Danfoss 013G8072 Installation guide

Instructions 013G8072

RAV to RA2000 Operator Adapter

RAV to RA 2000:

In order to use current RA 2000 operators on existing systems with Danfoss RAV valves, the

adapter 013G8072 must be installed to allow the new operator to t onto the valve.

The Danfoss RAV operator is distinguished by the metal

band connecting the operator to the valve.

Metal Band

Crossover Replacement Operator Guide, RAV to RA2000

Built-in dial and

sensor

013G8250

Tamper resistant

Built-in dial and

sensor

013G8240

013U8200 RAV

013U1100 RAVN

013G8072

Adapter

Installation:

013G8072

013U8202 RAV

013U1102 RAVN

If replacing RAV valve mounted operator with an RA 2000 “Wall Mount” operator (013G8562,

013G8565, 013G8568 or 013G8564) this adapter IS NOT REQUIRED.

Adapter

Allen Screw

Built-in dial and

remote sensor

013G8252

1. With a at head screw driver loosen the

screw of the metal band at the base of the RAV operator to remove the thermostatic operator

from the valve body.

Tamper resistant

Built-in dial with

remote sensor

013G2922

VIUHB222 © Danfoss 08/16

Instructions 013G8072

RAV to RA2000 Operator Adapter

Installation (Cont.):

Allen Screw

013G8250 013G8252

013G8240 013G2922

3. Place adapter over the valve’s shoulder as

shown.

4. Complete the mounting of the adapter and

tighten the Allen screw.

5a. For 013G8250 & 013G8252

Align the base of the RA2000 operator with the

notches on the adapter. Press rmly until an audible “click” is heard.

5b. For 013G8240 & 013G2922

For tamper resistant operators 013G2922 and

013G8240 the Allen screw on the operator

must be tightened to secure to the valve.

Operation Instructions:

Danfoss can accept no responsibility for possible errors in printed materials and reserves the right to alter its products without notice. All trademarks in this material are property of the respective companies. Danfoss and Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

For complete details of the installation of the operator, please consult instructions enclosed with applicable operator.

Danfoss Heating Segment

6711 Mississauga Road, Suite 306 Mississauga, ON, L5N 2W3

Tel.: 866-375-4822, Fax: 416-352-5981 www.heating.danfoss.us

Danfoss Heating Segment

11655 Crossroads Circle Baltimore, MD 21220 USA

Tel.: 866-375-4822, Fax: 416-352-5981 www.heating.danfoss.us