Daewoo DSD-9502T User Manual
USER’S GUIDE
DSD-9502T/9503T
Twin digital terrestrial Receiver &
Hard disc Recorder
DSD-9502T 2006.9.13 2:16 PM ˘ ` 1 mac001 1200DPI 90LPI
Introduction
11
Thank you for purchasing the Digital PVR.
Equipped with the latest technology and design, the DSD-9502T/9503T is a set-top box
ideal for digital terrestrial broadcast reception. The simple installation and operation, userfriendly three-dimensional OSD, Digital audio output with Dolby Digital ready, and
advanced video clarity made for TV and VCR are all designed to enrich the viewer
experience.
As a digital set-top box, it can receive FTA broadcasts. Outstanding stability and comfort
are its built in features. In addition to delivering more channels with its new highly
sensitive tuner, DSD-9502T/9503T boasts the Electronic Program Guide (EPG), for even
better program information on all channels, and information that enables subtitles and
teletext for a bounty of useful information on programs and broadcast signals.
As a twin tuner PVR, you can see picture in picture (PIP) to see two programmes on one
screen, you can record one channel while watching another. Furthermore, you can record
two channels simultaneously while playing back a previous recording from the HDD.
As a PVR, DSD-9502T/9503T utilizes the preloaded software functions by incorporating
the hard disk drive. This allows for assorted trick play, diverse formats of recording, and
recordings playback, all through the time shift recording function.
New versions can be updated through automatic software upgrade service (OAD). With
the latest software, viewers are always sure to enjoy endless hours of extraordinary digital
broadcasts and an abundance of data.
If you have any difficulties concerning the operation of your PVR, please refer to the
relevant section of this manual. This manual will provide you with useful information on
using the PVR.
DSD-9502T 2006.9.13 2:16 PM ˘ ` 1 mac001 1200DPI 90LPI
Important care and safety advice
22
This Digital PVR has been manufactured to meet international safety standards, but you
must take care to operate it safely.
It is important that you read these safety instructions.
If you have any doubts about the installation, operation, or safety of this Digital PVR,
contact Daewoo, as shown in the next page.
Electrical warning
• Your Digital PVR contains a high voltage which is sufficient to cause a dangerous
electric shock.
• Never remove the Digital PVR cover.
• There are no user-serviceable parts inside.
Switch off the power supply from the mains wall socket. before you disconnect any
equipment from the Digital PVR.
• Never push anything into holes, slots or other openings in the case.
Positioning the PVR
• The Digital PVR and cables should be placed so that they not likely to be walked on or
pinched by items placed upon or against them.
• Do not expose your Digital PVR to direct sunlight or to extreme temperatures (above
40°C or below -5°C), high moisture levels or dust.
• The apparatus shall not be exposed to dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on the apparatus.
• The ventilation should not be impeded by covering the ventilation openings with
items,such as newspapers,table-cloths,curtains,etc.
• Do not Place the Digital PVR on an unstable surface or on a bed, sofa, rug, or similar
surface as this may block air ventilation and cause it to overheat.
• Never place the Digital PVR over a radiator or in an unventilated cabinet. No naked
flame sources, such as candles, should be placed on the apparatus.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated “dangerous voltage” within
the product’s enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock.
The exclamation point within an
equilateral triangle is intended to alert the
user to the presence of important
operating and servicing instructions in the
literature accompanying the appliance.
DSD-9502T 2006.9.13 2:16 PM ˘ ` 2 mac001 1200DPI 90LPI
Important care and safety advice
33
Cleaning
• Cleaning : always disconnect from the mains supply before cleaning. Wipe with a lintfree cloth or one that has been slightly dampened with clean water. Never use
detergents, liquid cleaners.
Unplug when not in use
• When not in use for an extended period, unplug the Digital PVR from the mains outlet.
Do not overload wall outlets and extension adapters as this can result in a risk of fire or
electric shock.
Use only authorized servicing
Earthing : The antenna cable must be earthed.
If any of the following occur
• Any of the cables or plugs are damaged.
• Liquid has spilled onto, or objects have fallen into, the Digital PVR.
• The Digital PVR has been dropped or the casing has been damaged.
• The Digital PVR does not operate normally.
Carefully unplug the Digital PVR from the electrical outlet and
• Contact the retailer/ supplier who sold you the Digital PVR
• Call the Daewoo Helpline : 0870 100 2525
Or e-mail us at information@desuk.co.uk
End User licence
This hardware and software of this product are licensed to the user as a single product
that cannot be separated.
It is intended as domestic product for the purposes of receiving digital television services;
any other use is done so at the users risk.
In relation to the software the end user is prohibited from copying,transferring to a 3rd
party, modifying or otherwise attempting to derive the source code of any part or whole of
the software in the product.The software is not sold, but licensed for use in the European
Union to the owner of the hardware. New software maybe transmitted to the box by the
manufacturer in which case the licence transfers to the new software.
DSD-9502T 2006.9.13 2:16 PM ˘ ` 3 mac001 1200DPI 90LPI
44
Package contents
When you open the packaging you should find
1) Daewoo Digital PVR
2) Remote Control & Batteries
3) RF-lead
4) User’s Guide & Quick start Guide
• If any parts are missing, do not attempt to install this product.
Please contact the Daewoo Careline on 0870 100 2525.
Table of Contents
Introduction ____________________________________________________________ 1
Important care and safety advice ____________________________________________2
Table of Contents _______________________________________________________ 4
Package contents ________________________________________________________4
Front Panel ____________________________________________________________ 5
Rear Panel _____________________________________________________________6
Remote Control _________________________________________________________ 7
Connecting the PVR ______________________________________________________8
Installation wizard _______________________________________________________11
Basic Operation ________________________________________________________12
PIP and Time Shifted Recording ____________________________________________14
Recording and Playback __________________________________________________16
Using the Main &Setup Menu ’s ____________________________________________19
Where to get more help __________________________________________________25
Specification ___________________________________________________________26
DSD-9502T 2006.9.13 2:31 PM ˘ ` 4 mac001 1200DPI 90LPI
55
Front Panel
1 Power On indicator
2 Remote indicator
3 Hard disk drive indicator
; will be visible when hard disk drive is in use ie when in record or time shift mode.
4 Menu Button
; allows access to on screen menu.
5 OK button
; can be used to select a menu or confirm menu options.
6 Standby Button
; switches between Operation and Standby modes.
7 Menu up/down Buttons
; can be used for moving up and down Menu screens.
8 Menu left/right Buttons
; can be used for moving left and right Menu screens.
78
1
23 456
DSD-9502T 2006.9.13 2:16 PM ˘ ` 5 mac001 1200DPI 90LPI
66
Rear Panel
1 RF IN
; connects your aerial.
2 Audio L/R
; connects to your TV or VCR and outputs audio signals.
3 T V Scart
; connects a T V SCART cable.
4 RF OUT
; connects an RF to the RF (ANT) input on your TV or VCR.
5 S/PDIF
; outputs the digital audio signals.
6 VCR/DVD SCART
; connects to your VCR/DVD.
RF IN
RF OUT
L
R
AUDIO
OUT
S/PDIF
OUT
TV
VCR
DVD
100-240V50/60Hz, 18W
Manufactuered under license from Dolby Laboratories.
"Dolby" and the double-D symbol are
trade marks of Dolby Laboratories.
DIGITAL TERRESTRIAL RECEIVER
HARD DISC RECORDER
MADE IN UK
4 5 6
1 2 3
DSD-9502T 2006.9.13 2:16 PM ˘ ` 6 mac001 1200DPI 90LPI
77
1 Mute
; pauses the audio temporarily.
2 TV/DVR
; switches between DVR and TV.
3 Number buttons
4 EPG
; Electronic Programme Guide
5 Menu
; choose and change a wide range of PVR’s
features. Or exit the menu.
6 Arrow buttons
; allows you to move through
menu’s. Or navigates in playback mode.
7 Record
; initialises the record - see relevant section
in this manual.
8 Channel +/-
; allows you to change channel.
9 Playback control buttons
; Includes Play, Fast
Forward, Rewind, Pause and Stop.
10 Time Shift
; activates time shift function -see
relevant section in this manual)
11 Colour buttons
; used for selecting interactive
applications.
12 Subtitle
; switch ON/OFF programme subtitles.
13 Audio
; displays audio language menu.
14 Wide
; sets display format.
15 FAV
; moves to favourite TV channels (List 1 - List 2...)
16 Standby
; switches between operation and standby modes.
17 Info
; displays information on the current and next programs on the channel.
18 Library
; displays Recording library menu.
19 Timer
; accesses the timer programming channels
20 TEXT
; enters TeleText service.
21 OK
; selects channel list or confirms the selected operation.
22 BACK
; exits from TeleText service.
23 Volume +/-
; allows volume control.
24 Swap
; swaps the focus between the main and the PIP screen.
25 PIP
; displays the picture in picture (PIP) screen.
26 PIP+/-
; changes the PIP Channel.
Remote Control
DSD-9502T 2006.9.13 2:16 PM ˘ ` 7 mac001 1200DPI 90LPI
88
Connecting the PVR
SCART connections offer the best picture and sound quality.
They can also tell your TV when the Digital PVR is switched on and off and whether
widescreen pictures are being broadcast. Therefore this is the way this box has been
designed to be connected.
• Make sure your TV is switched off, together with any other equipment you are
connecting to it.
• Insert the cable from your aerial into the Digital PVR socket marked ‘RF IN’.
1. Connect your aerial to the Digital PVR.
Choose the option below that best suits your TV (and VCR, if you have one). If you need a
longer SCART cable, you can find one at most TV or electronics retailers.
Ask for a “fully-populated” SCART lead.
Option 1: connecting to a TV only
• Connect the SCART cable between the ‘TV’ socket on your Digital PVR’s rear panel
and your TV’s SCART socket.
• Connect an RF cable between the ‘RF OUT’ output on the Digital PVR and the RF
socket on your TV (where you normally connect the aerial).
2. Connect the SCART cable.
RF IN
RF OUT
L
R
AUDIO
OUT
S/PDIF
OUT
TV
VCR
DVD
100-240V50/60Hz, 18W
Manufactuered under license from Dolby Laboratories.
"Dolby" and the double-D symbol are
trade marks of Dolby Laboratories.
DIGITAL TERRESTRIAL RECEIVER
HARD DISC RECORDER
MADE IN UK
SCART Cable
(Not supplied)
RF Cable
AERIAL
TV
DSD-9502T 2006.9.13 2:16 PM ˘ ` 8 mac001 1200DPI 90LPI
Loading...