Danfoss ECtemp 610 Data sheet

Data Sheet

ECtemp 610

The ECtemp 610 is an electronic IP 44, 10 Amps thermostat, suitable for many
different purposes both indoor and outdoor applications. It is provided with a
2-pole switch and a wire sensor to control the desired temperature.

The thermostat has a button for adjusting the temperature setting with a scale from

-10° to +50°C, and a LED indicating the current mode (heating, standby or fault).

It is water resistant and can be mounted on any plain surface indoor or outdoor.

YEAR

WARRANTY

Product

Product specifications

Benefits

• ON/OFF switch

• Terminals for NO/NC connection

• LED indicator

• Mounts directly onto plain surfaces

• Low energy consumption

• IP44

Approvals:

Standard compliance

• EN/IEC 60730-1 (general)

• EN/IEC 60730-2-9 (thermostat)

Operation voltage 220 V- 240 V~, 50/60 Hz

Standby power consumption max. 0.93 W

Relay:
Resistive load
Inductive load

Sensing unit NTC 15 kOhm at 25°C

Hysteresis ± 0.2°C

Ambient temperature -30°C. to +55°C

Temperature range -10°C to +50°C

Cable specification max 1 x 4 mm2 or 2 x 2,5 mm

Ball pressure test temperature 75°C

Pollution degree 2 (domestic use)

Controller type 1 C

Storage temperature -20°C to +65°C

IP class IP 44

Protection class

Dimensions (H/W/D) 100 mm x 69.5 mm x 45 mm

Weight 165 g

Max 10A / 2300W @ 230V
Cos Φ = 0.3 max. 1A

2

Class II -

Types

Item no. Product name Typ e EAN no.

088L0448 ECtemp 610 Temp. range -10°C/+50°C incl. wire sensors 5703466130384

Connection scheme

IMPORTANT: When the
thermostat is used to control
a floor heating element in
connection with a wooden
floor or similar material,
always use a floor sensor and
never set the maximum floor
temperature to more than 35°C.

220-240 V~

PE

LNNNONCNTC

L

N

Load
max. 10 A

(heating)

–10...+50 °C

t°

NTC
15 kOhm/25

AI239086497832en-010103Electrical heating · ©Danfoss

°C