Danfoss BB, BE, BF, BG, BN Data sheet

Data Sheet

Solenoid coil Type BB, BE, BF, BG and BN

The Clip-on coils are available for the entire range of Danfoss solenoid valves

The coils are specially designed to operate in the aggressive environment of high humidity and temperature uctuations that you nd in most refrigeration systems.

The Clip-on fastening system ensures a faultless installation and makes the coils easy to mount and dismount. A Danfoss Clip-on coil can be mounted without any tools at all, and it is simple to dismount the coil by means of a screwdriver.

The Clip-on coils are available for the entire range of Danfoss solenoid valves for refrigeration, freezing and air conditioning purposes.

Features

• Encapsulated coils with long operating life, even under extreme conditions.

• Standard coils for AC or DC.

• Standard coils available with 3-core cable, terminal box or DIN plugs.

• Standard coils from 12 V to 420 V, 50, 60 or 50/60 Hz.

• Standard coils dimensioned for max. opening dierential pressure (MOPD) of up to 38 bar.

• Coils can be tted without the use of tools.

AI237186440089en-000802

Data

Solenoid coil type

1m 3-core

cable

Terminal box

DIN spade

and

protection

cap

DIN spade

1m 3-core

cable

Terminal

box

DIN spade

and

protection

cap

DIN spade

Terminal box IP67

BFBEBGBGBEBBBFBEBEBBBN

Enclosure

IP67

IP20

IP00

IP67

IP20

IP00

IP67

Polution degree

44443344333

Conductor area [mm2]

0.75

0.75 - 1.5

0.75

0.75 - 1.5

Cable size [mm]

Ø6.6

Ø6.0 - Ø11

Ø6.6

Ø6.0 - Ø11

Rated impulse voltage [kV], if altitude < 4000 m

44444444444

Humidity [R.H.]

0 − 100%

0 − 97%

non-condensation condition

0 − 97%

non-condensation condition

0 − 100%

0 − 97%

non-condensation condition

0 − 97%

non-condensation condition

0 − 100%

Type of control

11111111111

Safety clas-

sication

Class I

Max. altitude above sea level [m]

4000

Solenoid coil, Type BB, BE, BF, BG, and BN

Product specication

Technical data

Table 1: Solenoid coil type

 NOTE:

For DIN plug, impulse withstand voltage is 3.1 kV for 2000 m < Altitude < 4000 m

Connection

3-core cable

The external thread in the screwed cable entry suits exible steel hose or corresponding cable protection (3 x 0.75 mm2).

Terminal box

Leads are connected to terminal screws in the terminal box. The box is tted with a Pg 13.5 screwed entry for 6 - 14 mm cable. Max. lead cross section: 2.5 mm2.

DIN plugs

The three pins on the coil can be tted with spade tabs, 6.3 mm wide (to EN175301-803A). The two current carrying pins can also be tted with spade tabs, 4.8 mm wide. Max. lead cross section: 1.5 mm2. Use of the protective cap supplied will prevent inadvertent contact with live parts.

DIN socket

(to EN175301-803A) Leads are connected in the socket. The socket is tted with a Pg 11 screwed entry for 6 - 12 mm.

94

Danfoss M18F03

45

57

47

71

57

45

46

86

51

45

57

47

28

110

45

57

68

Solenoid coil, Type BB, BE, BF, BG, and BN

Dimension and weight

Figure 1: Terminal box 10 W , Weight 0.29 Kg

Figure 2: Cable 10 W , Weight 0.29 Kg

Figure 3: DIN socket 10 W , Weight 0.24 Kg

Figure 4: Terminal box 12 - 20 W , Weight 0.55 Kg

Type

Valve type

Tambient

[°C]

Supply voltage

[V]

Voltage

variation

Frequency

[Hz]

Power consumption

Code no.

[W]

[VA]

BF024AS

EVR 2 – EVR 40

(NC)

EVR 6 – EVR 22

(NO)

EVRH 10 – EVR

40 EVRC EVRA

EVRAT

EVRS / EVRST

EVM (NC)

-40T80

24

-15%, +10%

501220

018F6257

BF230AS

-40T80

230

-15%, +10%

501222

018F6251

-40T80

220

-15%, +10%

501120

BF240AS

-40T80

240

-15%, +10%

501119

018F6252

BF400AS

-40T80

380 / 400

±10%501021018F6253

BF024BS

-40T80

24

-15%, +10%

601425

018F6265

BF115CS

-40T80

115

-15%, +10%

601322

018F6260

-40T80

100

-15%, +10%

501119

BF220BS

-40T80

220

-15%, +10%

601423

018F6264

BF110CS

-40T50 110

±10%5015

29

018F6280

110

±10%6013

23

BF230CS

-40T50

220 – 230

±10%5016

31

018F6282

220 - 230

±10%6014

24

Solenoid coil, Type BB, BE, BF, BG, and BN

Ordering

Figure 5: BF solenoid coil with 1m 3-core cable IP67

Table 2: Ordering for BF solenoid coil with 1m 3-core cable IP67

Figure 6: BE solenoid coil with terminal box IP67

Type

Valve type

Tambient

[°C]

Supply voltage

[V]

Voltage

variation

Frequency

[Hz]

Power consumption

Code no.

[W]

[VA]

BE012AS

EVR 2 – EVR 40

(NC)

EVR 6 – EVR 22

(NO)

EVRH 10 – EVRH

40 EVRC EVRA

EVRAT

EVRS / EVRST

EVM (NC)

-40T80

12

-15%, +10%

501018

018F6706

BE024AS

-40T80

24

-15%, +10%

501221

018F6707

BE042AS

-40T80

42

-15%, +10%

501021

018F6708

BE048AS

-40T80

48

-15%, +10%

501021

018F6709

BE115AS

-40T80

115

-15%, +10%

501119

018F6711

BE230AS

-40T80

230

-15%, +10%

501222

018F6701

-40T80

220

-15%, +10%

501119

BE240AS

-40T80

240

-15%, +10%

501119

018F6702

BE440CS

-40T80

380 – 400

-15%, +10%

501323

018F6703

440

-15%, +10%

601424

BE440AS

-40T80

420

-15%, +10%

501121

018F6704

BE024BS

-40T80

24

-15%, +10%

601425

018F6715

BE115CS

-40T80 100

-15%, +10%

501119

018F6710

115

-15%, +10%

601322

BE220BS

-40T80

220

-15%, +10%

601323

018F6714

BE240CS

-40T80

200

-15%, +10%

501120

018F6713

-40T80

240

-15%, +10%

601525

BE110CS

-40T50

110

±10%5015

28

018F6730

-40T50

110

±10%6013

22

BE230CS

-40T50

220 - 230

±10%5017

31

018F6732

220 - 230

±10%6014

24

Type

Valve type

Tambient

[°C]

Supply

voltage

[V]

Voltage

variation

Frequency

[Hz] Power consumption

Code no.

[W]

[VA]

BG024AS

EVR 3 – EVR 40

EVRC EVRA

EVRAT

EVRS/EVRST

EVM (NC/NO)

-40T80

24

-15%, +10%

501121

018F6807

BG048AS

-40T80

48

-15%, +10%

501226

018F6809

BG110AS

-40T80

110

-15%, +10%

501325

018F6811

BG230AS

-40T80

230

-15%, +10%

501528

018F6801

-40T80

220

-15%, +10%

501325

BG240AS

-40T80

240

-15%, +10%

501325

018F6802

BG400AS

-40T80

380 / 400

-15%, +10%

501226

018F6803

BG024BS

-40T80

24

-15%, +10%

601226

018F6815

BG110BS

-40T80

110

-15%, +10%

601629

018F6813

BG220BS

-40T80

220

-15%, +10%

601629

018F6814

Solenoid coil, Type BB, BE, BF, BG, and BN

Table 3: Ordering for BE solenoid coil with terminal box IP67

 NOTE:

See „Opening dierential pressure“ under „Technical data“ for the valve concerned. When replacing a coil with terminal box, it is sucient to change the coil unit itself. Therefore, order coil with DIN plugs and protective cap.

Figure 7: BG solenoid coil with terminal box IP67

Table 4: Ordering for BG solenoid coil with terminal box IP67

Type

Valve type

Tambient

[°C]

Supply

voltage

[V]

Voltage

variation

Frequency

[Hz] Power consumption

Code no.

[W]

[VA]

BG012DS

EVR 2 – 8

EVR 25 – 40

EVRA 3 – EVRA 15 (NC)

EVRA 25 – EVRA 40 (NC)

EVRAT 10 – EVRAT 15 (NC)

EVRS/EVRST 3 –

EVRS/EVRST 15

EVM (NC/NO)

-40T5012±10%DC20–018F6856

BG024DS

-40T5024±10%DC16–018F6857

BG048DS

-40T5048±10%DC20–018F6859

BG110DS

-40T50

110

±10%DC16–018F6860

BG115DS

-40T50

115

±10%DC19–018F6861

BG220DS

-40T50

220

±10%DC20–018F6851

BG012DS

EVR 10 – 22

EVRC 15 – 20

EVRC 20

EVRA 20 EVRAT 20 EVRST 20

-40T5012±10%DC20–018F6886

BG024DS

-40T5024±10%DC20–018F6887

BG048DS

-40T5048±10%DC20–018F6889

BG110DS

-40T50

110

±10%DC20–018F6890

BG220DS

-40T50

220

±10%DC20–018F6881

Type

Valve type

Tambient

[°C]

Supply voltage

[V]

Voltage varia‐

tion

Frequency

[Hz]

Power consumption

Code no.

[W]

[VA]

BE024AS

EVR 2 – EVR 40

(NC)

EVR 6 – EVR 22

(NO)

EVRH 10 – EVRH

40 EVRC EVRA

EVRAT

EVRS/EVRST

EVM (NC)

-40T80

24

-15%, +10%

501221

018F6182

BE230AS

-40T80

230

-15%, +10%

501222

018F6176

-40T80

220

-15%, +10%

501119

BE240AS

-40T80

240

-15%, +10%

501119

018F6177

BE420AS

-40T80

420

-15%, +10%

501021

018F6179

BE115CS

-40T80

100

-15%, +10%

501119

018F6185

-40T80

115

-15%, +10%

601322

BE220BS

-40T80

220

-15%, +10%

501323

018F6189

BE110CS

-40T50

110

±10%5015

28

018F6192

-40T50

110

±10%6013

22

BE230CS

-40T50

220-230

±10%5017

31

018F6193

-40T50

220-230

±10%6014

24

Solenoid coil, Type BB, BE, BF, BG, and BN

NOTE:



See „Opening dierential pressure“ under „Technical data“ for the valve concerned. When replacing a coil with terminal box, it is sucient to change the coil unit itself. Therefore, order coil with DIN plugs and protective cap.

Figure 8: BE solenoid coil with DIN spade and protection cap IP20

Table 5: Ordering for BE solenoid coil with DIN spade and protection cap IP20

Type

Valve type

Tambient

[°C]

Supply voltage

[V]

Voltage varia‐

tion

Frequency

[Hz]

Power consumption

Code no.

[W]

[VA]

BB024AS

EVR 2 – EVR 40

(NC)

EVR 6 – EVR 22

(NO)

EVRH 10 – EVRH

40 EVRC EVRA

EVRAT

EVRS/EVRST

EVM (NC)

-40T80

24

-15%, +10%

501119

018F7358

BB115AS

-40T80

115

-15%, +10%

501119

018F7361

BB230AS

-40T80

220 - 230

-15%, +10%

501119

018F7351

BB240AS

-40T80

240

-15%, +10%

501119

018F7352

BB024BS

-40T80

24

-15%, +10%

601423

018F7365

BB110CS

-40T50 110

±10%5015

28

018F7360

110

±10%6013

22

BB230CS

-40T50

220 - 230

±10%5016

31

018F7363

220 - 230

±10%6013

24

Type

Valve type

Tambient

[°C]

Supply voltage

[V]

Voltage varia‐

tion

Frequency

[Hz]

Power consumption

Code no.

(1)

)

[W]

[VA]

BN024AS

EVR 2 – EVR 40

(NC)

EVR 6 – EVR 22

(NO)

EVRH 4 – EVRH

40

EVRC/EVRA/

EVRAT/

EVRS/

EVRST/EVM (NC)

-40T50

24

-15%, +10%

502449

018F6904

BN024BS

-40T50

24

-15%, +10%

602242

018F6906

BN230AS

-40T50

230

-15%, +10%

501943

018F6905

Solenoid coil, Type BB, BE, BF, BG, and BN

Figure 9: BB solenoid coil with DIN spade*)

Table 6: Ordering for BB solenoid coil with DIN spade*)

*) Can only be used with DIN plug

 NOTE:

See „Opening dierential pressure“ under „Technical data“ for the valve concerned. When replacing a coil with terminal box, it is sucient to change the coil unit itself. Therefore, order coil with DIN plugs and protective cap.

Figure 10: BN special solenoid coil with terminal box IP67

Table 7: Ordering for BN special solenoid coil with terminal box IP67

Type

Description

Code no.

Terminal box

With built-in light emitting indicator diode for solenoid valves

018Z0089 DIN plug

Enclosure IP65, EN 175301-803A

042N0156

Solenoid coil, Type BB, BE, BF, BG, and BN

(1)

Recommended use for EVRH with high MOPD (38 bar).

Figure 11: Coil with DIN plug

Table 8: Ordering for Coil with DIN plug

Document name

Document type

Document topic

Approval authority

RMRS 19.10034.262

Marine - Safety Certicate

-

RMRS

Solenoid coil, Type BB, BE, BF, BG, and BN

Certicates and declaration

The list contains all certicates, declarations, and approvals for this product type. Individual code number may have some or all of these approvals, and certain local approvals may not appear on the list.

Some approvals may change over time. You can check the most current status at danfoss.com or contact your local Danfoss representative if you have any questions.

Table 9: Certicates, declarations, and approvals

Online support

Danfoss oers a wide range of support along with our products, including digital product information, software, mobile apps, and expert guidance. See the possibilities below.

The Danfoss Product Store

The Danfoss Product Store is your one-stop shop for everything product related—no matter where you are in the world or what area of the cooling industry you work in. Get quick access to essential information like product specs, code numbers, technical documentation, certications, accessories, and more. Start browsing at store.danfoss.com.

Find technical documentation

Find the technical documentation you need to get your project up and running. Get direct access to our ocial collection of data sheets, certicates and declarations, manuals and guides, 3D models and drawings, case stories, brochures, and much more.

Start searching now at www.danfoss.com/en/service-and-support/documentation.

Danfoss Learning

Danfoss Learning is a free online learning platform. It features courses and materials specically designed to help engineers, installers, service technicians, and wholesalers better understand the products, applications, industry topics, and trends that will help you do your job better.

Create your Danfoss Learning account for free at www.danfoss.com/en/service-and-support/learning.

Get local information and support

Local Danfoss websites are the main sources for help and information about our company and products. Find product availability, get the latest regional news, or connect with a nearby expert—all in your own language.

Find your local Danfoss website here: www.danfoss.com/en/choose-region.

Any information, including, but not limited to information on selection of product, its application or use, product design, weight, dimensions, capacity or any other technical data in product manuals, catalogues descriptions, advertisements, etc. and whether made available in writing, orally, electronically, online or via download, shall be considered informative, and is only binding if and to the extent, explicit reference is made in a quotation or order conrmation. Danfoss cannot accept any responsibility for possible errors in catalogues, brochures, videos and other material. Danfoss reserves the right to alter its products without notice. This also applies to products ordered but not delivered provided that such alterations can be made without changes to form, t or function of the product. All trademarks in this material are property of Danfoss A/S or Danfoss group companies. Danfoss and the Danfoss logo are trademarks of Danfoss A/S. All rights reserved.

Danfoss BB, BE, BF, BG, BN Data sheet

Specifications and Main Features

Frequently Asked Questions

User Manual