Danfoss TP9 Data sheet
Datasheet
Zone Valves
Cylinder
Stat
AVDO
Remote
Sensor
TP9
Wiring
Box
Feed &
Expansion Tank
Mains
Water
Zone Valve
Cylinder
Stat
AVDO
Remote
Sensor
TP9
Wiring
Box
Feed &
Expansion Tank
Mains
Water
TP9
Programmable Room Thermostat
with DHW Time Control
Features
The TP9 is a programmable room thermostat with
remote temperature sensor. The TP9 allows the
user to select up to 6 dierent temperature levels
per day and the times when the changes occur.
The TP9 can be set at installation to operate in
either 5 day/2 day mode, which allows dierent
programmes to be set for the weekend, or in 24
hour mode, in which case the programmed events
are repeated every 24 hours.
The operating temperature range, which is
factory preset to 5-30°C, can also be reset at time
of installation to 16-30°C making the TP9 a safe
solution for use in sheltered accommodation
where hypothermia may be of concern.
For installation convenience, the TP9 is supplied
with a remote sensor which can be mounted up
to 15 metres away from the programming unit.
In addition to the programmable room thermostat
function, TP9 also incorporates a Domestic Hot
Water time control channel which allows up to 2
Domestic Hot Water events to be programmed
each day.
A Pumped/Gravity Domestic Hot Water option can
be set at installation making TP9 suitable for both
Pumped and Semi-Gravity Hot Water systems.
The TP9 incorporates convenient user overrides
which allows the user to:
- Obtain an extra hour’s water heating.
- Temporarily override room temperatures up or
down.
- Select “Water Only” operation for Summer use.
- Select Heating and Water O, with frost
protection for periods away from home.
l Up to 6 time/temperature changes per day for
heating.
l Can be set at installation for 24 hour or 5 day/2
day operation.
l Remote sensor for installation convenience.
l Integrated DHW time control.
l Convenient user overrides.
l Clear, easy to read LCD display and LED status
indicators.
l Wallplate construction for ease of installation.
Application
Heatplan Control System
Part No. 318 Iss. 04 08/06
Heatshare Control System
1
Datasheet
REMOTE
SENSOR
N/C
N/O
N/C
N/O
ELECTRONICS
N
OFF
DHW
L 1 2 3
4
5
6
OFF
HTG
ON
DHW
ON
HTG
TP9 Programmable Room Thermostat
Specications
TP9
Code Number 087N667500
Room time and temperature changes up to 6 per day
Room temperature control range (°C) 5-30°C or 16-30°C
Remote room temperature sensor
Selectable 5/2 day or 24 hour operating mode
DHW time control events up to 2 per day
Pumped or gravity DHW option
DHW only mode - summer operation
Frost protection override option
+1, -1 hour DHW override
Room temperature overrides
Setting 1
Heating Programme
Factory preset times and temperatures for every day in 24 hour
mode or Mon-Fri 5/2 day mode.
Heating Programme
Factory preset times and temperatures Saturday and Sunday in
5/2 day mode.
Water Programme
Factory preset On/O times
Voltage rating 220/240 Vac, 50Hz
Switch action 2 x SPDT (linked internally)
Switch current rating 3 (1) A
Maximum ambient temperature 45°C
Memory back-up
Dimensions - Controller (mm) 135 wide x 88 high x 32 deep
Dimensions - TS1 Remote Sensor (mm) 61 wide x 45 high x 22 deep
Setting 2 16°C 8:30am
Setting 3 19°C 12:30pm
Setting 4 16°C 1:30pm
Setting 5 21°C 5:30pm
Setting 6 16°C 10:30pm
Setting 1
Setting 2 16°C 10:00am
Setting 3 19°C 12:00pm
Setting 4 16°C 2:00pm
Setting 5 21°C 5:00pm
Setting 6 16°C 10:30pm
Setting A ON 6:30am
Setting b OFF 8:30am
Setting C ON 5:30pm
Setting d OFF 10:30pm
During a power cut, the time is retained for 15 days,
afterwhich the clock must be reset. The programme
(factory and/or user set) is retained for the life of the unit.
l
l
l
l
l
l
l
20°C 6:30am
20°C 7:00am
NB
All may be
changed as
required.
NB
All may be
changed as
required.
NB
All may be
changed as
required.
Wiring Details
Danfoss can accept no responsibility for possible errors in catalogues, brochures, and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already
on order provided that such alterations can be made without subsequent changes being necessary in specifications already agreed.
All trademarks in this material are propert y of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
Danfoss Randall Ltd.
2
Ampthill Road
Bedford MK42 9ER
Tel: 0845 1217 400
Fax: 0845 1217 515
Email: danfossrandall@danfoss.com
Website: www.danfoss-randall.co.uk
Part No. 318 Iss. 04 08/06
VDRMA102
Loading...