The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user
to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute the risk of an electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance.
WARNING:
CAUTION :
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
DISPOSAL OF USED ELECTRICAL & ELECTRONIC EQUIPMENT
(Europe only)
The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste. Please dispose of this equipment at your applicable
collection point for the recycling of electrical & electronic equipment waste. In the European Union and Other European countries which there are separate collection systems for used electrical and electronic product. By ensuring the correct disposal of this product, you will help prevent
potentially hazardous waste to the environment and to human health, which could be caused
by unsuitable waste handling of this products. The recycling of materials will help conserve natural resources. Please do not therefore dispose of your old electrical and electronic equipment
with your household waste. For more detailed information about recycling of this product, please
contact your local city office, your household waste disposal service or the shop where you purchased the product.
RoHS (Directive 2002/95/EC) Compliant
This environment-friendly product does not contain the EU RoHS restricted substances (Pb, Hg,
Cd, Cr6+, PBB, and PBDE).
2
Important
Safeguards
Please read the following safeguards for your T V and retain for future reference.
Always follow all warnings and instructions marked on the television.
1. Read, Retain and Follow All Instructions
Read all safety and operating instructions before operating the TV. Retain them safely for future reference. Follow
all operations and instructions accordingly.
2. Heed Warnings
Adhere to all warnings on the appliance and in the operating instructions.
3. Cleaning
Unplug the TV from the wall outlet before cleaning. Do not use liquid, abrasive, or aerosol cleaners. Cleaners can permanently damage the cabinet and screen. Use a lightly dampened cloth for cleaning.
4. Attachments and Equipment
Never add any attachment and/or equipment without approval of the manufacturer as such additions may result in the risk of fire, electric shock or other personal injury.
5. Water and Moisture
The apparatus most not be exposed to dripping or splashing and no objects filled with liquids, such
as vases, should be placed very close to the apparatus. Because they may be splashed when watering the plant.
6. Setting
Do not place this TV on an unstable cart, stand or table. Placing the TV on an unstable base can cause
the TV to fall, resulting in serious personal injuries as well as damage to the TV. Use only a cart, stand,
bracket or table recommended by the manufacturer or salesperson.
7. Ventilation
Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the
TV and to protect it from overheating. Do not cover the ventilation openings in the cabinet and never place the set
in a confined space such as a built-in cabinet unless proper ventilation is provided. Leave a minimum 10 cm gap all
around the unit.
8. Power Source
This TV should be operated only from the type of power source indicated on the marking label. If you are not sure of
the type of power supplied to your home, consult your appliance dealer or local power company.
9. Grounding or Polarization
This TV is equipped with a polarized alternating current line plug (a plug having one blade wider than the other).
This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully
into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
10. Power-Lead Protection
Power-supply leads should be routed so that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to leads at plugs, wall outlets, and the point
where they exit from the TV. MAINS plug which is used as the disconnect device. The disconnect device shall remain readily operable.
11. Lightning
For added protection for this TV during a lightning storm, or when it is left unattended and unused for long periods
of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the
TV due to lightning and power-line surges.
3
Important
Safeguards
12. Power Lines
An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken from touching such power lines or circuits as contact with them might be fatal.
13. Overloading
Do not overload wall outlets and extension leads as this can result in a risk of fire or electric shock.
14. Object and Liquid Entry
Never push objects of any kind into this TV through openings as they may touch dangerous voltage
points or short-out parts that could result in fire or electric shock. Never spill liquid of any kind on or into the TV.
15. Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the
TV, be sure the antenna or cable system is grounded so as to
provide some protection against voltage surges and builtup static charges. Section 810 of the National Electric Code,
ANSI /NFPA No. 70-1984, provides information with respect
to proper grounding of the mast and supporting structure,
grounding of the lead in wire to an antenna discharge unit,
size of grounding conductors, location of antenna discharge
unit, connection to grounding electrodes, and requirements
for the grounding electrode.
16. Servicing
Do not attempt to service this TV yourself as opening or removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service personnel.
17. Damage Requiring Service
Unplug the TV from the wall outlet and refer servicing to qualified service personnel under the following conditions:
(a) When the power-supply lead or plug is damaged.
(b) If liquid has been spilled, or objects have fallen into the TV.
(c) If the TV has been exposed to rain or water.
(d) If the TV does not operate normally by following the operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to restore the TV to its normal operation.
(e) If the TV has been dropped or the cabinet has been damaged.
(f) When the TV exhibits a distinct change in performance - this indicates a need for service.
18. Replacement Parts
When replacement parts are required, be sure the service technician has used replacement parts specified by the
manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire,
electric shock or other hazards.
19. Safety Check
Upon completion of any service or repair to the TV, ask the service technician to perform safety checks to determine
that the TV is in a safe operational condition.
20. Heat
The product should be situated away from heat sources such as radiators, heat registers, stoves,
or other products (including amplifiers) that produce heat.
21. Disconnection
Please place the TV set in such a way that the main plug can be easily disconnected.
EXAMPLE OF ANTENNA GROUNDING
Ground clamp
Electric
Service
Equipment
NEC — national electrical code
Ground clamps
Power service grounding
Electrode system
(NEC art 250, part h)
Antenna lead in wire
Antenna discharge unit
(NEC section 810-20)
Grounding conductors
(NEC section 810-21)
4
Warning
This section must be read carefully and followed by the user prior to the operation of the product.
The manual states important instructions for the user’s own safety, and the proper operation of the product.
Ignoring or disregarding the contents of this section and im-
WARNING
In case of an accident, please unplug the unit from the outlet immediately.
proper operation of the product may result in the person’s
death or serious injury.
To reduce the risk of electric
shock, do not remove cover
or back. No user serviceabl e
parts inside. Refer to qualified service personnel for
repair.
To prevent fire and damages
to the product, unplug the
unit from the outlet during a
lightning storm, or when it is
left unattended and unused
for a long period of time
Slots and openings in the case
are provided for ventilation
to ensure reliable operation
of the product. Never put in
any items-such as coins, paper, matches- through these
openings as they may touch
dangerous voltage points
that could result in fire or
shock hazard.
Hold the plug when unplugging the unit from the outlet.
The lead may cause fire or electric shock if damaged.
Do not put any object that
contains water - for example
a vase, flower pot, etc. - near to
the unit. The water may penetrate into the unit, and be
a cause of fire or hazardous
electric shock.
Do not put on or use the product near water and moisturesuch as in a bathroom, washbowl, etc. It may cause fire
and electric shock hazards
Do not let children hang on to
or climb on the product since it
may cause serious injury.
Do not cause the product to
lean or put it in an unstable
position because if it falls it
may cause serious injury to a
person, as well as damage to
the product if it falls.
Do not put volatile substances such as benzene, naphtha- near the product since
it may cause a change in the
product’s colour.
Do not spill water on to or
drop the remote control
since it may cause a malfunction.
5
Warning
This section must be read carefully and followed by the user prior to the operation of the product.
The manual states important instructions for the user’s own safety, and the proper operation of the product.
Ignoring or disregarding the contents of this section and
CAUTION
Please keep the user’s manual in a safe place for future reference.
improper operation of the product may result in the person’s death or serious injury.
Do not view the TV too closely since it may cause damage
to your eyes.
Do not cover the top of the television set. Ventilation will be
prevented, and it may cause a
fire if the product is internally overheated.
Do not put heavy items on
the power lead since it may
result in a fire or hazardous
electric shock if the lead is
damaged.
Do not touch the power lead
with moisturised or wet hands
when plugging to or unplugging from the outlet since it may
cause an electric shock.
Refer servicing to qualified
service personnel for cleaning at least once a year since
dust inside the TV set may result in a fire or malfunction of
the product.
The product should be situated away from any heat sourcesuch as radiators, heat registers, stoves, or other produc ts
that produce heat.
Please be aware of electric
wires and cables when installing the antenna. It may
be a cause of hazardous electric shock and fire if the antenna touches or falls on the
electric wire; thus, it must be
installed firmly, and far away
from the cables.
Do not expose the product to
a dusty or moisturised place
since it may cause malfunction.
Make sure that the following accessories are provided with the product.
Remote controlInstruction manualBatteries
2 x 1,5V AAA
Cover Stand Base *Frame Stand *
Cover Stand Base **Frame Stand **Frame Stand Cover **
*) - Screws, Cover Stand Base and Frame Stand are only for DLT-19W4T and DLT-22W4T. For installing stand, see page 9.
**) - Screws, Cover Stand Base, Frame Stand Cover and Frame Stand are only for DLT-19L2T/L1T and DLT-22L2T/L1T.
For installing stand, see page 10.
8
Install
Stand
※This page is only for DLT-19W4T and DLT-22W4T.
1. Insert Frame Stand into the Cover Stand Base and insert two screws (Ø3 x 12mm ) in the hole at the bottom of
the stand and tighten.
* Please insert two screws in the hole at the bottom of the stand.
2. Place the TV faced down on a soft cloth or cushion on a table and insert the assemble stand into the metal at the
bottom of the TV.
3. Insert two screws (Ø4 x 14 mm) into the holes indicated and tighten.
9
Install
Stand
※ This page is only for DLT-19L1T/L2T and DLT-22L1T/L2T.
1. Insert Frame Stand Cover into the Cover Stand Base and insert Frame Stand into Cover Stand Base - insert two
screws (Ø4 x 14mm ) in the hole at the bottom of the stand and tighten.
2. Place the TV faced down on a soft cloth or cushion on a table and insert the assemble stand into the metal at the
bottom of the TV.
3. Insert two screws (Ø4 x 14 mm) into the holes indicated and tighten.
10
SUBCODE
SELECT
OK
PR/PAGE
PR/PAGE
Parts of the Remote
Control
1.
MUTE
Press again, and the sound returns.
2.
3.
DVB/Analogue
between DVB & RF Analogue. Also you can come back to the current TV mode from any External mode.
(1) Component
(2) SCART sockets
(3) HDMI inputs
(4) Headphone jack
(5) Audio Input (L+R) Socket
(6) Video Input Socket
(7) Digital Audio out coaxial
(8) PC Input
(9) PC Audio
(10) CI socket
(11) Aerial jack
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
14
Preparation
Inserting Batteries into the Remote Control Unit
To load the batteries, turn the remote control handset over and open the battery compartment.
Insert the batteries (Two 1.5V, type R03 or AAA).
Make sure that the polarity matches with the (+) and (-) marks inside of the
battery compartment.
Note:
To avoid damage from possible battery leakage, remove the batter-
ies if you do not plan to use the remote control handset for an extended period of time.
Mains Connection
1. Plug the end of AC cord into a Power outlet with 220V-240V~,50Hz.
Power outle t
AC Cord
batteries
15
Loading...
+ 35 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.