Danfoss TMP MDC Data sheet

MAKING MODERN LIVING POSSIBLE

Data Sheet

Transit Mixer Pump 070/089 cm TMP MDC

For more than 40 years, Danfoss has been developing state-of-the-art components and systems for mobile machinery used in oﬀ-highway operations around the world. We have become a preferred supplier by oﬀering the best of what really matters: The hardware inside your vehicle application. TMP MDC – our new generation of servocontrolled hydrostatic pumps – has been specially designed for Transit Mixer applications.

The TMP MDC is built around an advanced mechanical control and is available in 70 cm³ and 89 cm³ pump displacements. Oﬀering high quality and reliability, the new pump provides expanded functionality, greater total eﬃciency, and easy installation on the Transit Mixer.

The TMP MDC CCO control and sensors options are P LUS+1® Compliant. PLUS+1 allows you to rapidly develop and customize electronic machine control. It opens up the future by combining machine controls and diagnostics in an integrated operating network.

Features y Designed for quality and reliability

– Designed speciﬁcally for Transit Mixer

applications – Robust rotating group concept – Robust control concept – Based on the latest technological

developments

y Installation and packaging beneﬁts

– All connections are located on one side – Include Manual Overides – Length optimized pump – Through drive pump – Coupling ﬂange or spline shaft availability – High corner power – Standard connector interface – Metric connections – Expanded functionality through PLUS+1®

L1214176 • Rev BA • Dec 2013

y Optimized for manual control

– Maual Displacement Control (MDC)

including Emergency stop valve with function Cut oﬀ (CCO)

y Expanded functionality

– Emergency stop Cut oﬀ valve (CCO) – PLUS+1 Compliant control and sensor

options

– Speed and temperature sensors

y Greater total eﬃciency

– Minimized control losses – Proven rotating group from Series 20 – Low control pressure and control loses

Data Sheet Transit Mixer Pump 070/089 cm3, TMP MDC

Ø71.7 max [Dia2.823]

to be paint free

[11.496 ]

SchematicTechnical Speciﬁcations

Physical properties

Features Unit

Displacement cm3 [in3] 68 .3 [4 .17] 89.0 [5.43] Weight dry

(standard)

kg [lb] 61 [135]

Size

070 089

Operating parameters

Features Unit

Input speed

System pressure

Case pressure

* Applied pressures above maximum working pressure requires Danfoss application approval.

Dimensions

Minimum Rated 2500 Maximum 2900 Max. working pressure* Maximum pressure 450 [6525] Minimum pressure 10 [145] Rated pressure

Maximum pressure 5.0 [73]

+0.8

4 x Ø15

-0.3

+0.031

[Dia 0.591 ]

-0.012

57.25

[2.254]

164

114.5

[6.457]

[4.508]

57.25

[2.254]

114.5

[4.508]

146

[5.748]

111.4

[4.386]

Charge pump inlet S

121

[4.764]

[3.504]

min-1

(rpm)

bar

[psi]

bar

[psi]

43.9

[1.728]

(295.5)

[11.635]

Gauge port M1 System pressure Port A, M12x1.5

12.7 [.5] full thread depth

Case drain port L1 use highest port as outlet M22x1.5 - 11 min [.433] depth

184.0

[7.254]

Size

070 / 089

500

420 [6090]

3.0 [44]

[0.394]

9.9

[0.389]

Ø84

[Dia 3.307]

Gauge port M4 Servo pressure M12x1.5

High pressure relief valve Port A

Charge pressure relief valve

98.8

[3.89]

Ø127

P0055 68

ISO 3019-1 (SAE C, 23-teeth) ISO 3019-1 (SAE C, 21-teeth)

‘-’‘+’

Auxiliary mounting pad

Flange 127 - 4

per ISO3019 (SAE J744C)

[0.366]

[0.091]

-0.05

-0.002 0

Ø84

Ø100 ±0.3

[Dia 3.307 ]

[Dia 3.937 ±0.012]

[Dia 4.999 ]

[Dia 0.319 ]

Spline data:

Number of teeth: 23 Pitch fraction: 16/32 Pressure angle: 30° Pitch Ø: 36.513 [1.438] Meas. over pins: 40.973/41.024 [1.6131/1.6151] Pin Ø: 3.048 [0.12]

8.5

[0.335]

9.3

2.3

-0.06

-0.002

[2.244 ]

Ø8.1

12.4 ±0.25

[0.488 ±0.01]

+0.23 +0.08 +0.009 +0.003

Paint free

58.2

[2.291]

18.8

[0.738]

[3.086]

78.4

[3.781]

87,8

[3.457]

M10 SL2M2

Charge pump inlet S

M42x2 - 6H

20 [0.79]

full thread depth

74,5

[2.933]

Ø12.5

[Dia0.492]

[3.624]

25.8 [1.016]

[3.386]

139

[5.465]

187

[7.366]

263

[10.353]

Spline data:

Number of teeth: 21 Pitch fraction: 16/32 Pressure angle: 30° Pitch Ø: 33.338 [1.313] Meas. over pins: 37.783/37.833 [1.4875/1.4895] Pin Ø: 3.048 [0.12]

304.5

[11.99]

[12.458]

316.4

R 50.8

[2]

Ø26 (2x)

[Dia1.024]

[0.866]

[Dia 2.362]

M6-6H (4x) depth 10 min [0.3937]

Ø60

M1L1

57.2 (2x) [2.252]

Paint free

Ø50 min [Dia1.97]

P0055 66

[1.094 ]

27.8 (2x)

Split ange boss DN25 typ I 420 bar Series per ISO 6162 M12, 21 [0.83] full thread depth

110

[4.331]

292

Gauge port M10

Charge pump inlet pressure

M12x1.5; 12.7 [.5] full thread depth

Danfoss Power Solutions US Company

2800 East 13th Street Ames, IA 50010, USA Phone: +1 515 239 6000

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in speciﬁcations already agreed. All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

Gauge port M2 System pressure Port B, M12x1.5; 12.7 [.5] full thread depth

Danfoss Power Solutions GmbH & Co. OHG

Krokamp 35 D-24539 Neumünster, Germany Phone: +49 4321 871 0

High pressure relief valve Port B

Gauge port M3 Charge pressure M12x1.5

12.7 [0.5] full thread depth

Connector Deutsch DTM06-6S

Gauge port M5 Servo pressure M12x1.5

P0055 67

Coupling Diameter

Ø71.7 max [Dia2.823]

Full spline lenght

M10-6H

20 min

-0.2

-0.08

[0.787]

Ø32

Ø37.6 ±0.09

[Dia1.48 ±0.004]

Coupling must not protrude beyond this point

Mounting ange surface Flange SAE-C per ISO 3019-1 to be paint free

R2 ±0.11

[0.079 ±0.004]

[Dia1.26 ]

34.35

-0.5

[1.352 ]

-0.02

47.5 ±0.2

[1.87 ±0.008]

[2.205]

Danfoss Power Solutions ApS

Nordborgvej 81 DK-6430 Nordborg, Denmark Phone: +45 7488 2222