Danby DKC445BL User Manual
Model • Modèle• Modelo
DKC445BL
For service, contact your nearest
service depot or call:
1-800-26- Danby
(1-800-263-2629)
to recommend a depot in
your area.
En cas de réparation, veuillez
contacter votre service
après-vente le plus près ou
communiquez au:
1-800-26- Danby
(1-800-263-2629)
pour connaître le service
après-vente le plus proche.
Keg Cooler
The model number can be found on the serial plate located on the
back panel of the unit.
All repair parts available for purchase or special order when you
visit your nearest service depot. To request service and/or the
location of the service depot nearest you, call the TOLL FREE
NUMBER.
When requesting service or ordering parts, always provide the
following information:
• Product Type
• Model Number
• Part Description
Glacière de bière en fût
Le numéro du modèle se trouve sur la plaque d'identification située
sur le panneau arrière de l'appareil.
Il est possible d'acheter les pièces de rechange ou de les obtenir par
commande spéciale en vous rendant à votre service après-vente le
plus proche. Pour effectuer des réparations ou obtenir l'adresse du
service après-vente le plus proche, veuillez composer le NUMÉRO
SANS FRAIS.
Pour effectuer des réparations ou commander des pièces de
rechange, veuillez donner les renseignements suivants :
• Type de modèle
• Numéro du modèle
• Description des pièces
Para obtener servicio,
comuníquese con el
establecimiento de servicio
más cercano o llame al:
1-800-26- Danby
(1-800-263-2629)
para que le recomendemos un
establecimiento de su zona..
Printed in China (P.R.C.)
Barril refrigerador
El número de modelo se encuentra en la placa de serie, ubicada en
el tablero posterior de la unidad.
Puede comprar todos los repuestos o hacer un pedido especial
visitando el establecimiento de servicio más cercano a su domicilio.
Llame al TELÉFONO GRATUITO para obtener servicio de
mantenimiento o la dirección del establecimiento de servicio más
cercano a su domicilio.
Siempre, al solicitar servicio de mantenimiento o hacer un pedido de
repuestos, debe suministrar la siguiente información:
• Tipo de artefacto
• Número de modelo
• Descripción del repuesto
Danby Products Limited, Guelph, Ontario Canada N1H 6Z9
Danby Products Inc., Findlay, Ohio USA 45840
OWNER’S MANUAL
MANUEL
D'UTILISATION
MANUAL DEL
PROPIETARIO
Model • Modèle• Modelo
DKC445BL
CAUTION:
Read and follow all safety rules
and operating instructions
before first use of this product.
PRÉCAUTION:
Veuillez lire attentivement les
consignes de sécurité et les
instructions d'utilisation avant
l'utilisation initiale de ce
produit.
PRECAUCIÓN:
Lea y observe todas las
reglas de seguridad y las
instrucciones de operación
antes de usar este producto
por primera vez.
Danby Products Limited, Guelph, Ontario Canada N1H 6Z9
Danby Products Inc., Findlay, Ohio USA 45840
Keg Cooler
Owners Manual
Glacière de bière en fût
Guide d'utilisation
Barril Refrigerador
Manual del propietario
DKC445BL.11.00.
TABLE OF CONTENTS
Before putting appliance into use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
We care for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Tips for energy savings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Disposal of worn out appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Instructions for setting up the Chill ‘n Tap Keg Cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Chill ‘n Tap Keg cooler accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
“Warning” CO2 can be dangerous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Chill ‘n Tap assembly instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
How to replace and empty CO2 cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Setting the refrigerator temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Helpful hints on setting the refrigerator temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Cleaning and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Changing the direction of the door opening (swing) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Helpful hints to assist you in serving the perfect glass of cold beer . . . . . . . . . . . . . . . . . . . . . .10
Keg sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Dispensing beer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Cleaning beer lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Converting the Chill ‘n Tap Keg Cooler to a basic “All Refrigerator” . . . . . . . . . . . . . . . . . . . . . .12
Optional accessories available for Keg Cooler and/or All Refrigerator . . . . . . . . . . . . . . . . . . . .12
Additional information on CO2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
INTRODUCTION
Thank you for buying a Danby Millennium appliance. This unique appliance is designed to offer you two
separate functions. The primary function of this appliance is that of a "Chill'n Tap" Draft Beer Dispensing
unit. When this unit is not being used as a Draft Beer Dispensing unit, it's secondary function allows for
fast and easy conversion to a compact "All Refrigerator" application. This refrigerator is for domestic use
only and is intended for storing fresh foods at temperatures higher than 32ºF / 0ºC
Model Number: ___________________________ Serial Number: ______________________________
Date of Purchase: ________________________________________________________________________
Dealer’s Name and Address: _______________________________________________________________
This information will be required if your unit requires servicing and/or for general inquiries. To contact a
Customer Service Representative, call Danby TOLL FREE.
CAREFULLY READ AND SAVE THESE INSTRUCTIONS
These instructions for use are intended for the user. They describe the appliance and correct installation and
operating procedures for safe use.
IMPORTANT NOTICE:
Beer is easily available with Danby's new Keg Cooler Refrigerator, however, it is not intended to be available
to people under the legal age to consume beer. One of the options Danby offers is a lock so that access to
the ice cold beer can be limited. Danby does not assume liability for the unlawful use or consumption of the
beer. DON'T DRINK AND DRIVE!
NOTE:
This appliance was carefully packed and thoroughly inspected before leaving our factory. Responsibility for its
safe delivery was assumed by the carrier upon acceptance of the shipment. Claims for loss or damage sustained during transit must be made directly to the carrier.
1-800-26-Danby
1
BEFORE PUTTING APPLIANCE INTO USE
• Before connecting the appliance to any electrical power supply, leave it standing (upright) for about 2
hours. This will reduce the possibility of malfunctions in the cooling system due to transport handling.
• Clean the appliance thoroughly, both interior and exterior. (See Cleaning and Maintenance)
WE CARE FOR THE ENVIRONMENT
• Our products use environmentally friendly (recyclable) materials. To this end, individual packaging
materials are clearly identified with a recycling symbol. Always use proper disposal methods.
• When any appliance finally wears out, always use safe and proper disposal methods.
(i.e. use authorized land fill sites only)
TIPS FOR ENERGY SAVINGS
• Try not to open the door too often, especially when the weather is hot and humid. Once you open the
door, close it as soon a s possible.
• Every now and then check the appliance to make sure it is receiving sufficient ventilation.
(adequate air circulation) behind the appliance.
• Set the thermostat from higher to lower settings as soon as possible
(this will depend on loaded conditions and ambient temperatures etc.,)
• Before loading the appliance with fresh foods, make sure they are cooled to ambient room temperature.
(excluding soups)
• If the door gasket is damaged or the door seal is poor, energy efficiency is lost and energy consumption
is substantially higher. To restore energy efficiency, replace the door gasket and/or adjust the door.
IMPORTANT
• This appliance must be connected to a properly "grounded" electrical outlet (see Grounding Instructions)
• If food or beverage has a strange smell or color, throw it away, because it is likely that it has spoiled
and therefore dangerous to consume.
• Always disconnect the appliance from the power supply before cleaning and/or attempting
repairs/servicing.
WARNING: Repairs should be performed by qualified service personnel only.
• Do not defrost this appliance using other electric appliances (i.e. hair dryer) and never attempt to
scrape/remove ice/frost from the evaporator (cold plate) with sharp objects.
• The rating plate containing Model No/Serial No. and other technical data specific to this unit, is located
on the exterior rear wall of the refrigerator cabinet.
DISPOSAL OF WORN OUT APPLIANCES
• When your appliance finally wears out, dispose of it in a safe and harmless manner. If you have bought
this appliance to replace an old one equipped with a door lock that cannot be opened from the inside,
(lock bolt) make sure the lock is removed, disabled or destroyed before discarding. This will make it
impossible for children to accidentally lock themselves inside the appliance and suffocate.
• The refrigerator system of this appliance is filled with refrigerant and insulating substances which should
be treated and processed separately. Call your nearest service agent or specialized servicing center. If
you are unable to locate one, contact your local authorities for proper disposal instructions. Be careful not
to damage the any of the refrigeration lines of the appliance.
2
WARNING
Instructions pertaining to the risk of fire, electric shock, or injury to persons.
GROUNDING INSTRUCTIONS
For your personal safety, this appliance must be grounded. In the event of a malfunction or breakdown,
grounding will reduce the risk of electric shock by providing a path of least resistance for electric current.
This appliance is equipped with a power cord having an equipment grounding conductor and grounding
plug. The plug must be plugged into an appropriate wall outlet that is installed and grounded in accordance
with all existing local codes and ordinances. Consult a qualified electrician or serviceman if the grounding
instructions are not clearly understood, or if doubt exist as to whether your electrical wall outlets are
properly grounded.
LOCATION
LOCATION
• Selecting the proper location will ensure peak performance levels of your appliance. Choose a location
where the unit will not be exposed to direct sunlight and away from heat emitting sources.
• This appliance is designed for "indoor" use only and should not be used "outdoors".
• This appliance is inclusive of an in-wall "static" (type) condenser and should not be built-in (recessed)
unless adequate ventilation is provided to maintain proper cooling. (minimum 2~3 inches clearance
required on all sides)
• If the unit (as a Keg Cooler application) is to be built-in, remember this will hamper;
1. Removal of the CO2 cylinder when it needs to be re-filled.
2. Reading/Monitoring/Adjustment of the low pressure CO2 regulator to maintain proper
operating pressure.
INSTRUCTIONS FOR SETTING UP THE CHILL'N TAP KEG COOLER
Please read and understand these instructions thoroughly before attempting assembly, installation and
operation of your Chill 'n Tap Keg Cooler. Remove and inspect all internal accessories (components)
supplied with this unit are present and in good condition. Acheck list of accessories is listed below for
reference purposes. In the event any accessory is missing and /or not in good condition, please contact our
after sales service department and ask for customer assistance. TO L LFREE NUMBER "1 800 26-DANBY"
3
Loading...