Data Sheet
Fan Drive Motor
Ultra Compact Reversing/Proportional Motor
Danfoss has built up a wealth of experience with electrohydraulic Fan Drive systems. Vehicle designers require compact and integrated solutions for flexible mounting of the cooling system.
The Fan Drive Motor provides proportional speed control with reversing capability in an ultra-compact package size.
The Ultra Compact Reversing/Proportional Fan Drive Motor is designed for fan drive systems requiring proportional speed control with reversing capability in an ultra-compact package size.
•Unique design minimizes axial length
•Cartridge valves optimized for fan drive applications minimize pressure drop and offer greater power savings
•Pressure capability up to 210 bar (3045 PSI)
•Speeds up to 3500 rpm
•Intermittent fluid temperature up to 110°C [230°F] with a minimum viscosity of 10 mm2/s [60 SUS]
Features
•High performance, pressure balanced aluminum gear motor
•Integrated dust cover to protect the shaft seal
•Durable aluminum casting optimized to provide short length and minimize weight
•Proportional pressure relief valve to modulate fan speed
•Direct acting cartridge valve to reverse motor rotation
•Anti-cavitation vales to bypass flow during fan wind down
•DEUTSCH connector DT 04 (IP69K) and optional DIN 43650 connector
•PLUS+1® Compliant
Comprehensive technical literature is online at www.danfoss.com
© Danfoss | October 2019 |
AI319479020494en-000101 | 1 |
Technical specifications
Parameters |
Unit |
8.0 |
011 |
014 |
017 |
019 |
022 |
025 |
Displacement |
cm3/rev |
8.4 |
10.8 |
14.4 |
16.8 |
19.2 |
22.8 |
25.2 |
|
in3/rev |
0.51 |
0.66 |
0.88 |
1.03 |
1.17 |
1.39 |
1.54 |
Rated Pressure |
bar |
210 |
210 |
210 |
210 |
210 |
180 |
160 |
|
|
|
|
|
|
|
|
|
|
psi |
3046 |
3046 |
3046 |
3046 |
3046 |
2610 |
2320 |
|
|
|
|
|
|
|
|
|
Peak Pressure |
bar |
230 |
230 |
230 |
230 |
230 |
200 |
180 |
|
|
|
|
|
|
|
|
|
|
psi |
3336 |
3336 |
3336 |
3336 |
3336 |
2900 |
2610 |
|
|
|
|
|
|
|
|
|
Maximum Speed |
rpm |
3500 |
3500 |
3500 |
3500 |
3200 |
3200 |
3200 |
|
|
|
|
|
|
|
|
|
Dimension “A” |
mm |
76 |
80 |
86 |
90 |
94 |
100 |
104 |
|
|
|
|
|
|
|
|
|
Schematic
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequent changes being necessary in specifications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
2 | © Danfoss | October 2019 |
AI319479020494en-000101 |