Information does not include any information
that the receiving party can establish was (1) in the public domain,
(2) already in the receiving party's possession or rightfully known
prior to receipt, (3) rightfully learned from a third party not in viola­tion of any other's proprietary rights, or (4) independently devel­oped without access to Proprietary Information.

1.4 "Datalogic Product" means the Datalogic Powerscan™ series scan­ner product, including all embedded Software in and all Documen­tation related to such product, which has been purchased or
otherwise acquired by End User, whether obtained directly or indi­rectly from Datalogic.

1.5 "Software" means any software or computer programs of Datalogic
or its third party licensors in machine readable form which is
embedded in the Datalogic Product, whether obtained directly or
indirectly from Datalogic, including any replacement, update,
upgrade, enhancement or modification.

2. Scope Of License Granted

2.1 Datalogic grants to End User a non-exclusive, non-transferable,
perpetual license to use the Software, solely on the Datalogic Prod-

iv PowerScan™ PBT9300

uct in which it is embedded ("designated Datalogic Product"), in
machine-readable form only, solely for End User's internal busi­ness purposes. This Agreement does not convey ownership of the
Software to End User. Title to the Software shall be and remain
with Datalogic or the third party from whom Datalogic has
obtained a licensed right. As used in this Agreement, the term
"purchase" or its equivalents when applied to the Software shall
mean "acquire under license." End User is not entitled to receipt or
use of the source code to any Software.

2.2 End User shall not copy, modify, decompile, disassemble, reverse
engineer, or otherwise reproduce or remanufacture the Software,
whether modified or unmodified, nor sell, assign, sublicense, dis­tribute, lend, rent, give, or otherwise transfer the Software to any
other person or organization, for purposes other than as expressly
provided in this Agreement, without Datalogic's prior written con­sent.

3. Transfers, Support

3.1 Any copying, installing, reproduction, remanufacture, reverse engi­neering, electronic transfer, or other use of the Software on other
than the designated Datalogic Product will be a material breach of
this Agreement. However, Datalogic may elect not to terminate
this Agreement or the granted licenses, but instead may elect to
notify End User that End User is deemed to have ordered and
accepted a license for each breaching use. End User shall pay Data­logic the applicable list price for such licenses as of the date of such
breach.

3.2 End User shall not sell, assign, sublicense, distribute, lend, rent,
give, or otherwise transfer the Datalogic Product to any third party
unless such third party agrees with Datalogic in writing to be
bound by the terms and conditions of this Agreement. Any such
transfer of the Datalogic Product absent such agreement shall be
null and void.

3.3 End User may obtain support for Software from Datalogic at Data­logic's standard support fees and under Datalogic's standard sup­port terms and conditions in effect at the time the support is
requested.

4. Intellectual Property

End User acknowledges that the Software comprises valuable trade
secrets of Datalogic or Datalogic's third party licensors and that the
Software is protected by United States copyright law and trade secret
law, and by all applicable international intellectual property laws and
treaty provisions . The license set forth in this Agreement does not
transfer to End User any ownership of Datalogic's or its third party
licensors' copyrights, patents, trademarks, service marks, trade secrets,
or other intellectual property rights and End User shall have no right to
commence any legal actions to obtain such rights. End User shall not
remove, modify, or take any other action that would obscure any copy­right, trademark, patent marking, or other intellectual property notices
contained in or on the Datalogic Product.

5. Proprietary Information

5.1 End User acknowledges that Proprietary Information is the confi­dential, proprietary, and trade secret property of Datalogic and Dat­alogic's third party licensors and End User acquires no right or
interest in any Proprietary Information.

5.2 End User shall not disclose, provide, or otherwise make available
the Proprietary Information of Datalogic or its third party licensors
to any person other than End User's authorized employees or
agents who are under confidentiality agreement, and End User
shall not use the Proprietary Information other than in conjunction
with use of the Datalogic Product exclusively for End User's internal
business purposes. End User shall take steps to protect the Propri-

Quick Reference Guide v

etary Information no less securely than if it were End User's own
intellectual property.

5.3 The provisions of this Proprietary Information Section shall survive
and continue for five (5) years after the termination of this Agree­ment.

6. Limited Warranty

6.1 Datalogic warrants that, under normal use and operation, the Dat­alogic Product will conform substantially to the applicable Docu­mentation for the period specified in the Documentation. During
this period, for all reproducible nonconformities for which Datalogic
has been given written notice, Datalogic will use commercially rea­sonable efforts to remedy nonconformities verified by Datalogic.
End User agrees to supply Datalogic with all reasonably requested
information and assistance necessary to help Datalogic in remedy­ing such nonconformities. For all defects reported to Datalogic
within the warranty period, Datalogic's liability is limited to provid­ing End User with one copy of corrections or responding to End
User's problem reports according to Datalogic's standard assis­tance practices. Datalogic does not warrant that the product will
meet End User's requirements or that use of the product will be
uninterrupted or error free, or that Datalogic's remedial efforts will
correct any nonconformance. This limited warranty does not cover
any product that have been subjected to damage or abuse,
whether intentionally, accidentally, or by neglect, or to unautho­rized repair or unauthorized installation, and shall be void if End
User modifies the product, uses the product in any manner other
than as established in the Documentation, or if End User breaches
any of the provisions of this Agreement.

6.2 EXCEPT AS PROVIDED IN THIS AGREEMENT, THE DATALOGIC
PRODUCT IS PROVIDED "AS IS" AND DATALOGIC MAKES NO WAR­RANTIES OF ANY KIND, EXPRESS OR IMPLIED, WRITTEN OR ORAL,
WITH RESPECT TO THE PRODUCT, AND SPECIFICALLY DISCLAIMS
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE.

7. Infringement

7.1 Datalogic will defend End User against any claim in a lawsuit that
the Datalogic Product furnished hereunder directly infringe a
United States patent or copyright of a third party and Datalogic will
pay any damages finally awarded against End User by a court of
competent jurisdiction that are attributable to such claim or will
pay End User's part of any settlement that is attributable to such
claim, provided, that 1) End User notifies Datalogic promptly in
writing of the claim, 2) Datalogic controls the defense or settlement
of the claim, and 3) End User cooperates fully with Datalogic in
such defense or settlement. All notices of a claim should be sent to
Datalogic IP Tech S.r.l., Legal & IP Department, Via San Vitalino 13,
40012 Calderara di Reno (Bologna), Italy.

7.2 In the defense or settlement of any such claim, Datalogic may, at
its option, 1) procure for End User the right to continue using the
Datalogic Product, 2) modify the Datalogic Product so that it
becomes non-infringing, 3) replace the Datalogic Product with an
equivalent product not subject to such claim, or 4) provide End User
an opportunity to return the Datalogic Product and receive a refund
of the purchase price paid, less a reasonable allowance for use.

7.3 Datalogic shall have no liability to End User for claims of infringe­ment based upon 1) the use of any Datalogic Product in combina­tion with any product which Datalogic has not either furnished or
authorized for use with such Datalogic Product 2) the use of any
Datalogic Product designed, manufactured, or modified to the
specifications of End User, or 3) End User's modification of the Dat­alogic Product without written authorization from Datalogic.

7.4 THE FOREGOING STATES DATALOGIC'S COMPLETE AND ENTIRE

vi PowerScan™ PBT9300

OBLIGATION CONCERNING CLAIMS OF PATENT, COPYRIGHT, OR
OTHER INTELLECTUAL PROPERTY INFRINGEMENT, CANCELS AND
SUPERCEDES ANY PRIOR AGREEMENTS, WHETHER ORAL OR
WRITTEN, BETWEEN THE PARTIES CONCERNING SUCH CLAIMS,
AND WILL NOT BE MODIFIED OR AMENDED BY ANY PAST, CON­TEMPORANEOUS, OR FUTURE AGREEMENTS OR DEALINGS
BETWEEN THE PARTIES, WHETHER ORAL OR WRITTEN, EXCEPT AS
SET FORTH IN A FUTURE WRITING SIGNED BY BOTH PARTIES.

8. Limitation Of Liability

EXCEPT AS PROVIDED IN SECTION 7, DATALOGIC SHALL NOT BE LIABLE
FOR ANY CLAIMS AGAINST END USER BY ANY OTHER PARTY. IN NO
EVENT SHALL DATALOGIC'S LIABILITY FOR DAMAGES, IF ANY,
WHETHER BASED UPON CONTRACT, TORT (INCLUDING NEGLIGENCE),
PRODUCT LIABILITY, STRICT LIABILITY, WARRANTY, OR ANY OTHER
BASIS, EXCEED THE PRICE OR FEE PAID BY END USER FOR THE DATA­LOGIC PRODUCT. UNDER NO CIRCUMSTANCES SHALL DATALOGIC BE
LIABLE TO END USER OR ANY THIRD PARTY FOR LOST PROFITS, LOST
DATA, INTERRUPTION OF BUSINESS OR SERVICE, OR FOR ANY OTHER
SPECIAL, CONSEQUENTIAL, CONTINGENT, INDIRECT, INCIDENTAL,
PUNITIVE, EXEMPLARY, OR OTHER SIMILAR DAMAGES, EVEN IF DATA­LOGIC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

9. Government Restricted Rights; International Use

9.1 Use, duplication, or disclosure of the Software by the U.S. Govern­ment is subject to the restrictions for computer software devel­oped at private expense as set forth in the U.S. Federal Acquisition
Regulations at FAR 52.227-14(g), or 52.227-19 or in the Rights in
Technical Data and Computer Software clause at DFARS 252.227­7013(c)(1)(ii), whichever is applicable.

9.2 If End User is using the Datalogic Product outside of the United
States, End User must comply with the applicable local laws of the
country in which the Datalogic Product is used, with U.S. export
control laws, and with the English language version of this Agree­ment. The provisions of the "United Nations Convention on Inter­national Sale of Goods" shall not apply to this Agreement.

10. Termination

10.1Either party may terminate this Agreement or any license granted
under this Agreement at any time upon written notice if the other
party breaches any provision of this Agreement.

10.2Upon termination of this Agreement, End User immediately shall
cease using any nonembedded software and shall return to Data­logic or destroy all non-embedded software covered by this Agree­ment, and shall furnish Datalogic with a certificate of compliance
with this provision signed by an officer or authorized representa­tive of End User. For embedded software, End User agrees to sign a
waiver prepared by Datalogic concerning further use of the embed­ded Software. End User's resumed or continued use of the embed­ded Software after termination shall constitute End User's
agreement to be bound by the terms and conditions of this Agree­ment for such use.

11. General Provisions

11.1 Entire Agreement; Amendment. This document contains the
entire agreement between the parties relating to the licensing of
the Software and supersedes all prior or contemporaneous agree­ments, written or oral, between the parties concerning the licens­ing of the Software. This Agreement may not be changed,
amended, or modified except by written document signed by Data­logic.

11.2 Notice. All notices required or authorized under this Agreement
shall be given in writing, and shall be effective when received,
with evidence of receipt. Notices to Datalogic shall be sent to the

Quick Reference Guide vii

attention of Datalogic IP Tech S.r.l., Legal & IP Department, Via San
Vitalino 13, 40012 Calderara di Reno (Bologna), Italy or such other
address as may be specified by Datalogic in writing.

11.3 Waiver. A party's failure to enforce any of the terms and condi­tions of this Agreement shall not prevent the party's later enforce­ment of such terms and conditions.

11.4 Governing Law; Venue: Both parties agree to the application of the
laws of the country in which End User obtained the license to gov­ern, interpret, and enforce all of End User’s and Datalogic’s respec­tive rights, duties, and obligations arising from, or relating in any
manner to, the subject matter of this Agreement, without regard to
conflict of law principles. The United Nations Convention on Con­tracts for the International Sale of Goods does not apply.

All rights, duties, and obligations are subject to the courts of the
country in which End User obtained the license. For licenses
granted by Licensee who operates in the countries specified below,
the following terms applies.

For Americas.
This Agreement is governed by the laws of the State of Oregon.

This Agreement and the rights of the parties hereunder shall be
governed by and construed in accordance with the laws of the
State of Oregon U.S.A, without regard to the rules governing con­flicts of law. The state or federal courts of the State of Oregon
located in either Multnomah or Lane counties shall have exclusive
jurisdiction over all matters regarding this Agreement, except that
Datalogic shall have the right, at its absolute discretion, to initiate
proceedings in the courts of any other state, country, or territory in
which End User resides, or in which any of End User's assets are
located. In the event an action is brought to enforce the terms and
conditions of this Agreement, the prevailing party shall be entitled
to reasonable attorneys’ fees, both at trial and on appeal.

For Europe, Middle East and Africa
This Agreement is governed by the laws of Italy. This Agreement

and the rights of the parties hereunder shall be governed by and
construed in accordance with the laws of Italy, without regard to
the rules governing conflicts of law. Italian Court of Bologna shall
have exclusive jurisdiction over all matters regarding this Agree­ment, except that Datalogic shall have the right, at its absolute dis­cretion, to initiate proceedings in the courts of any other state,
country, or territory in which End User resides, or in which any of
End User's assets are located. In the event an action is brought to
enforce the terms and conditions of this Agreement, the prevailing
party shall be entitled to reasonable attorneys’ fees, both at trial
and on appeal.

For Asia- Pacific Countries

This Agreement is governed by the laws of the State of Hong Kong.
This Agreement and the rights of the parties hereunder shall be
governed by and construed in accordance with the laws of the
State of Hong Kong without regard to the rules governing conflicts
of law. The Court of Hong Kong shall have exclusive jurisdiction
over all matters regarding this Agreement, except that Datalogic
shall have the right, at its absolute discretion, to initiate proceed­ings in the courts of any other state, country, or territory in which
End User resides, or in which any of End User's assets are located.
In the event an action is brought to enforce the terms and condi­tions of this Agreement, the prevailing party shall be entitled to
reasonable attorneys’ fees, both at trial and on appeal.

11.5 Attorneys' Fees. In the event an action is brought to enforce the
terms and conditions of this Agreement, the prevailing party shall
be entitled to reasonable attorneys' fees, both at trial and on
appeal.

- END -

Software Product Policy

viii PowerScan™ PBT9300

Software Product Policy

Datalogic reserves the right to ship its products with the lat­est version of software/firmware available. This provides our
customers with the very latest in Datalogic software technol­ogy.

The only exception to this policy is when the buyer has a
signed contract with Datalogic that clearly defines the terms
and conditions for making software/firmware changes in
products shipped to the buyer.

Customers Under Software Support

To arrange for a Software Maintenance and Support Agree­ment please contact your Datalogic sales person.

Quick Reference Guide 1

PowerScan™ PBT9300

Description

The PowerScan™ PBT9300 reader is a feature-rich and
rugged laser reader. It is offered in several different mod­els to better fit the different needs of each customer.

The table below shows the unique features of each model:

General Features

Model P/N Optical feature

PBT9300-XX Standard optic, standard and high density codes

PBT9300-ARXX

Autorange optic, standard and low density codes,
long depth of field

PBT9300-DXX

Standard optic, standard and high density codes,
display and 4 keys keypad

PBT9300-DARXX

Autorange optic, standard and low density codes,
long depth of field, display and 4 keys keypad

PBT9300-DKXX

Standard optic, standard and high density codes,
display and 16 keys keypad

PBT9300-DKARXX

Autorange optic, standard and low density codes,
long depth of field, display and 16 keys keypad

Operating

To read a symbol or capture an image, you simply
aim the reader by a partial trigger press and pull the
trigger.

Decoding

Thanks to powerful algorithms, PowerScan™ PBT9300
reader reliably decodes all major 1D (linear) barcodes.
The data stream — acquired from decoding a symbol
— is rapidly sent to the host. The reader is immedi­ately available to read another symbol.

Formatting and
Concatenating

The string of a decoded code may be processed
according to either a simple or advanced data for­matting and be concatenated.

Autoscanning

An autoscan command causes the reader to scan
continuously.

Flash Memory
PBT9300

Flash technology allows you to upgrade the Power­Scan™ PBT9300 reader as new symbologies are sup­ported or as new features become available.

Using the PowerScan™ PBT9300

2PowerScan™ PBT9300

Using the PowerScan™ PBT9300

The PowerScan™ PBT9300 reader normally functions by
capturing and decoding bar codes. The reader is equipped
with an aiming system which helps to aim the target.

Table 1. Aiming System

PowerScan™ PBT9300 provides an aiming system. If
enabled, a partial trigger press produces a red spot, which
should be aimed over the code center to get the best
reading performance, see figure (1) above. By completely
pressing the trigger the scan line appears to start the
code scanning (2).

Scan Line Position

Code scanning is performed along the scan line emitted
from the reading window. This line must cross the entire
code. The best reading angles are indicated in the figure
below:

Using the PowerScan™ PBT9300

Quick Reference Guide 3

Reading Angle

Successful scanning is obtained by tilting the reader with
respect to the barcode to avoid direct reflections that
impair the reading performance, see the figure below.

Symbologies with smaller bars or elements (mil size)
should be read closer to the unit. Symbologies with larger
bars or elements (mil size) should be read farther from the
unit.

If the entire bar code is within the scan line, you will get a
good read. Successful reading is signaled by an audible
tone plus a good-read green spot LED indicator.

Reference the PowerScan 9300 Product Reference Guide
(PRG) for more information about this feature and other
programmable settings.

Installing the Battery Pack

4PowerScan™ PBT9300

Installing the Battery Pack

To install, charge and/or do any other action on the bat­tery, follow the instructions in this manual.

NOTE

To charge the Battery Pack, See “Charging
the Batteries” on page 7.

Datalogic recommends annual replacement
of rechargeable battery packs to ensure
maximum performance.

WARNING

Do not discharge the battery using any
device except for the scanner. When the bat­tery is used in devices other than the desig­nated product, it may damage the battery or
reduce its life expectancy. If the device
causes an abnormal current to flow, it may
cause the battery to become hot, explode or
ignite and cause serious injury.
Lithium-ion battery packs may get hot,
explode or ignite and cause serious injury if
exposed to abusive conditions. Be sure to
follow the safety warnings that follow:

• Do not place the battery pack in fire or heat.

• Do not connect the positive terminal and
negative terminal of the battery pack to each
other with any metal object (such as wire).

• Do not carry or store the battery pack
together with metal objects.

WARNING

• Do not pierce the battery pack with nails,
strike it with a hammer, step on it or other­wise subject it to strong impacts or shocks.

• Do not solder directly onto the battery pack.

• Do not expose the battery pack to liquids, or
allow the battery to get wet.

• Do not apply voltages to the battery pack
contacts.

In the event the battery pack leaks and the
fluid gets into your eye, do not rub the eye.
Rinse well with water and immediately seek
medical care. If left untreated, the battery
fluid could cause damage to the eye.

Installing the Battery Pack

Quick Reference Guide 5

CAUTION

Always charge the battery at 32° – 113°F (0°

- 45°C) temperature range.
Use only the authorized power supplies, bat-

tery pack, chargers, and docks supplied by
your Datalogic reseller. The use of any other
power supplies can damage the device and
void your warranty.

Do not disassemble or modify the battery.
The battery contains safety and protection
devices, which, if damaged, may cause the
battery to generate heat, explode or ignite.

Do not place the battery in or near fire, on
stoves or other high temperature locations.

Do not place the battery in direct sunlight, or
use or store the battery inside cars in hot
weather. Doing so may cause the battery to
generate heat, explode or ignite. Using the
battery in this manner may also result in a
loss of performance and a shortened life
expectancy.

Do not place the battery in microwave ovens,
high-pressure containers or on induction
cookware.

Immediately discontinue use of the battery
if, while using, charging or storing the bat­tery, the battery emits an unusual smell,
feels hot, changes color or shape, or appears
abnormal in any other way.

CAUTION

Do not replace the battery pack when the
device is turned on.

Do not remove or damage the battery pack’s
label.

Do not use the battery pack if it is damaged
in any part. Battery pack usage by children
should be supervised.

Installing the Battery Pack

6PowerScan™ PBT9300

As with other types of batteries, Lithium-Ion (LI) batteries
will lose capacity over time. Capacity deterioration is
noticeable after one year of service whether the battery is
in use or not. It is difficult to precisely predict the finite life
of a LI battery, but cell manufacturers rate them at 500
charge cycles. In other words, the batteries should be
expected to take 500 full discharge / charge cycles before
needing replacement. This number is higher if partial dis­charging / recharging is adhered to rather than full / deep
discharging.

The typical manufacturer advertised useful life of LI bat­teries is one to three years, depending on usage and num­ber of charges, etc., after which they should be removed
from service, especially in mission critical applications. Do
not continue to use a battery that is showing excessive
loss of capacity, it should be properly recycled / disposed
of and replaced. For most applications, batteries should
be replaced after one year of service to maintain customer
satisfaction and minimize safety concerns.

Collect and recycle waste batteries separately from the
device in comply with European Directive 2006/66/EC,
2011/65/EU, 2002/96/EC and 2012/19/EU an

d subse-

quent modifications, US and China regulatory and others
laws and regulations about the environment.

Installing the Battery Pack

Quick Reference Guide 7

Charging the Batteries

Once the BC 90x0-BT is powered, you can charge the
reader's batteries. Place the PowerScan

™

BT9300 into the
BC 90x0-BT cradle. The Reader LED on the cradle/battery
charger turns red.

The battery is completely charged when the Reader LED
on the cradle/battery charger turns green.

The battery can also be charged in the spare battery slot
(BC91xx models only) or using the Multi Battery Charger
accessory.

Changing the Batteries

1. Push the button at the bottom of the handle as
shown to release the battery.

2. Pull down to remove the battery.

Button

1

2

Programming

8PowerScan™ PBT9300

Programming

The reader is factory-configured with a set of standard
default features. Customize your reader through use of
the programming bar codes available in the PowerScan
PBT9300. Check the corresponding features section for
your interface, and also the Data Editing and Symbologies
chapters of the PRG.

Using Programming Bar Codes

This manual contains bar codes which allow you to recon­figure your reader. Some programming bar code labels,
like the "Reset Default Settings" on page 9, require only
the scan of that single label to enact the change.

Other bar codes require the reader to be placed in Pro­gramming Mode prior to scanning them. Scan an ENTER/
EXIT bar code once to enter Programming Mode; scan the
desired parameter settings; scan the ENTER/EXIT bar
code again to accept your changes, which exits Program­ming Mode and returns the reader to normal operation.

Configure Other Settings

Additional programming bar codes are available in the
PRG to allow for customizing programming features. If
your installation requires different programming than the
standard factory default settings, refer to the PRG.

Do not incinerate, disassemble, short ter­minals or expose to high temperature. Risk
of fire, explosion. Use specified charger
only. Risk of explosion if the battery is
replaced by an incorrect type. Dispose of
the batteries as required by the relevant
laws in force.

WARNING

Set Date and Time

Quick Reference Guide 9

Resetting Product Defaults

If you aren’t sure what programming options are in your
reader, or you’ve changed some options and want your
custom factory settings restored, scan the bar code below
to reset the reader to initial configuration. See the PRG for
other options, and a listing of standard factory settings.

Reset Default Settings

Set Date and Time

1. Scan the Enter/Exit Programming barcode below to
set date and time.

ENTER/EXIT PROGRAMMING MODE

2. Scan the Set Date barcode + six digits for Year, Month

and Day (YYMMDD) from the

Hex-Numeric Keypad on

page 32

.

Set Date

3. Scan Set Time + six digits for Hours, Minutes and Seconds

(HHMMSS) from the

Hex-Numeric Keypad on page 32

.

Set Time

4. Scan the Enter/Exit Programming barcode to com-

plete.

NOTE

Factory defaults are based on the interface
type. Be sure your reader is configured for the
correct interface before scanning this label.

Linking the Reader

10 PowerScan™ PBT9300

Linking the Reader

Link Datalogic RF Devices to Base

For RF devices, before configuring the interface it is nec­essary to link the handheld with the base.

To link the handheld and the base, press the trigger to
wake up the handheld and mount it into the base. If the
reader was previously linked to another base, you must
first press and hold the button on the base (>5 seconds),
then scan the

Unlink

bar code before re-linking to the new

base.

Linking to a Bluetooth Adapter in Serial Port
Profile (Slave) Mode

1. Install any drivers provided with the Bluetooth
adapter.

2. Scan the

Enable RF Link to Server

label below to

make the scanner visible to the host computer.

3. Use the host computer’s Bluetooth manager to
“Discover new devices” and select "Datalogic
Scanner." If you receive an error message, it may
be necessary to disable security on the device.

4. Use an RS-232 terminal program to see incom­ing data on the port designated by the com­puter's Bluetooth manager.

Unlink

Enable RF Link to Server

Linking the Reader

Quick Reference Guide 11

Linking to a Bluetooth Adapter in HID mode

1. Install any drivers provided with the Bluetooth
adapter.

2. Scan the

Link to PC in HID

label below..

3. Use the host computer’s Bluetooth manager to
“Discover new devices” and select "Datalogic
Scanner." If you receive an error message, it may
be necessary to disable security on the device.

4. Use a text editor to see incoming data on the
port designated by the computer's Bluetooth
manager.

NOTE

The Powerscan BT9300 can be set up to require
a PIN code when connecting. If you want to set
up a PIN, or when adding new equipment to a
system that uses a custom security PIN, please
see the PRG for information.

Link to PC in HID

Linking the Reader

12 PowerScan™ PBT9300

Variable PIN Code

Some Bluetooth drivers on the Host (such as WIDCOMM
and BlueSoleil 8) require a Variable PIN Code. When
attempting connection, the application presents a window
that includes a PIN Code which is to be input using the
PowerScan BT9300. Please read the bar code "Variable
PIN Code" and restart the sequence from step 2 above.

Variable PIN Code

When you hear the beep and see the Green LED blinking
indicating the reader is waiting for an alphanumeric entry,
enter the required variable PIN Code by scanning the cor­responding bar codes in the “Hex-Numeric Keypad” sec-
tion at the back of this manual for alphanumeric entry.
Finish by scanning the

Exit HID Variable PIN Code

label.

Exit HID Variable PIN Code

HID Country Mode

Quick Reference Guide 13

HID Country Mode

When the Reader is connected with a Bluetooth Adapter
in HID mode, you may want to set the country for which
your PC is localized. In order to do that, read one of the
configuration command labels below.

HID COUNTRY MODE

ENTER/EXIT PROGRAMMING MODE

Country Mode = U.S.

Country Mode = Belgium

Country Mode = Britain

Country Mode = Croatia

HID Country Mode

14 PowerScan™ PBT9300

HID COUNTRY MODE (continued)

Country Mode = Czech Republic

Country Mode = Denmark

Country Mode = France

Country Mode = French Canadian

Country Mode = Germany

Country Mode = Hungary

HID Country Mode

Quick Reference Guide 15

HID COUNTRY MODE (continued)

Country Mode = Italy

Country Mode = Japanese 106-key

Country Mode = Lithuanian

Country Mode = Norway

Country Mode = Poland

Country Mode = Portugal

HID Country Mode

16 PowerScan™ PBT9300

HID COUNTRY MODE (continued)

Country Mode = Romania

Country Mode = Spain

Country Mode = Sweden

Country Mode = Slovakia

Country Mode = Switzerland

HID Caps Lock State

Quick Reference Guide 17

HID Caps Lock State

This option specifies the format in which the reader sends
character data.

ENTER/EXIT PROGRAMMING MODE



Caps Lock State = Caps Lock OFF

Caps Lock State = Caps Lock ON

Caps Lock State = AUTO Caps Lock Enable

HID Alt Mode

18 PowerScan™ PBT9300

HID Alt Mode

Read the configuration command label below for the HID
Alt Mode feature.

Power Off

Scan the bar code below to shut off power to the BT hand­held until the next trigger pull.

PowerOff

ENTER/EXIT PROGRAMMING MODE



HID Alt Mode = OFF

HID Alt Mode = ON

Operating Mode

Quick Reference Guide 19

Operating Mode

Scan Mode

The reader can be set to operate in one of several scan­ning modes. See the PRG for more information and set­tings for any of the options:

Trigger Single (Default) —

When the trigger is partially
pulled, the aiming is turned on. The scanner is activated
when the trigger is completely pulled. Scanning is acti­vated until one of the following occurs:

• a programmable duration

1

has elapsed

• a label has been read

• the trigger is released

Trigger Hold Multiple —

When the trigger is pulled, scan­ning starts and the product scans until the trigger is
released or “maximum scan on time”

1

has elapsed. Read­ing a label does not disable scanning. Double Read Time­out

1

prevents undesired multiple reads in this mode.

Trigger Pulse Multiple —

When the trigger is pulled and
released, scanning is activated until programmable dura­tion

1

has elapsed or the trigger has been pulled again to

transition to another state. Double Read Timeout

1

pre-

vents undesired multiple reads while in this mode.

Flashing —

The laser flashes1 on and off regardless of the

trigger status.

Always On —

No trigger pull is required to read a bar code.
Scanning is continually on. If the trigger is pulled, the
reader acts as if it is in Trigger Single (Default) Mode. Dou­ble Read Timeout

1

prevents undesired multiple reads

while in this mode.

1. See the Product Reference Guide (PRG) for more informa­tion

Operating Mode

20 PowerScan™ PBT9300

Operating Mode (continued)

Multiple Label Reading

The reader offers a number of options for multiple label
reading. See the PRG or software configuration tool for
descriptions of these features and programming labels.

ENTER/EXIT PROGRAMMING MODE



Scan Mode = Trigger Single

Scan Mode = Trigger Pulse Multiple

Scan Mode = Trigger Hold Multiple

Scan Mode = Flashing

Scan Mode = Always On

Technical Specifications

Quick Reference Guide 21

Technical Specifications

The following tables contain Physical and Performance
Characteristics, User Environment and Regulatory infor­mation.

ITEM DESCRIPTION

PHYSICAL CHARACTERISTICS

Dimensions

Height: 212 mm
Length: 110 mm
Width: 74 mm

Weight 400 g

ELECTRICAL CHARACTERISTICS

Battery Type Li-Ion battery pack

Charge time for
full charge from
full discharge

4 hours with external power supply adapter

a

a. Charge Times are much lower when battery is within daily typical operating

condition.

Typical 10 hours with Host power (in this
case no supply adapter is needed)

a

Operating auton­omy (1 reading per
second)

50,000 reads (typical)

Cradle consump­tion and DC input
supply range

Volt 10-30 VDC; Power <8W

b

;
Max 500mA when in host/bus powered
mode

b

.

b. Typical input current measured under factory default configuration.

Technical Specifications

22 PowerScan™ PBT9300

ITEM DESCRIPTION

PERFORMANCE CHARACTERISTICS

PBT9300-XX PBT9300-ARXX

Light Source Laser

Roll (Tilt) Tolerance ± 35° ± 10°

Pitch Tolerance ± 40° ± 60°

Skew (Yaw) Tolerance ± 65° ± 65°

Print Contrast Mini­mum

25% minimum reflectance

Resolution 3 mils 7,5 mils

Scan Rate

104 (± 12) scans/sec 35 (± 5) scans/sec

Scan Angle 47° max 13.5°

(± 0.7°)

max

DEPTH OF FIELD (Typical)

Symbology

PBT9330-XX

5 mils 1 - 30 cm / 0.4 - 11.8’’

7.5 mils 1 - 38 cm / 0.4 - 15’’

10 mils 2 - 50 cm / 0.8 - 19.7’’

EAN 13 2 - 70 cm / 0.8 - 27.6’’

20 mils 2 - 110 cm / 0.8 - 43.3’’

40 mils 2 - 140 cm / 0.8 - 55.1’’

Symbology

PBT9300-ARXX

7.5 mils 9 - 50 cm / 3.5 - 19.7’’

10 mils 10 - 90 cm / 3.9 - 35.4’’

15 mils 12 - 185 cm / 4.7 - 72.8’’

20 mils 13 - 240 cm / 5.4 - 94.5’’

40 mils 13 - 380 cm / 5.4 - 149.6’’

55 mils 22 - 430 cm / 8.7 - 169.3’’

Reflective Label

70 mils Up to 9 m / 29 ft

100 mils Up to 11.5 m / 37 ft

Technical Specifications

Quick Reference Guide 23

DECODE CAPABILITY

PBT9300-XX

GS1 Databar linear codes, UPC/EAN, UPC/EAN P2/P5 Addons,
UPC/EAN Coupons, ISBN, Code128, EAN128, Code39, Code39 Full
ASCII, Code39 CIP, Code 32, Codabar, Interleaved 2 of 5, IATA, Indus­trial 2 of 5, Standard 2 of 5, Code11, MSI, Plessey, Code 93, Follet 2/
5, Code 4, Code 5, Datalogic 2 of 5, Codablock F

PBT9300-ARXX

GS1 Databar linear codes, UPC/EAN, UPC/EAN P2/P5 Addons,
UPC/EAN Coupons, ISBN, Code128, EAN128, Code39, Code39 Full
ASCII, Code39 CIP, Code 32, Codabar, Interleaved 2 of 5, Standard 2
of 5, MSI, Code 93

Interfaces Supported RS-232, Keyboard Wedge, and USB.

USER ENVIRONMENT

Operating Tempera­ture

-4° to 122° F (-20° to +50° C)

Storage Temperature -40° to 158° F (-40° to 70° C)

Humidity 0 to 95% non-condensing

Drop Specifications

Scanner withstands >50 times 6.5' (2 m)
drops to concrete

Ambient Light
Immunity

PBT9300-XX
100,000 Lux

PBT9300-ARXX
43,000 Lux

Contaminants:
Spray/rain,
Dust/particulates

IP65

ESD Level 20 KV

REGULATORY

Electrical Safety UL 60950, CSA C22.2 No. 60950, IEC 60950

EMI/RFI

North America (FCC) : Canada ( IC); Russia
( Gost); European Union R&TTE Directive;
Japan; Korean KCC; Taiwan; Australia;
Mexico

Laser Class Safety IEC Class 2

RADIO FEATURES

Frequency working
center

2400 to 2483.5 MHz

Range (in open air) up to 100 m

Max number of
devices per base sta­tion

7

LED and Beeper Indications

24 PowerScan™ PBT9300

LED and Beeper Indications

The reader’s beeper sounds and its LED illuminates to
indicate various functions or errors on the reader. An
optional “Green Spot” also performs useful functions. The
following tables list these indications. One exception to
the behaviors listed in the tables is that the reader’s func­tions are programmable, and so may or may not be turned
on. For example, certain indications such as the power-up
beep can be disabled using programming bar code labels.

Table 2. Normal Operating Indicators

INDICATION DESCRIPTION LED BEEPER

Power-up
Beep

The reader is in
the process of
powering-up.

N/A

Reader beeps
four times at
highest fre­quency and vol­ume upon power­up.

Good Read
Beep

A label has been
successfully
scanned by the
reader.

LED behavior is
configurable via
the feature
“Good Read:
When to Indi­cate” (see the
PRG for infor­mation.)

The reader will
beep once at cur­rent frequency,
volume, tonal
setting and dura­tion upon a suc­cessful label
scan.

Green Spot

a

flashes
momentarily

Upon success­ful read of a
label, the soft­ware turns the
green spot on
for the time
specified

N/A N/A

a

Except when in sleep mode or when a Good Read LED Duration other than 00 is

selected

LED and Beeper Indications

Quick Reference Guide 25

Table 3. Error Indicators

Programming Mode

-

The following indications ONLY

occur when the reader is in Programming Mode

.

INDICATION DESCRIPTION LED BEEPER

Link Attempt

The reader is try­ing to link to the
base

Slow
Flashes

N/A

Configuration
Alignment

Reader and Base
are aligning the
parameters' con­figuration

Fast Flashes N/A

Link

The reader has
successfully
linked to the base

N/A

3 beeps of
ascending fre­quency

Unlink

The reader has
unlinked from
the base

N/A

3 beeps of
descending fre­quency

ROM Failure

There is an error
in the reader's
software/pro­gramming

Flashes

Reader sounds
one error beep at
highest volume.

Limited
Scanning
Label Read

Indicates that a
host connection
is not estab­lished.

N/A

Reader 'chirps' six
times at the high­est frequency and
current volume.

Reader
Disabled

The reader has
been disabled by
the host.

The LED
blinks con­tinuously

N/A

INDICATION DESCRIPTION LED BEEPER

Label Pro­gramming
Mode Entry

A valid program­ming label has
been scanned.

LED blinks
continu­ously

Reader sounds
four low fre­quency beeps.

Label Pro­gramming
Mode Rejec­tion of Label

A label has been
rejected.

N/A

Reader sounds
three times at
lowest frequency
and current vol­ume.

LED and Beeper Indications

26 PowerScan™ PBT9300

INDICATION DESCRIPTION LED BEEPER

Label Pro­gramming
Mode Accep­tance of Par­tial Label

In cases where
multiple labels
must be scanned
to program one
feature, this indica­tion acknowledges
each portion as it is
successfully
scanned.

N/A

Reader sounds
one short beep at
highest fre­quency and cur­rent volume.

Label Pro­gramming
Mode Accep­tance of Pro­gramming

Configuration
option(s) have been
successfully pro­grammed via labels
and the reader has
exited Program­ming Mode.

N/A

Reader sounds
one high fre­quency beep and
4 low frequency
beeps followed by
reset beeps.

Label Pro­gramming
Mode Cancel
Item Entry

Cancel label has
been scanned.

N/A

Reader sounds
two times at low
frequency and
current volume.

Cleaning

Quick Reference Guide 27

Cleaning

Exterior surfaces and scan windows exposed to spills,
smudges or debris require periodic cleaning to ensure
best performance during scanning.

Use a soft, dry cloth to clean the product. If the product is
very soiled, clean it with a soft cloth moistened with a
diluted non-aggressive cleaning solution or diluted ethyl
alcohol.

CAUTION

Do not use abrasive or aggressive cleansing
agents or abrasive pads to clean scan win­dows or plastics.

Do not spray or pour liquids directly onto the
unit.

Datalogic ADC Limited Factory Warranty

28 PowerScan™ PBT9300

Datalogic ADC Limited Factory
Warranty

Warranty Coverage

Datalogic warrants to Customer that Datalogic's products will be
free from defects in materials and workmanship for a period of
one year from product shipment. Datalogic (“Datalogic”) hard­ware products are warranted against defects in material and
workmanship under normal and proper use. The liability of Data­logic under this warranty is limited to furnishing the labor and
parts necessary to remedy any defect covered by this warranty
and restore the product to its normal operating condition. Repair
or replacement of product during the warranty does not extend
the original warranty term. Products are sold on the basis of
specifications applicable at the time of manufacture and Data­logic has no obligation to modify or update products once sold.

If Datalogic determines that a product has defects in material or
workmanship, Datalogic shall, at its sole option repair or replace
the product without additional charge for parts and labor, or cred­it or refund the defective products duly returned to Datalogic. To
perform repairs, Datalogic may use new or reconditioned parts,
components, subassemblies or products that have been tested
as meeting applicable specifications for equivalent new material
and products. Customer will allow Datalogic to scrap all parts re­moved from the repaired product. The warranty period shall ex­tend from the date of shipment from Datalogic for the duration
published by Datalogic for the product at the time of purchase
(Warranty period). Datalogic warrants repaired hardware devices
against defects in workmanship and materials on the repaired
assembly for a 90 day period starting from the date of shipment
of the repaired product from Datalogic or until the expiration of
the original warranty period, whichever is longer. Datalogic does
not guarantee, and it is not responsible for, the maintenance of,
damage to, or loss of configurations, data, and applications on the
repaired units and at its sole discretion can return the units in the
“factory default” configuration or with any software or firmware
update available at the time of the repair (other than the firm­ware or software installed during the manufacture of the prod­uct). Customer accepts responsibility to maintain a back up copy
of its software and data.

Warranty Claims Process

In order to obtain service under the Factory Warranty, Customer
must notify Datalogic of the claimed defect before the expiration
of the applicable Warranty period and obtain from Datalogic a re­turn authorization number (RMA) for return of the product to a
designated Datalogic service center. If Datalogic determines Cus­tomer’s claim is valid, Datalogic will repair or replace product
without additional charge for parts and labor. Customer shall be
responsible for packaging and shipping the product to the desig­nated Datalogic service center, with shipping charges prepaid.
Datalogic shall pay for the return of the product to Customer if
the shipment is to a location within the country in which the Da-

Datalogic ADC Limited Factory Warranty

Quick Reference Guide 29

talogic service center is located. Customer shall be responsible
for paying all shipping charges, duties, taxes, and any other
charges for products returned to any other locations. Failure to
follow the applicable RMA policy, may result in a processing fee.
Customer shall be responsible for return shipment expenses for
products which Datalogic, at its sole discretion, determines are
not defective or eligible for warranty repair.

Warranty Exclusions

The Datalogic Factory Warranty shall not apply to:

(i) any product which has been damaged, modified, altered,

repaired or upgraded by other than Datalogic service per­sonnel or its authorized representatives;

(ii) any claimed defect, failure or damage which Datalogic

determines was caused by faulty operations, improper
use, abuse, misuse, wear and tear, negligence, improper
storage or use of parts or accessories not approved or
supplied by Datalogic;

(iii) any claimed defect or damage caused by the use of prod-

uct with any other instrument, equipment or apparatus;

(iv) any claimed defect or damage caused by the failure to

provide proper maintenance, including but not limited to
cleaning the upper window in accordance with product
manual;

(v) any defect or damage caused by natural or man-made

disaster such as but not limited to fire, water damage,
floods, other natural disasters, vandalism or abusive
events that would cause internal and external compo­nent damage or destruction of the whole unit, consum­able items;

(vi) any damage or malfunctioning caused by non-restoring

action as for example firmware or software upgrades,
software or hardware reconfigurations etc.;

(vii) the replacement of upper window/cartridge due to

scratching, stains or other degradation and/or

(viii) any consumable or equivalent (e.g., cables, power supply,

batteries, keypads, touch screen, triggers etc.).

No Assignment

Customer may not assign or otherwise transfer its rights or obli­gations under this warranty except to a purchaser or transferee
of product. No attempted assignment or transfer in violation of
this provision shall be valid or binding upon Datalogic.

DATALOGIC'S LIMITED WARRANTY IS IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, ORAL OR WRITTEN, STATU­TORY OR OTHERWISE, INCLUDING, WITHOUT LIMITATION, ANY
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, OR NONINFRINGEMENT. DATALOGIC
SHALL NOT BE LIABLE FOR ANY DAMAGES SUSTAINED BY CUS­TOMER ARISING FROM DELAYS IN THE REPLACEMENT OR RE­PAIR OF PRODUCTS UNDER THE ABOVE. THE REMEDY SET
FORTH IN THIS WARRANTY STATEMENT IS THE CUSTOMER’S
SOLE AND EXCLUSIVE REMEDY FOR WARRANTY CLAIMS. UNDER
NO CIRCUMSTANCES WILL DATALOGIC BE LIABLE TO CUSTOMER

Ergonomic Recommendations

30 PowerScan™ PBT9300

OR ANY THIRD PARTY FOR ANY LOST PROFITS, OR ANY INCIDEN­TAL, CONSEQUENTIAL IN-DIRECT, SPECIAL OR CONTINGENT
DAMAGES REGARDLESS OF WHETHER DATALOGIC HAD AD­VANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.

Risk of Loss

Customer shall bear risk of loss or damage for product in transit
to Datalogic. Datalogic shall assume risk of loss or damage for
product in Datalogic’s possession. In the absence of specific writ­ten instructions for the return of product to Customer, Datalogic
will select the carrier, but Datalogic shall not thereby assume any
liability in connection with the return shipment.

Ergonomic Recommendations

• Reduce or eliminate repetitive motion

• Maintain a natural position

• Reduce or eliminate excessive force

• Keep objects that are used frequently within
easy reach

• Perform tasks at correct heights

• Reduce or eliminate vibration

• Reduce or eliminate direct pressure

• Provide adjustable workstations

• Provide adequate clearance

• Provide a suitable working environment

• Improve work procedures.

CAUTION

In order to avoid or minimize the potential risk
of ergonomic injury follow the recommenda­tions below. Consult with your local Health &
Safety Manager to ensure that you are adher­ing to your company’s safety programs to pre­vent employee injury.

Services and Support

Quick Reference Guide 31

Services and Support

Datalogic provides several services as well as technical
support through its website. Log on to www.datalogic.

com and click on the links indicated for further informa-

tion.

PRODUCTS

Search through the links to arrive at your product page
where you can download specific Manuals and Software &

Utilities, including:

• Datalogic Aladdin™

, a multi-platform utility pro­gram that allows device configuration using a PC. It
provides RS-232 and USB-COM interface configu­ration, printing of configuration bar codes, and
firmware upgrades.

SERVICE & SUPPORT

• Technical Support

- Product documentation and
programming guides and Technical Support
Department in the world

• Service Programs - Warranty Extensions and

Maintenance Agreements

• Repair Services - Flat Rate Repairs and Return

Material Authorization (RMA) Repairs

• Downloads – Manuals & Documentation, Data

Sheets, Product Catalogs, etc.

CONTACT US

• Information Request Form and Sales & Service
Network

Hex-Numeric Keypad

32 PowerScan™ PBT9300

Hex-Numeric Keypad

Use the barcodes that follow to enter numbers as you
would select digits/characters from a keypad.

0

1

2

3

4

5

Hex-Numeric Keypad

Quick Reference Guide 33

Hex-Numeric Keypad (continued)

6

7

8

9

Hex-Numeric Keypad

34 PowerScan™ PBT9300

Hex-Numeric Keypad (continued)

A

B

C

D

E

F

Hex-Numeric Keypad

Quick Reference Guide 35

For HID Variable Pin Code only

If you make a mistake, scan the CANCEL barcode below
to abort and not save the entry string. You can then
restart.

Finish by scanning the Exit HID Variable PIN Code label.

Cancel an incomplete HID Variable PIN Code

Exit HID Variable PIN Code

Hex-Numeric Keypad

36 PowerScan™ PBT9300

NOTES

ANATEL (Brazil conformity)

Modelo POWERSCAN P BT95

Base carregadora BC 9030 - BT ,

BC9130

-

BT e BC9180-BT

BT9500 e PBT9300

BT e BC9180

BT

BC9130

Base carregadora BC 9030 BT

Datalogic ADC S.r.l.

Via S. Vitalino, 13 | 40012 |Lippo, Calderara di Reno (BO)| Italy
Telephone: [phone] | Fax: [phone]

www.datalogic.com

820081514 Rev. A June 2016

©2013-2016 Datalogic ADC S.r.l. • All rights reserved.
Datalogic and the Datalogic logo are registered trademarks of
Datalogic S.p.A. in many countries, including the U.S.A. and the
E.U. PowerScan is a trademark of Datalogic S.p.A. or of Datalogic
Group companies, registered in many countries, including the U.S.
and the E.U.