Fact Sheet
VLT® Wireless Communication Panel LCP 103
Wireless connectivity to your drive
The new VLT® Wireless Communication Panel LCP 103 provides wireless communication capabilities to the following drives:
VLT® HVAC Drive FC 102VLT® Refrigeration Drive FC 103VLT® AQUA Drive FC 202VLT® AutomationDrive
FC 301/FC 302VLT® Lift Drive LD 302
The VLT® Wireless Communication Panel LCP 103 communicates with MyDrive® Connect – an app which can be downloaded to iOSand
Android-based smart devices. MyDrive® Connect offers full access to the
drive making it easier to perform commissioning, operation, monitoring and maintenance tasks.
The VLT® Wireless Communication Panel LCP 103 displays the current drive status (On, Warning, Alarm, Wi-Fi Connectivity) through built-in LEDs. Detailed information is then accessible from your smart devices utilizing MyDrive® Connect. There, status messages, start-up menus and
alarm/warning events can be accessed. Additionally, data can be visualized using graphs documenting the behavior of a drive over time. Utilizing the active point-to-point wireless connection, maintenance personnel can receive real-time error messages via the app to ensure a quick response to potential issues and reduce downtime.
Copies of the drive parameters can be stored, either to the internal memory of the VLT® Wireless Communication Panel LCP 103 or to your smart device using the advanced LCP copy function. Log details can be shared from MyDrive® Connect, so that the service team can provide relevant support
for troubleshooting. The safe control parameter allows the user to decide the drive behavior in case of crash/ connection-loss from app to drive.
Wireless connectivity
Easy commissioning with smart devices
Compatible software versions
FC-30x: 8.03FC-202: 3.10FC-102: 5.10FC-103: 2.10
Feature
Full access to the drive Real-time error messages
PUSH notifications for alarms/warnings Safe and secure WPA2 encryption Intuitive parameter functionalities
Live graphs for monitoring and fine tuning Multi-language support
Upload or download parameter file to the built-in memory or to your smartphone
Benefit
Easy commissioning, operation and maintenance Faster maintenance actions, reduced downtime Smarter troubleshooting
Ease of use and reduced complexity High performance with rich user interface Easy identification of connected drive Enhanced user experience
Easy commissioning and maintenance
drives.danfoss.com
Specifications
Standards |
|
|
IEEE 802.11 b/g |
|||
Frequency range |
|
|
2.4~2.4835 Ghz |
|||
Antenna type |
|
|
PCB mounted chip antenna |
|||
Security |
|
|
WPA2 (AES) Safe and Secure encryption |
|||
LEDs |
|
|
Drive power, alarm, warning, |
|||
|
|
Wi-Fi and fieldbus status |
||||
|
|
|
|
|||
Operating temperature |
|
|
-25 °C to +50 °C (-13 °F to +122 °F) |
|||
Operating humidity |
|
|
5% to 95% RH, non-condensing |
|||
Operating mode |
|
|
Access point |
|||
Ingress protection (IP) |
|
|
IP-20, (IP-55 with gasket) |
|||
Electrical rating |
|
|
5 V, 250 mA |
|||
Internal memory size |
|
|
14 MB |
|||
Firmware update |
|
|
MCT 10 |
|||
|
|
|
|
VLT® HVAC Drive FC 102 |
||
|
|
|
|
VLT® Refrigeration Drive FC 103 |
||
Compatibility |
|
|
VLT® AQUA Drive FC 202 |
|||
|
|
|
|
VLT® AutomationDrive FC 301/FC 302 |
||
|
|
|
|
VLT® Lift Drive LD 302 |
||
Memory limit |
|
|
Max 50 files |
|||
Range |
|
|
Open air 150 m/Steel wall 30 m |
|||
Dimensions (L x W x D) |
|
|
131.5 x 66.6 x 23 mm (5.1 x 2.6 x 0.9 in.) |
|||
Weight |
|
|
85.3 g |
|||
Approval and certification |
|
|
CE, FCC ID: 2ANSELCP-103 |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MyDrive® Connect
|
Mounted |
Wi-Fi |
|
|
on the drive |
|
|
AC drive |
VLT® Wireless Communication Panel LCP 103 |
Mobile device |
Simply connected!
<![endif]>EtherNet/IP™ and DeviceNet™ are trademarks of ODVA, Inc.
DKDD.PFP.412.A4.02 |
© Copyright Danfoss Drives | 2018.04 |