Danfoss TLY4.8KK.3 Data sheet
TLY4.8KK.3
102H
4542
TLY4.8KK.3
R600a
SUCTION
CONNECTOR
8538
DANFOSS COMPRESSORS
Barcode on
white background
Yellow background
Red stripe
Approvals
Application
8122
R600a
Yellow warning label
157
66
60.5
102 96
117
29
71
51°
20°
45°
170
178
70
100
ø16
186
204
ø9
35
105
107
105
B
A
30°
31.5°
28°
176
222
C
D
E
8244
High Energy-optimized Compressor
R600a
220-240V 50Hz
General
Code number 102H4542
Approvals EN 60335-2-34 with Annex AA
Compressors on pallet 125
Application
Application LBP
Frequency Hz 50 60
Evaporating temperature °C -35 to -10 –
Voltage range V 198 - 254 –
Max. condensing temperature continuous (short) °C 60 (70) –
Max. winding temperature continuous (short) °C 125 (135) –
Cooling requirements
Frequency Hz 50 60
Application
32°C S – – – – –
38°C S – – – – –
43°C S – – – – –
Remarks on application:
Motor
Motor type RSIR/RSCR
LRA (rated after 4 sec. UL984), HST | LST A – 1.8
Cut in Current, HST | LST A – 6.1
Resistance, main | start winding (25°C) Ω 39.0 18.0
Design
Displacement cm
Oil quantity (type) cm
Maximum refrigerant charge g 150
Free gas volume in compressor cm
Weight without electrical equipment kg 6.8
Dimensions
Height mm A 163
Suction connector location/I.D. mm | angle C 6.2 | 30°
Process connector location/I.D. mm | angle D 6.2 | 31.5°
Discharge connector location/I.D. mm | angle E 5.0 | 28°
Oil cooler connector location/I.D. mm | angle F –
Connector tolerance I.D. mm ±0.09, on 5.0 +0.12/+0.20
Remarks:
December 2004 DEHC.ED.520.L1.02 1/2
LBP MBP HBP LBP MBP HBP
3
3
3
180 (mineral)
B 159
B1 –
B2 –
material | comment Cu-plated steel | Al caps
material | comment Cu-plated steel | Al caps
material | comment Cu-plated steel | Al caps
material | comment –
S = Static cooling normally sucient
O = Oil cooling
F1 = Fan cooling 1.5 m/s
(compressor compartment temperature
equal to ambient temperature)
F2 = Fan cooling 3.0 m/s necessary
SG = Suction gas cooling normally sucent
– = not applicable in this area
4.78
1690
EN 12900 Household (CECOMAF) 220V, 50Hz, 2 W PTC consumption incl., static cooling
8223
N
N
L
C
S
b
d
a1
e
a1
Winding protector
Start winding
Main winding
e
g
pos.2
8217
N
N
L
C
b
d
a1
a1
Winding protector
Start winding
Main winding
g
pos.1
Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20
Capacity in W 27.5 40.0 55.0 60.7 72.9 94.2 119
Power cons. in W 39.6 46.4 53.0 55.3 59.8 67.1 75.1
Current cons. in A 0.31 0.33 0.36 0.37 0.38 0.41 0.44
COP in W/W 0.70 0.86 1.04 1.10 1.22 1.40 1.59
EN 12900 Household (CECOMAF) 220V, 50Hz, RC 4µF, 2 W PTC consumption incl., static cooling
Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20
Capacity in W 27.5 40.0 55.0 60.7 72.9 94.2 119
Power cons. in W 38.8 45.5 52.0 54.2 58.7 65.8 73.6
Current cons. in A 0.21 0.22 0.24 0.25 0.26 0.28 0.31
COP in W/W 0.71 0.88 1.06 1.12 1.24 1.43 1.62
ASHRAE LBP 220V, 50Hz, 2 W PTC consumption incl., static cooling
Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20
Capacity in W 33.9 49.0 67.2 74.3 89.1 115 146
Power cons. in W 39.7 46.4 52.9 55.2 59.6 66.8 74.7
Current cons. in A 0.31 0.33 0.36 0.36 0.38 0.41 0.44
COP in W/W 0.85 1.06 1.27 1.35 1.49 1.72 1.95
ASHRAE LBP 220V, 50Hz, RC 4µF, 2 W PTC consumption incl., static cooling
Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20
Capacity in W 33.9 49.0 67.2 74.3 89.1 115 146
Power cons. in W 39.0 45.5 51.9 54.1 58.5 65.5 73.2
Current cons. in A 0.21 0.22 0.24 0.25 0.26 0.28 0.31
COP in W/W 0.87 1.08 1.30 1.37 1.52 1.76 1.99
Accessories TLY4.8KK.3 Figure Code number Test conditions EN 12900/CECOMAF ASHRAE
PTC starting device 6.3 mm spade connectors
PTC starting device 6.3 mm spade connectors
ePTC starting device 4.8 mm spade connectors 103N0050
Cover b 103N2010
Cord relief d 103N1010 Mounting accessories Code number
Run capacitor 4 µF
(optional)
Protection screen for PTC g 103N0476 Snap-on in quantities Ø: 16 mm 118-1919
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already
on order provided that such alterations can be made without subsequential changes being necessary in specications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
2/2 DEHC.ED.520.L1.02 December 2004
4.8 mm spade connectors 103N0018 Ambient temperature 32°C 32°C
4.8 mm spade connectors 103N0021 Liquid temperature no subcooling 32°C
6.3 mm spade connectors
4.8 mm spade connectors 117-7119 Bolt joint in quantities Ø: 16 mm 118-1918
a1
(pos.1)
a1
(pos.2)
e
103N0011 Condensing temperature 55°C 54.4°C
103N0016 Suction gas temperature 32°C 32°C
117-7117 Bolt joint for one compressor Ø : 16 mm 118-1917
Loading...