Danfoss TLY5.7KK.3 Data sheet

TLY5.7KK.3

102H

4642

TLY5.7KK.3

R600a

SUCTION CONNECTOR

8538-2

DANFOSS COMPRESSORS

Barcode on white background

Yellow background

Red stripe

Approvals

Application

8122

R600a

Yellow warning label

157

60.5

102

117

51°

20°

45°

170

178

100

ø16

186

204

ø9

105

107

105

30°

31.5°

28°

176

222

8244

High Energy-optimized Compressor R600a 220-240V 50Hz

General

Code number

Approvals EN 60335-2-34 with Annex AA

Compressors on pallet

Application

Frequency Hz

Evaporating temperature

Voltage range

Max. condensing temperature continuous (short)

Max. winding temperature continuous (short)

°C -35 to -10 –

V 198 - 254 –

°C 60 (70) –

°C 125 (135) –

102H4642

125

LBP

50 60

Cooling requirements

Frequency Hz

Application

32°C S – – – – –

38°C S – – – – –

43°C S – – – – –

Remarks on application:

Motor

Motor type

LRA (rated after 4 sec. UL984), HST | LST

Cut in Current, HST | LST

Resistance, main | start winding (25°C)

Design

Displacement

Oil quantity (type)

Maximum refrigerant charge

Free gas volume in compressor

Weight without electrical equipment

Dimensions

Height

Suction connector location/I.D. mm | angle

Process connector location/I.D. mm | angle

Discharge connector location/I.D. mm | angle

Oil cooler connector location/I.D. mm | angle

Connector tolerance I.D. mm

Remarks:

December 2005 DEHC.ED.520.Y1.02 1/2

50 60

LBP MBP HBP LBP MBP HBP

RSIR/RSCR

A – 2.3

A – 6.3

Ω 35.0 21.0

180 (mineral)

g 150

kg 6.8

mm A 163

B 159

B1 –

B2 –

material | comment Cu-plated steel | Al caps

C 6.2 | 30°

D 6.2 | 31.5°

E 5.0 | 28°

material | comment Cu-plated steel | Al caps

F –

material | comment

±0.09, on 5.0 +0.12/+0.20

S = Static cooling normally suﬃcient O = Oil cooling F1 = Fan cooling 1.5 m/s (compressor compartment temperature equal to ambient temperature) F2 = Fan cooling 3.0 m/s necessary SG = Suction gas cooling normally suﬃcent – = not applicable in this area

5.70

1690

–

EN 12900 Household (CECOMAF) 220V, 50Hz, 2 W PTC consumption incl., static cooling

8223

Winding protector

Start winding

Main winding

pos.2

8217

Winding protector

Start winding

Main winding

pos.1

Evap. temp. in °C

Capacity in W

Power cons. in W

Current cons. in A

COP in W/W

-45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

36.4 50.7 68.0 74.7 89.0 114 144

49.7 57.9 66.0 68.8 74.3 83.1 92.8

0.41 0.43 0.46 0.47 0.49 0.52 0.55

0.73 0.87 1.03 1.09 1.20 1.37 1.55

EN 12900 Household (CECOMAF) 220V, 50Hz, RC 4µF, 2 W PTC consumption incl., static cooling

Evap. temp. in °C

Capacity in W

Power cons. in W

Current cons. in A

COP in W/W

-45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

36.4 50.7 68.0 74.7 89.0 114 144

48.5 56.3 64.0 66.7 71.9 80.3 89.5

0.26 0.27 0.28 0.29 0.30 0.31 0.33

0.75 0.90 1.06 1.12 1.24 1.42 1.61

ASHRAE LBP 220V, 50Hz, 2 W PTC consumption incl., static cooling

Evap. temp. in °C

Capacity in W

Power cons. in W

Current cons. in A

COP in W/W

-45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

44.6 62.0 83.2 91.3 109 139 175

49.9 57.9 65.9 68.6 74.0 82.7 92.3

0.41 0.43 0.46 0.47 0.49 0.52 0.55

0.89 1.07 1.26 1.33 1.47 1.68 1.90

ASHRAE LBP 220V, 50Hz, RC 4µF, 2 W PTC consumption incl., static cooling

Evap. temp. in °C

Capacity in W

Power cons. in W

Current cons. in A

COP in W/W

-45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

44.6 62.0 83.2 91.3 109 139 175

48.6 56.3 63.9 66.5 71.7 79.9 89.1

0.26 0.27 0.28 0.29 0.30 0.31 0.33

0.92 1.10 1.30 1.37 1.52 1.74 1.97

Accessories TLY5.7KK.3 Figure Code number Test conditions EN 12900/CECOMAF ASHRAE

PTC starting device 6.3 mm spade connectors

ePTC starting device 4.8 mm spade connectors

Cover

Cord relief

Run capacitor 4 µF (optional)

Protection screen for PTC

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in speciﬁcations already agreed. All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

2/2 DEHC.ED.520.Y1.02 December 2005

4.8 mm spade connectors

6.3 mm spade connectors

4.8 mm spade connectors

(pos.1)

(pos.2)

b 103N2010

d 103N1010 Mounting accessories Code number

g 103N0476 Snap-on in quantities Ø: 16 mm 118-1919

103N0011 Condensing temperature 55°C 54.4°C

103N0018 Ambient temperature 32°C 32°C

103N0016 Suction gas temperature 32°C 32°C

103N0021 Liquid temperature no subcooling 32°C

103N0050

117-7117 Bolt joint for one compressor Ø: 16 mm 118-1917

117-7119 Bolt joint in quantities Ø: 16 mm 118-1918