Daewoo 14Q2M, 20Q2M, 14T2M, 20T2M, 21T2M User's Guide

INSTRUCTION MANUAL

MODEL NO.

14Q2M, 20Q2M, 21Q2M
14T2M, 20T2M, 21T2M
KR14E5, KR20E5, KR21E5
KR14U1T, KR20U1T, KR21U1T
KR21U3T
KR14V1T, KR20V1T, KR20V4T
KR20U2T, KR21V1T, KR21V4T

INSTRUCTION MANUAL

CCOOLLOOUURR TTEELLEEVVIISSIIOONN

Contents

Important safeguards 1
Before Operation 2
Connecting external equipment 3
Identification of Controls 5
Daily use 6
Menus 8
Teletext (Option) 14
Specifications 16
Troubleshooting 17

This information is placed by The law of RF on
Protechion of the Consumer Rights and the
Governmental Resolution of RF No.720.

The working life of this set is 7 years since its
production date. After the working life, this set may
be not work properly and cause damage to the life of

the customer or his property.

1

Important safeguards

WATER AND MOISTURE

Never install the set in the following places : In a wet
basement, bathroom. Do not place any container with
liquid on the set.

HEAT

Never place the set near heat sources.

VENTILATION

Do not cover the ventilation openings in the cabinet and
never place the set in a confined space such as a
bookcase or built-in unless proper ventilation is provided.
Leave a minimum 10cm gap all around the unit.

OBJECT ENTRY

Do not insert foreign objects, such as needles and coins,
in the ventilation openings.

LIGHTNING STRIKING

You should disconnect the set from the mains and the
aerial system during thunderstorms.

CLEANING

Unplug the set from the mains during cleaning.

AFTER MOVING THE SET

If the set is moved in a different direction, the MAIN
POWER button must be switched off for at least 15
minutes in order to take out a colour strain on the screen.

2

Before Operation

INSERTING BATTERIES INTO THE REMOTE CONTROL UNIT.(OPTION)

Insert the batteries (two 1.5V, type AAA)

MAINS CONNECTION

Plug the mains cable into the power socket with 100V-250V, 50/60Hz AC.

AERIAL CONNECTION

When using an outdoor aerial, it is usually connected to the set by means
of 75 ohm.

SWITCHING ON AND OFF

Switching on

Switch the set on with the MAIN POWER button(ON/OFF), and then PR UP
button on the front of the set.

Or button or the PR UP button or one of the NUMBER buttons
on the remote control.

Switching off

Press button, on the remote control to return the set to its stand by
mode.
If you don't use the set for an extended period of time, turn it off with
MAIN POWER button on the set.

Battery options

3

TV AND A

TV AND AVV

RCA JACK A

RCA JACK A

V (BACK)

V (BACK)

Connecting external equipment

Use the TV/AV( ) button on the remote control or on the front of

the set to select one of the three options. Whenever the TV/AV

( ) button is pressed, the on-screen display will be changed as

shown: AV TV ( S-VHS is Russia only )

MANU

MANU

This is used to connect a VCR, a Camcorder, a S-VHS VCR, a PERI-TV decoder

or a video game console.

In most cases, the set changes automatically to AV when the VCR connected is in

display mode. If not, press the TV/AV

()

button on the remote control unit
or on the front of the set.
You must turn the external equipment off or press the TV/AV button to return to
the TV mode.

MANU

SCART (OPTION)

4

LOCAL CONTROL

LOCAL CONTROL

RCA JACK A

RCA JACK A

V (FRONT)

V (FRONT)

Front

OR

Connect the AV (Audio/Video) socket with an
appropriate cable to the corresponding socket
of the external equipment. Select AV mode by

pressing the TV/AV( ) button.
Press the TV/AV( ) button to return to

the TV mode.

MANU

MANU

HEADPHONE JACK

Insert the headphone plug(3,5mm) into the
headphone socket.
The sound from the speaker will be cut off.

NOTE:

NOTE: If two apparatus are connected,

one to the front AV Jack and the other to
the rear SCART Jack, you can play only
one apparatus.
one of the them must be switched off.

CAMCORDER

VIDEO GAME