Danfoss SVP08-NC Technical Information
Solenoid Valves Technical Information
US gal/min
Pressure drop
1
2
2-Way Poppet
SVP08-NC
OPERATION
This is a normally-closed, pilot-operated, poppet-style 08-size solenoid
valve. When de-energized, the SVP08-NC acts as a check valve allowing
ow from port 1 to port 2, and blocking ow from port 2 to port 1 .
When energized, the valve’s poppet is shifted and allows ow from port
2 to port 1, and severely restricts from port 1 to port 2. This valve is
available with an optional pull-type manual override.
APPLICATIONS
The SVP08-NC is designed to function as load holding or blocking valve
in applications where low internal leakage is required. In load holding
applications, the circuit should be designed so that the de-energized
state is the position that is holding the load. This valve can operate at
an inlet pressure of 315 bar on port 2 for 600,000 cycles.
Shown with Robust Coil,
Deutsch Connector
SPECIFICATIONS SCHEMATIC
Rated pressure* 230 bar [3300 psi]**
Maximum ow at
rated pressure
Leakage 6 drops/min @
Weight 0.23 kg [0.51 lb]
Cavity SDC08-2
Standard Coil M13 20 Watt
Robust Coil R13 16 Watt
* Rated Pressure based on NFPA fatigue test standards (at 1 Million Cycles).
** See 315 bar pressure rating note on page 10.
35 l/min
[9 US gal/min]
Rated pressure
Robust Nut P/N 173800539
(no coil O-rings needed)
PERFORMANCE CURVES
33 cSt [154 SUS] hyd.oil @ 38°C [100° F]
bar
psi
145 10
11 68
87 6
458
29 2
00
l/min
1to2
De-energized
2to1
Energized
2520151050
1.3 2.6 4 5.3 6.6 7.9
30
BC332375861112en-000101 • February 2020
SV - 29
Solenoid Valves Technical Information
Coil, with nut*
2-Way Poppet
SVP08-NC
DIMENSIONS
mm [in]
EXAMPLE CIRCUITS
Cross-sectional view
On/O Motor Circuit
ORDERING INFORMATION
NC
Robust Coil
Code
12D-
SVP08
Solenoid Valve, Poppet
Type, 08 Size Cavity
NC:
Normally Closed, Pull Type
Coil Voltage Standard Coil
No
10 VDC
12 VDC
20 VDC
24 VDC
110 VAC**
220 VAC**
* Standard coil – plastic nut and O-rings; R-coil – steel nut
P/N 173800539 (no coil O-rings needed)
** DIN only - external rectifier needed
-
Code
00 R00
10D R10D
12D R12D
20D R20D
24D R24D
110A -
220A -
BC332375861112en-000101 • February 2020
-
AMP SuperSeal with Diode
Metri-Pack 150 with Diode - - M3DB IP69K
-
-
M
B
Coil Termination Standard Coil
No Coil
Amp Junior
Amp Junior with Diode
AMP SuperSeal 1.5
Deutsch
Deutsch with Diode
Flying Leads
Flying Leads with Diode
DIN 43650
Metri-Pack 150 Type 2
-
- 00DE
F
Filter:
No Filter Omit
Filter 300 mµ F
Code
00 - 00 AJ IP67 -
AJD IP67 -
AS IP67 AS IP69K
ASD IP67 ASDB IP69K
DE IP67 DE IP69K
DED IP67 DEDB IP69K
FL IP65 FL IP69K
FLD IP65 FLDB IP69K
DN IP65 - -
- - M3 IP69K
IP Rating Robust Coil
Code
Code Body and Ports Body Nomenclature
00 Cartridge Only No Body
4S #4 SAE, AL CP08-2-4S
6S #6 SAE, AL CP08-2-6S
S6S #6 SAE, Steel CP08- 2-S6S
DG2B 1/4 BSP, AL SDC08-2-DG2B
DG3B 3/8 BSP, AL SDC08-2-DG3B
S3B 3/8 BSP, Steel CP08-2-S3B
Seal Code Material Seal Kits
B Buna-N 354000119
V Viton 354000219
Code Manual Override
IP Rating
Omit No Override
M Pull Screw
SV - 30
Loading...