Daewoo DLT-32C5 User Manual
LCD TELEVISION
INSTRUCTION MANUAL
DLT-26C2
DLT-26C3
DLT-32C2
DLT-32C3
DLT-32C5
DLT-32C6
DLT-32C7
DLT-37C3
GB
DLT-37C7
Helpline Number: 0870 100 2525
Caution
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to
alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk electric shock.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and servicing instructions in the literature accompanying the appliance.
WARNING:
CAUTION :
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
DISPOSAL OF USED ELECTRICAL & ELECTRONIC EQUIPMENT
(Europe only)
The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose
of this equipment at your applicable collection point for the recycling of electrical & electronic equipments waste. In the European Union and Other European countries which there are separate collection systems for used electrical
and electronic product. By ensuring the correct disposal of this product, you will
help prevent potentially hazardous waste to the environment and to human
health, which could otherwise be caused by unsuitable waste handling of this
product. The recycling of materials will help conserve natural resources. Please
do not therefore dispose of your old electrical and electronic equipment with
your household waste. For more detailed information about recycling of this
product, please contact your local city office, your household waste disposal
service or the shop where you purchased the product.
2
Important
Safeguards
Please read the following safeguards for your TV and retain for future reference.
Always follow all warnings and instructions marked on the television.
1. Read, Retain and Follow All Instructions
Read all safety and operating instructions before operating the TV. Retain them safely for future reference.
Follow all operations and instructions accordingly.
2. Heed Warnings
Adhere to all warnings on the appliance and in the operating instructions.
3. Cleaning
Unplug the TV from the wall outlet before cleaning. Do not use liquid, abrasive, or aerosol cleaners. Cleaners can permanently damage the cabinet and screen. Use a lightly dampened cloth for cleaning.
4. Attachments and Equipment
Never add any attachment and/or equipment without approval of the manufacturer as such additions may result in
the risk of fire, electric shock or other personal injury.
5. Water and Moisture
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such
as vases, shall be placed on the apparatus.
6. Setting
Do not place this TV on an unstable cart, stand or table. Placing the TV on an unstable base can cause the
TV to fall, resulting in serious personal injuries as well as damage to the TV. Use only a cart, stand, bracket
or table recommended by the manufacturer or salesperson.
7. Ventilation
Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the TV and to protect
it from overheating. Do not cover the ventilations openings in the cabinet and never place the set in a confined space
such as built-in cabinet unless proper ventilation is provided. Leave a minimum 10 cm gap all around the unit.
8. Power Source
This TV should be operated only from the type of power source indicated on the marking label. If you are not sure of
the type of power supplied to your home, consult your appliance dealer or local power company.
9. Grounding or Polarization
This TV is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This
plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug. A warning that an apparatus with CLASS I construction shall
be connected to a MAINS socket outlet with a protective earthing connection.
10. Power-Cord Protection
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at plugs, wall outlets, and the point
where they exit from the TV. MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable.
11. Lightning
For added protection for this TV during a lightning storm, or when it is left unattended and unused for long periods
of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the
TV due to lightning and power-line surges.
3
Important
Safeguards
12. Power Lines
An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power
circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines or circuits as contact with
them might be fatal.
13. Overloading
Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
14. Object and Liquid Entry
Never push objects of any kind into this TV through openings as they may touch dangerous voltage points or shortout parts that could result in fire or electric shock. Never spill liquid of any kind on or into the TV.
15. Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the
TV, be sure the antenna or cable system is grounded so as to
provide some protection against voltage surges and builtup static charges.
Section 810 of the National Electric Code, ANSI /NFPA No. 701984, provides information with respect to proper grounding of the mast and supporting structure, grounding of the
lead in wire to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit, connection
to grounding electrodes, and requirements for the grounding electrode.
16. Servicing
Do not attempt to service this TV yourself as opening or removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service personnel.
17. Damage Requiring Service
Unplug the TV from the wall outlet and refer servicing to qualified service personnel under the following conditions:
(a) When the power-supply cord or plug is damaged.
(b) If liquid has been spilled, or objects have fallen into the TV.
(c) If the TV has been exposed to rain or water.
(d) If the TV does not operate normally by following the operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to restore the TV to its normal operation.
(e) If the TV has been dropped or the cabinet has been damaged.
(f) When the TV exhibits a distinct change in performance - this indicates a need for service.
18. Replacement Parts
When replacement parts are required, be sure the service technician has used replacement parts specified by the
manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
19. Safety Check
Upon completion of any service or repair to the TV, ask the service technician to perform safety checks to determine
that the TV is in safe operating condition.
20. Heat
The product should be situated away from heat sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
21. Disconnection
Please place the TV set in such a way that the main plug can be easily disconnected.
EXAMPLE OF ANTENNA GROUNDING
Ground clamp
Electric
Service
Equipment
Antenna lead in wire
Antenna discharge unit
(NEC section 810-20)
Grounding conductors
(NEC section 810-21)
Ground clamps
Power service grounding
Electrode system
(NEC art 250, part h)
NEC — national electrical code
4
Warning
This section must be read carefully and followed by the user prior to the operation of the product.
The manual states important instructions for the user’s own safety, and the proper operation of the product.
Ignoring or disregarding the contents of this section and im-
WARNING
In case of an accident, please unplug the unit from the outlet immediately.
proper operation of the product may result in the person’s death
or serious injury.
To reduce the risk of electric shock, do not remove cover or back.
No user -serviceable parts inside. Refer to qualified service personnel for repair.
To prevent fire and damages to the product, unplug the unit
from the outlet during lightning storm, or when it is left unattended and unused for a long period of time.
Slots and openings in the case are provided for ventilation to ensure
reliable operation of the product. Never put in any item-such as a
coin, paper, match- through these openings since it may touch dangerous voltage points that could result in fire or shock hazard.
Do not put any object that contains water - such as flowerpot near to the unit. The water may penetrate into the unit, and be a
cause of fire or hazardous electric shock.
Do not put on or use the product near water and moisture-such
as in a bathroom, washbowl, etc. It may be a cause of fire and
electric shock hazards.
Do not let children hang on or climb on the product since it may
be a cause of serious injury.
Hold the plug when unplugging the unit from the outlet. The cord
may cause fire or electric shock if damaged.
Do not cause the product to lean or put it in an unstable place
since it may cause a serious injury to a person, as well as damage
to the product if it falls.
5
Warning
This section must be read carefully and followed by the user prior to the operation of the product.
The manual states important instructions for the user’s own safety, and the proper operation of the product.
Ignoring or disregarding the contents of this section and im-
CAUTION
Please keep the user’s manual in a safe place for future reference.
proper operation of the product may result in the person’s death
or serious injury.
Do not put volatile substance-such as benzene,
naphtha- near the product since it may cause
a change in the product’s colour.
Refer servicing to qualified service personnel
for cleaning at least once a year since dust inside the TV set may be a result or fire and malfunctioning of the product.
Do not put on any heavy item on the power
cord since it may result in fire or hazardous
electric shock if the cord is damaged.
Do not spill water or drop the remote controller
since it may be a cause of malfunctioning.
Do not cover the top of the television set. Ventilation will be prevented, and it may be a cause of
fire if the product is internally overheated.
Please be advised of electric wires and cables when installing the antenna. It may be
a cause of hazardous electric shock and fire
if the antenna touches or falls on the electric
wire; thus, it must be installed firmly, and far
away from the cables.
Do not view the TV too closely since it may
cause damage in your eyesight.
The product should be situated away from any
heat source-such as radiators, heat registers,
stoves, or other products that produce heat.
Unplug the power from the outlet and all the
related connections from the unit to prevent
electric shock. At least two people must work
together to move the TV set when transporting to prevent the TV from falling, and consequently, any serious injury or damage.
Do not touch the power cord with moisturized or wet hands when plugging to or unplugging from the outlet since it may be a cause
of electric shock.
Do not expose the product to a dusty or moisturized place since it may be a cause of malfunctioning.
6
Table of
Contents
Installation and Maintenance
Antenna Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Video Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Camcorder & Video Game Connection. . . . . . . . . . . . . . . . . . . . 13
DVD Player Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
STB (Set Top Box) Connection . . . . . . . . . . . . . . . . . . . . . . . . . 15
PC Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Cable TV Broadcasting Connection . . . . . . . . . . . . . . . . . . . . . . 18
Connect with the Dolby Digital AMP . . . . . . . . . . . . . . . . . . . . . 19
Name of Each Part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Basic Guide
Parts of the Remote Controller . . . . . . . . . . . . . . . . . . . . . . . . . 22
Method To Use Basic Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
To Watch TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Setting Up TV Stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
DVB Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Selection of AV and Multimedia Input Signal. . . . . . . . . . . . . . . . 37
Application Guide
Screen Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Sound Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Selection of Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Adjustment of Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Other Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Teletext. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Standard of Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
7
Supplied
P
R
P
R
Accessories
Make sure that the following accessories are provided with the product.
AC cord Instruction manual
Remote controller Batteries
Cable holder
(Except C2 Series)
The method of wire arrangement
1. Assemble the cable holder enclosed on the back of TV.
(PICTURE1)
(ASSEMBLY METHOD: After you push the
„A”(prominence part of cable holder) in the hole, rotate
the cable holder clockwise as an angle of 90°. You can
separate in reverse order of assembly.)
2. Open the cable holder. (PICTURE 2)
( you can open the cable holder that press and push „B”
part.)
3. After arrange lines with the cable holder, lock the „B”
again. (PICTURE 3)
- When you install wall mounting you set up cover bottom like
Cover Bottom
upper picture.
8
Antenna
Connection
Indoor Antenna Connection
1. Connect the feeder cable of the antenna to the combining adapter.
WHEN THE IMAGE IS NOT CLEAR : Unclear screen image and bad reception may be a cause of wrong antenna con-
2. Connect the combining adapter to the antenna input at the left side of the TV set.
WHEN USING THE COMBINING ADAPTER : You may obtain the combining adapter at your closest Service Cen-
nection. Be sure to check its direction and place when installing.
combining adapter
tre.
indoor aerial
HDMI INPUT AV1 AV2
PC INPUT PC AUDIO
AV3 L - AUDIO - R
S-VHS
Back of the tv set
Antenna Input
9
OPTICAL
Pr
Pb Y
RL
COMPONENT
Antenna
Connection
CTV Antenna Connection
Such community TV Antenna installation may be found in most of co-op apartments.
When a coaxial cable is used : Plug the coaxial cable to the antenna socket, and fix it firmly by turning it to the right.
Antenna socket on the wall
When a feeder cable is used : Plug the coaxial cable to the antenna socket, and fix it firmly by turning it
to the right.
Antenna socket on the wall
Feeder cable connection with the combining adapter
Antenna socket at the left side of the TV set
ANT/CABLE
Antenna socket at the left side of the TV set
ANT/CABLE
10
Antenna
Connection
Outdoor Antenna Connection
Outdoor Antenna connection-such as VHF or/and UHF-may be necessary for installation at private houses.
Single Antenna Connection
VHF Antenna
UHF Antenna
Separate Antenna Connection.
VHF Antenna
In case of coaxial cable
In case of feeder cable
Back of the tv set
HDMI INPUT AV1 AV2
PC INPUT PC AUDIO
S-VHS
AV3 L - AUDIO - R
OPTICAL
Pr
RL
COMPONENT
ANT/CABLE
Pb Y
UHF Antenna
ANT/CABLE
ANTENA combining Adapter
(Separate purchase)
11
O
Video
Connection
Connecting with an External Source
You may connect an S-Video input to enjoy clearer and brighter picture images. You can make the connection with
the AV3 input.
Note :
S-Video
If S-video and RCA jack are connected the same time, The TV set will only detect the S-Video
HDMI INPUT AV1 AV2
PC INPUT PC AUDIO
S-VHS
AV3 L - AUDIO - R
mode.
• If your AV device has both Video OUT terminal and S-Video OUT terminal, the S-Video connection is rec-
ommended for better picture quality.
Connecting with SCART VIDEO
1. Prepare the scart lead for picture / sound.
2. Connect the SCART input / output terminal of video with the SCART1(AV1), SCART2(AV2), input/output terminal of TV.
3. Turn on the video, Insert the video cassette, and press the “PLAY” button.
HDMI INPUT AV1 AV2
PC INPUT PC AUDIO
S-VHS
AV3 L - AUDIO - R
OPTICAL
Pr
RL
COMPONENT
Back of the tv set
Pb Y
VIDEO
Note :
• SCART1 has CVBS/RGB input and RF output. It is used to connect a STB, VCR and DVD.
• SCART2 has CVBS input. It is used to connect a STB, VCR and DVD.
12
Camcorder & Video
Game Connection
Watching the Camcorder Recording on TV
1. Prepare the S-video and RCA connector.
2. These connectors connect to S-video or AV 3 as shown in the picture below.
3. Turn on the TV set and camcorder/video game.
4. Select AV3/S-video mode, using the ”AV”button of the Remote controller or “ ” button of the TV set.
Note :
HDMI INPUT AV1 AV2
PC INPUT PC AUDIO
S-VHS
Camcorder
AV3 L - AUDIO - R
Back of the tv set
Video game
If S-video and RCA jack are connected at the same time, the TV set only detects the S-Video
OPTICAL
Pr
RL
COMPONENT
Pb Y
mode.
* If your AV device has both Video OUT terminal and S-Video OUT terminal, the S-Video connection is rec-
ommended for better picture quality.
13
DVD Player
connection
When connecting with a component cable and Euro SCART cable
HDMI INPUT AV1 AV2
OPTICAL
PC INPUT PC AUDIO
S-VHS
AV3 L - AUDIO - R
Pr
Pb Y
RL
COMPONENT
Back of the tv set
DVD
Note :
• When you connect with the component video, please check the colour of the cable between the DVD
and TV set.
When connecting with a S-VHS cable and RCA cable
HDMI INPUT AV1 AV2
PC INPUT PC AUDIO
S-VHS
OPTICAL
Pr
Pb Y
RL
AV3 L - AUDIO - R
COMPONENT
Back of the tv set
DVD
Note :
If S-video and RCA jack are connected at the same time, the TV set will only detect the S-Video mode.
• If your AV device has both Video OUT terminal and S-Video OUT terminal, the S-Video connection is recommended
for better picture quality.
14
STB(Set Top Box)
Connection
When connecting with a HDMI cable
HDMI INPUT AV1 AV2
PC INPUT PC AUDIO
S-VHS
AV3 L - AUDIO - R
OPTICAL
COMPONENT
Pr
Pb Y
RL
Back of the tv set
Set Top Box
When connecting with a component cable
HDMI INPUT AV1 AV2
OPTICAL
PC INPUT PC AUDIO
S-VHS
AV3 L - AUDIO - R
Back of the tv set
Set Top Box
15
Pr
Pb Y
RL
COMPONENT
PC
Connection
When connecting with PC(D-Sub) cable.
1. First adjust resolution of the PC. (Refer to table in page 17.)
2. Connect between PC and TV set using the D-sub and Audio cable as shown in the picture below.
3. Turn on the PC and TV set.
4. Select PC mode by pressing the “MULTIMEDIA” button on the remote control or ” ” button of the TV set.
Back of the tv set
HDMI INPUT AV1 AV2
PC INPUT PC AUDIO
S-VHS
AV3 L - AUDIO - R
PC
OPTICAL
COMPONENT
Pr
Pb Y
RL
When connecting with a HDMI cable.
1. First adjust resolution of the PC. (Refer to table in page 17.)
2. Connect between PC and TV set using the HDMI and Audio cable as shown in the picture below.
3. Turn on the PC and TV set.
4. select HDMI mode by pressing the “MULTIMEDIA” button on the remote control or ” ” button of the TV set.
Back of the tv set
HDMI INPUT AV1 AV2
PC INPUT PC AUDIO
S-VHS
AV3 L - AUDIO - R
PC
OPTICAL
COMPONENT
Pr
Pb Y
RL
Note :
If the graphic card of the PC only supports a DVI signal, you must connect the Audio cable as shown
in the picture upper.
16
Loading...