Solenoid Valves Technical Information
2-Way Poppet
SVP08-NCF
OPERATION
This is a normally-closed, pilot-operated, poppet-style 08-size solenoid
valve. When de-energized, the SPV08-NCF acts as a check valve, allowing
ow from port 1 to port 2, and blocking ow from port 2 to port 1. When
energized, the valve’s poppet is shifted and allows restricted ow through
the orice from port 2 to port 1. This valve is available with optional lter
and with pull-type manual override.
APPLICATIONS
The SVP08-NCF is designed to function as load holding or blocking valve
in applications where low internal leakage and various bleeding ows
are required in two dierent positions. In load holding applications, the
circuit should be designed so that the de-energized state is the position
that is holding the load. When it is energized, a load lowering function
will be achieved via a non-compensated orice. Example applications
include scissor & telescopic manlifts, which use a single-acting cylinder
for raising and lowering of the platform. The valve has an additional
(optional) threaded pull-type override for emergency lowering via a wire
cable or a knob handle.
SPECIFICATIONS SCHEMATIC
Rated pressure*
Rated ow at 7 bar
[100 psi]
Leakage
Weight 0.23 kg [0.51 lb]
Cavity SDC08-02
Standard Coil M13 20 Watt
Robust Coil
Robust Coil
* Rated Pressure based on NFPA fatigue test standards (at 1 Million Cycles).
230 bar [3300 psi]
16 l/min
[4.2 US gal/min]
6 drops/min @ Rated pressure
R13 16 Watt
Robust Nut P/N 173800539
(no coil O-rings needed)
R13 16 Watt
Robust Nut P/N 173800539
(No coil O-rings needed)
PERFORMANCE CURVES
BC332375861112en-000101 • February 2020
SV - 47
Solenoid Valves Technical Information
2-Way Poppet
SVP08-NCF
DIMENSIONS
EXAMPLE CIRCUITS
mm [in]
Cross-sectional view
Current vs new circuit schematics for
single-acting cylinder application.
SVP08-NCF replaces 3 valves, while
adding manual override and lter
options.
ORDERING INFORMATION
BC332375861112en-000101 • February 2020
SV - 48