Datalogic C-8000 Quick Reference Manual
Datalogic Scanning, Inc.
959 Terry Street
Eugene, Oregon 97402
USA
Telephone: (541) 683-5700
Fax: (541) 345-7140
A
n Unpublished Work - All rights reserved. No part of the contents of this documentation or the
procedures described therein may be reproduced or transmitted in any form or by any means without
prior written per-mission of Datalogic Scanning, Inc. or its subsidiaries or affiliates ("Datalogic" o
r
“Datalogic Scanning”). Owners of Datalogic products are hereby granted a non-exclusive, revocable
license to reproduce and transmit this documentation for the purchaser's own internal business purposes.
Purchaser shall not remove or alter any proprietary notices, including copyright notices, contained in this
documentation and shall ensure that all notices appear on any reproductions of the documentation.
Should future revisions of this manual be published, you can acquire printed versions by contacting you
r
Datalogic representative. Electronic versions may either be downloadable from the Datalogic website
(www.scanning.datalogic.com) or provided on appropriate media. If you visit our website and would like to
make comments or suggestions about this or other Datalogic publications, please let us know via the
"Contact Datalogic" page.
DISCLAIMER
Datalogic has taken reasonable measures to provide information in this manual that is complete and
accurate, however, Datalogic reserves the right to change any specification at any time without prio
r
notice. Datalogic is a registered trademark of Datalogic S.p.A. in many countries and the Datalogic logo is
a trademark of Datalogic S.p.A. all licensed to Datalogic Scanning, Inc. All other trademarks and trade
names referred to herein are property of their respective owners.
SERVICE AND SUPPORT
Datalogic provides several services as well as technical support through its website. Log on to
www.scanning.datalogic.com and click on the links indicated for further information including:
• PRODUCTS
Search through the links to arrive at your product page where you can download specifi
c
Manuals and Software & Utilities including:
- Datalogic Aladdin™ a multi-platform utility program that allows device configuration using a
PC. It provides RS-232 interface configuration as well as configuration barcode printing.
• SERVICE & SUPPORT
- Technical Support - Product documentation and programming guides and Technical Support
Department in the world
- Service Programs - Warranty Extensions and Maintenance Agreements
- Repair Services - Flat Rate Repairs and Return Material Authorization (RMA) Repairs.
- Downloads – Manuals & Documentation, Data Sheets, Product Catalogues, etc.
• CONTACT US
Information Request Form and Sales & Service Network
WARRANTY
Datalogic warranties this product against defects in workmanship and materials, for a period of 3 years
from the date of shipment, provided that the product is operated under normal and proper conditions.
Datalogic has the faculty to repair or replace the product; these provisions do not prolong the original
warranty term.
The warranty does not apply to any product that has been subject to misuse, accidental damage,
Datalogic Scanning, Inc.
959 Terry Street
Eugene, OR 97402
USA
07
dichiara che
declares that the
déclare que le
bescheinigt, daß das Gerät
declare que el
C-8000
e tutti i suoi modelli
and all its models
et tous ses modèles
und seine Modelle
y todos sus modelos
sono conformi alle Direttive del Consiglio Europeo sottoelencate:
are in conformity with the requirements of the European Council Directives list ed below:
sont conformes aux spécifications des Directives de l'Union Européenne ci-dessous:
den nachstehenden angeführten Direktiven des Europäischen Rats:
cumple con los requisitos de las Directivas del Consejo Europeo, según la lista sig uiente:
89/336/EEC EMC Directive
e
92/31/EEC, 93/68/EEC
emendamenti successivi
and
further amendments
et
ses successifs amendements
und
späteren Abänderungen
y
succesivas enmiendas
Basate sulle legislazioni degli Stati membri in relazione alla compatibilità elettromagnetica ed alla
sicurezza dei prodotti.
On the approximation of the laws of Member States relating to electromagnetic compatibility and product
safety.
Basée sur la législation des Etats membres relative à la compatibilité électromagnétique et à la sécurité
des produits.
Über die Annäherung der Gesetze der Mitgliedsstaaten in bezug auf elektromagnetische Verträglichkeit
und Produktsicherheit entsprechen.
Basado en la aproximación de las leyes de los Países Miembros respecto a la compatibilidad
electromagnética y las Medidas de seguridad relativas al producto.
Questa dichiarazione è basata sulla conformità dei prodotti alle norme seguenti:
This declaration is based upon compliance of the products to the following standar ds:
Cette déclaration repose sur la conformité des produits aux normes suivantes:
Diese Erklärung basiert darauf, daß das Produkt den folgenden Normen entspricht:
Esta declaración se basa en el cumplimiento de los productos con las siguientes normas:
EN 55022 (C
LASS B ITE), August 1994:
A
MENDMENT A1 (CLASS B ITE), October 2000:
L
IMITS AND METHODS OF MEASUREMENTS OF RADIO
DISTURBANCE CHARACTERISTICS OF INFORMATION
TECHNOLOGY EQUIPMENT
EN 61000-6-2, October 2001:
E
LECTROMAGNETIC COMPATIBILITY (EMC).
P
ART 6-2: GENERIC STANDARDS – IMMUNITY FOR
INDUSTRIAL ENVIRONMENTS
.
March 1st, 2007
C-8000
BATTERY CHARGER
QUICK REFERENCE GUIDE
820002080 (Rev. A) 12/07
UPDATES AND LANGUAGE AVAILABILITY
UK/US
The latest drivers and documentation updates for this product are available on
Internet.
Log on to: www.scanning.datalogic.com
I
Su Internet sono disponibili le versioni aggiornate di driver e documentazione di
questo prodotto. Questo manuale è disponibile anche nella versione italiana.
Collegarsi a: www.scanning.datalogic.com
F
Les versions mises à jour de drivers et documentation de ce produit sont
disponibles sur Internet. Ce manuel est aussi disponible en version française.
Cliquez sur : www.scanning.datalogic.com
D
Im Internet finden Sie die aktuellsten Versionen der Treiber und Dokumentation für
dieses Produkt. Die deutschsprachige Version dieses Handbuches ist auch
verfügbar.
Adresse : www.scanning.datalogic.com
E
En Internet están disponibles las versiones actualizadas de los drivers y
documentación de este producto. También está disponible la versión en español
de este manual.
Dirección Internet : www.scanning.datalogic.com
SYSTEM CONNECTIONS
CAUTION
Connections should always be made with power off!
Apply power to C-8000 by connecting a power supply unit to the connector on the
rear panel of the battery charger. C-8000 is ready to charge PowerScan
®
M8300
laser readers.
SERIAL CONFIGURATION OPTIONS
In addition to the battery charge function, C-8000 can be connected to a PC by
means of an RS-232/USB interface to send new configuration strings from the PC
to the scanner, to upgrade application software onto the PowerScan
®
M8300
reader or optionally when performing the copy configuration procedure.
To proceed with these operations, connect an RS-232 or USB cable between
C-8000 and the PC. Connect the power supply to C-8000. Insert the
PowerScan
®
M8300 reader into the battery charger.
COMPLIANCE
This device must be opened by qualified personnel only.
POWER SUPPLY
This device is intended to be supplied by a UL Listed/CSA Certified Power Unit
marked "Class 2" or LPS power source rated 10-30 V DC, minimum 1 A, which
supplies power directly to the device.
FCC COMPLIANCE
Modifications or changes to this equipment without the expressed written approval
of Datalogic could void the authority to use the equipment.
This device complies with PART 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference which
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference a
t
his own expense.
WEEE COMPLIANCE
For information about the disposal of Waste Electrical and Electronic
Equipment (WEEE), please refer to the website at
www.scanning.datalogic.com
.
USING C-8000 BATTERY CHARGER
C-8000 is a battery charger for PowerScan
®
M8300 laser readers.
The LEDs signal the C-8000 status, as described in the following table:
LED STATUS
Aux Yellow On = C-8000 is powered through an external power supply.
Yellow Blinking = C-8000 transmission occurs over the Host port.
Host Yellow On = C-8000 is powered by the Host.
Yellow Blinking = C-8000 transmission occurs over the Host port.
Reader Green On = the reader battery is completely charged.
Red On = the reader battery is charging.
Orange Blinking = reader battery fault – replace battery.
Red / Green Alternatively Blinking = charging error – see Ref. Manual
Spare* Green On = the spare battery is completely charged.
Red On = the spare battery is charging.
Orange Blinking = spare battery fault – replace battery.
Red / Green Alternatively Blinking = charging error – see Ref. Manual
• This LED refers to the accessory SBS-8000 Spare Battery Slot when mounted to the
C-8000.
Figure 1 – C-8000 Overview Figure 2 – C-8000 LEDs
TECHNICAL FEATURES
Electrical Features
Supply voltage
External Power 10..30 VDC
Host Power 5 VDC ±10%
Power consumption
External Power max. 10 W (charging) *
Host Power max. 500 mA (charging)
Indicators Ext. Power/Data yellow LED
USB power/data yellow LED
Reader batt. state green/red LED
Spare batt. state green/red LED
beeper
Time of recharge
External Power max. 4 hours with 2150 mAh Li-Ion battery
Host Power max. 10 hours with 2150 mAh Li-Ion battery
Environmental Features
Working temperature 0° to +40 °C / +32° to +104 °F
Storage temperature -20° to +70 °C / -4° to +158 °F
Humidity 90 % non condensing
Protection Class IP40
Mechanical Features
Weight about 380 g. / 13.4 oz
Dimensions 204 x 108 x 95 mm / 9.44 x 4.25 x 3.74 in
Material ABS
* Having a switching regulator inside, the C-8000 draws the same power,
regardless of the supply voltage. i.e. as the input voltage increases the
current drawn decreases.
RS-232/USB
Interface
Connector
Power Supply
INSTALLATION
The C-8000 can be mounted for portable or fixed desktop usage, or it can be fixed
to a wall. The horizontal base allows portable and fixed desktop usage, while the
inclined base provides desktop and wall mounting guaranteeing a comfortable
handling of the Powerscan® M8300 reader.
The cradle package contains the following items:
C-8000 1 horizontal base
C-8000 Quick Reference Guide 1 inclined base
2 adhesive strips 2 wall-mounting lock hinges
4 rubber feet
DESKTOP MOUNTING
Figure 3 - Horizontal Base Front and Bottom View
Figure 4 - Inclined Base Front and Bottom View
Portable Desktop Use
1. Correctly position the C-8000 onto the base by sliding it along the mounting
tabs until aligned.
1
2
1
2
2. Carefully clean the rubber foot seats of the base to remove any impurities
that could reduce adhesion.
3. Remove the protective plastic from the rubber feet and stick them onto the
bottom surface of the base.
Fixed Desktop Use
For fixed desktop installation, use the adhesive strips or fixing screws (not
provided) according to your needs.
For mounting with adhesive strips:
1. Position the cradle onto the base by sliding it along the mounting tabs until
aligned.
2. Carefully clean the adhesive strip seats of the base to remove any impurities
that could reduce adhesion.
3. Remove the protective plastic from one side of the adhesive strips and stic
k
them onto the base surface.
4. Position the cables to be connected to the C-8000 cradle along the
dedicated channels.
5. Remove the plastic from the other side of the strips and affix the base to the
table.
For mounting with screws:
1. Position the cables to be connected to the C-8000 cradle along the
dedicated channels.
2. Position the base on the table and affix it by means of the screws (not
provided).
3. Position the cradle on the base by sliding it along the mounting tabs until
aligned.
WALL MOUNTING
1. Remove the yellow caps and insert the two wall mounting lock hinges
provided with your cradle.
2. Position the cables to be connected to the C-8000 cradle along the
dedicated channels.
If using the adhesive strips:
3. Carefully clean the adhesive
strip seats of the base to
remove any impurities that
could reduce adhesion.
4. Remove the protective plastic
from one side of the adhesive
strips and stick them onto the
base surface.
5. Remove the plastic from the
other side of the strips and affix
the base to the wall as
indicated in the figure below.
If using the mounting screws:
3. Using the mounting holes on
the base as a pattern, mark the
wall where you desire to mount
the C-8000.
4. Drill the appropriate size holes
and insert the threaded dowels
(not provided) into the holes.
5. Position the base on the wall as
indicated in the figure below
and affix it by means of the
screws (not provided).
Inclined Base Wall-mounting
6. Attach the cradle on the base by sliding it along the mounting tabs until
aligned.
Mounting Tabs (4)
Mounting Holes (2)
Rubber Foot Seat (4)
Adhesive Strip Seat (2)
Cable Channels
Mounting Tabs (4)
Mounting Holes (4)
Adhesive Strip Seat (2)
Cable Channels
Rubber Foot Seat (4)
Loading...