EKRP1C13
Electric heater PCB kit
Installation manual
Contents page
Content of kit EKRP1C13 ....................................................................................................................2
Name of parts ......................................................................................................................................2
Function possibilities............................................................................................................................3
Installation in unit .................................................................................................................................3
Electrical connections ..........................................................................................................................4
READ THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLATION.
KEEP THIS MANUAL IN A HANDY PLACE FOR FUTURE REFERENCE.
IMPROPER INSTALLATION OR ATTACHMENT OF EQUIPMENT OR ACCESSORIES
COULD RESULT IN ELECTRIC SHOCK, SHORT-CIRCUIT, LEAKS, FIRE OR OTHER
DAMAGE TO THE EQUIPMENT. BE SURE ONLY TO USE ACCESSORIES MADE BY
DAIKIN WHICH ARE SPECIFICALLY DESIGNED FOR USE WITH THE EQUIPMENT
AND HAVE THEM INSTALLED BY A PROFESSIONAL.
IF UNSURE OF INSTALLATION PROCEDURES OR USE, ALWAYS CONTACT YOUR
DAIKIN DEALER FOR ADVICE AND INFORMATION.
All field wiring and components must be installed by a licensed electrician and must
comply with relevant local and national regulations.
The field wiring must be carried out in accordance with the wiring diagrams and the
instructions given below.
Take care not to bend the printed circuit board when inserting or removing the connectors.
Installation manual
1
EKRP1C13
Electric heater PCB kit
4P584178-1
Content of kit EKRP1C13
Electrical Heater PCB Kit
INSTALLATION MANUAL
1 Connector to indoor PCB
2 Pilot lamp connection
3 Hour meter connection
4 Electric heater connection
5 Electric heater control relay power supply
6 Fuses 5 A - 250 V
7 Humidifier connection
Y4
F1U F2U
Y3
Y2
Y1
YC
CN1
CN2
X1 X2 X3 X4
Name of parts
1
CN2
2
EKRP1C13
Electric heater PCB kit
4P584178-1
X1 X2 X3 X4
F1U F2U
CN1
Y4
Y3
Y2
Y1
YC
7
4
5
63
Installation manual
2
Function possibilities
■ Compressor operation indication
■ Indoor fan operation indication
■ Electrical heater connection
■ Humidifier connection
Installation in unit
Do not drill any holes in the casing of the unit to install the option.
Only use the accessories provided by Daikin to install the option.
Refer to the installation manual of the indoor unit or refer to the option handbook if the option can be
installed inside the unit.
In all other cases use an installation box to mount the EKRP.
Installation manual
3
EKRP1C13
Electric heater PCB kit
4P584178-1