Danfoss LCP 11, LCP 12, LCP 21 Installation guide
Installation Instructions
MI02C202 - VLTp is a registered Danfoss trademark
VLTp LCP Remote Mounting Kit
IP55 rated remote mounting kit for mounting of VLTp Control
Panel of type LCP 11, LCP 12 and LCP 21.
Items supplied
Sealing gasket
•
Mounting bracket
•
Mounting screws
•
Cable (3 m)
•
Mounting
1. Fit the sealing gasket on the LCP.
Illustration 1.3 Example: LCP on Mounting Plate
Illustration 1.1 Example: Gasket on LCP
2. Cut out section of panel and locate the LCP in the
cut-out.
1Mounting plate
2Gasket
3LCP
Table 1.2 Legend to Illustration 1.3
3. Slide the mounting bracket into place on the
backside of the LCP and fasten it with screws.
Illustration 1.4 Mounting Bracket on LCP
Illustration 1.2 Dimensions
1Panel cut out
Panel thickness: 1-3 mm
Table 1.1 Legend to Illustration 1.2
1
4. Connect the cable to LCP and fasten it with the
provided thread cutting screws. Tightening torque
1.3 Nm.
Illustration 1.5 Cable Fastening
MI02C202132R0010 Rev. 2013-01-24
*MI02C202*
Loading...