Danfoss SVP10-NCR Technical Information

Solenoid Valves Technical Information

2-Way Poppet

SVP10-NCR

OPERATION

This is a normally-closed, pilot-operated, poppet-type 10-size solenoid valve with free reverse flow. When de-energized, the valve acts as a check valve, allowing flow from port 1 to port 2, and blocking flow from port 2 to port 1. When energized, the valve’s poppet is shifted and allows flow from port 2 to port 1, and from port 1 to port 2. This valve is available with an optional pull-type manual override.

APPLICATIONS

This valve is designed for low leakage applications and can be used in a circuit with a single acting cylinder to control motion, provide load holding or as a general purpose diverter or dump valve. The SVP10-NCR

can operate at an inlet pressure of 315 bar on port 2 for 250,000 cycles. Shown with Standard Coil, Deutsch Connector

SPECIFICATIONS		SCHEMATIC
Rated pressure*	230 bar [3300 psi]**
Rated flow at 7 bar	80 l/min
[100 psi]	[21 US gal/min]
Leakage	6 drops/min @
	Rated pressure
Weight	0.43 kg [0.95 lb]
Cavity	SDC10-2
Standard Coil	M16 26 Watt

*Rated Pressure based on NFPA fatigue test standards (at 1 Million Cycles).

**See 315 bar pressure rating note on page 10.

PERFORMANCE CURVES

						Pressure drop
	33 cSt [154 SUS] hyd.oil @ 38°C [100° F]
psi	bar
261	18
218	15
174	12									1 to 2
								De-energized
131	9
87	6														2 to 1
												Energized
44	3
0	0
l/min	0		10		20		30			40		50			60		70
US gal/min			2.6		5.3		7.9			10.6		13.2			15.9		18.5
															P103 626E

2

1

BC332375861112en-000101 • February 2020

SV - 51

Solenoid Valves Technical Information

2-Way Poppet

SVP10-NCR

	DIMENSIONS	Cross-sectional view
	mm [in]
	24 mm
	9-11 N·m	27 mm	7/8-14 UNF-2A
	[6-8 lbf·ft]	45-50 N·m

Standard Coil Nut Kit P/N 17400021	[33-37 lbf·ft]
(Includes O-rings)

1

COIL NOT SHOWN FOR CLARITY

2

INSTALL O-RING (2) PLCS AS SHOWN

5.0 [0.20]

77.0 [3.03] 33.0 [1.30]

EXAMPLE CIRCUITS

ORDERING INFORMATION

BC332375861112en-000101 • February 2020

SV - 52