Daewoo DWD-F1011, 1212, 1213, 1211, 1013 User Manual

...

Download

INSTRUCTION MANUAL

DWD-F1011/1012/1013’S/F1211/1212/1213’S

Washing Machine Instruction Manual

CONTENTS Page

A NOTE TO YOU

Thank you for buying a DAEWOO appliance. DAEWOO washers are easy to use, save time, and help you manage your home better. This manual contains valuable information about how to operate and maintain your washer property and safely. Please read it carefully.

󱇲 Economic wash system

Using artificial intelligence, the washer uses minimum energy and water by selecting optimal water lever and washing time.

󱇲 Low noise system

The washer minimizes the washing and spinning noises by sensing the amount of laundry.

󱇲 Child-Lock

The Child-Lock system has been used to prevent children from pressing any button to change the program during operation.

󱇲 Nano-silver sterilization washing(Option)

By applying very fine silver particles on essential parts inside, the washer sterilizes up to 99.9% as is done by boiling wash.

󱇲 Air bubble washing(Option)

This is an advanced technology that generates millions of air bubbles inside the drum on washing sequence, and the bubbles dissolve the detergent particles completely and cleanse all the soil in clothes gently and neatly.

PARTS AND FEATURES.................................................................................................................2

WASHER SAFETY...........................................................................................................................3

INSTALLATION INSTRUCTIONS....................................................................................................4

INLET HOSE CONNECTION...........................................................................................................5

ELECTRICAL REQUIREMENTS .....................................................................................................6

OPERATING YOUR WASHER........................................................................................................7

THE FUNCTIONS OF THE CONTROL PANEL...............................................................................9

WASHING PROCEDURE AND PROGRAM SELECTION.............................................................10

MAINTENANCE .............................................................................................................................19

HOW TO CLEAN THE FILTER......................................................................................................20

REMOVING STAINS......................................................................................................................21

TROUBLE SHOOTING ..................................................................................................................22

SPECIFICATION............................................................................................................................23

PARTS AND FEATURES

The parts and features of your washer are illustrated on the page. Become familiar with all parts and features before using your washer .

Accessories

NOTE

The drawings in the book may vary from your washer model. They are designed to show the different features of all models coverd by this book, Your model may not include all features.

Hose drain Inlet hose Spanner Manual Cap holder(3EA)

ADJUSTABLE LEG

CONTROL PANEL

DOOR

DETERGENT CASE

INLET HOSE

LOWER COVER

POWER CORD

HOSE DRAIN

Save these instructions

Your safety is important to us. To reduce the risk of fire, electrical shock, or injury when using your washer adhere to the following basic precautions.

Understanding your responsibilities

• Do not use chlorine bleach and ammonia or acid(such as vinegar or rust remover) in the same wash. Hazardous fumes can form.

• Unplug power supply cord before attempting to service your washer .

• Do not wash fiberglass material. Small particles can stick to fabrics washed in following loads and cause skin irritation.

• Do not spray water on the control panel of the washer . It could cause fire or an electric shock.

• In case of the dual valve model, if you connect only cold water inlet valve, while water temperature is selected as hot or warm, there can be water leakage from unconnected water inlet valve.

• This appliance must be grounded. To avoide electrical shock, use a metal pipe for the ground connection.

• Flammable fluids (dry-cleaning solvents, kerosene, gasoline, etc.) should not be used or stored in or near your washer . Do not add flammable fluids to your wash water.These substances give off vapors that can create a fire hazard or explosion.

• After starting a cycle, do not reach into the washer until all motions stop.

• Do not tamper with the controls.

• The appliance is not intended for use by young children or infirm persons without supervision.

• If the supply cord is damaged, it must be replaced by the manufacturer , or its service agent or a similarly qualified person in order to avoid a hazard.

• If the appliance is supplied from a cord extension set or electrical portable outlet device it should be positioned so that it is not subjected to splashing or ingress of moisture.

Please ...

• Have only a qualified person install, repair , or replace parts on washer .

• Maintain washer properly.

• Protect washer from the weather and keep it where the temperature will not fall below freezing.

• Do not install the washer at a place of extremely high humidity. It could cause an electric shock or a short circuit.

• Connect washer to the correct outlet, electrical supply, water supply , and drain supply .

WASHER SAFETY

Read all instructions before using your washer

Removing transit bolts

1. Before operating the washer , remove the transit bolts(3ea) along with the rubber .

• If the bolts are not removed, it may cause heavy vibration, noise and malfunction.

2. Unscrew the 3 bolts with the spanner supplied. Keep the 3 bolts and spanner for future use.

• Whenever the appliance is transported, the transit bolts must be refitted.

3. Close the holes with the cap holders supplied.

Location of washer

• Check location where the washer will be installed. Make sure you have everything necessary for correct installation.

• Do not place or store your washer below 0°C (32°F) to avoid any damage from freezing.

• Do not place or store laundry products on top of washer at any times.

• Install the washer on the horizontal solid floor .

If the washer is installed on an unsuitable floor , it could make considerable noise, vibrate severely and cause a malfunction. If the washer is not level, adjust leg up or down for horizontal installation.

• Ventilation openings must not be obstructed by carpeting when the washer is installed on a carpeted floor .

• Leave some space (right & left : 2cm, rear : 10cm).

• In case of built-in installation, the distance between top of the washer

and bottom of upper plate should be at least 3mm.

INSTALLATION INSTRUCTIONS

Laundry

Tub

Washer

approx.

2cm

Drain Hose

The washer should be connected to the water mains using new hose sets and old hose sets should not be reused. In using only one water tap or in case of only one water inlet valve, connect the inlet hose to the cold water inlet valve. Option : Be careful not to confuse hot water inlet and cold water inlet.

For Ordinary Tap

For Screw-Shaped Tap

INLET HOSE CONNECTION

1 Pull down the collar of the

inlet hose to separate it from the water tap adapter.

2 Loosen the four screws

properly in order to fit into water tap.

3 Fit the water tap adapter

into the water tap and tighten the four screws evenly while pushing up the adapter so that the rubber packing can stick to the water tap tightly.

4 Remove the tape, and

screw connector B into connect A tightly.

5 Connect the inlet hose to

the water tap adapter by pulling down the collar of the hose end.

6 Connect the inlet hose

adapter of the hose to the water inlet of the washer by turning it clockwise to be fixed tightly.

• Please check the rubber packing present inside the inlet hose adapter of the hose.

1 Connect the inlet hose to

the water tap by screwing the connector tightly.

2 Connect the connector-

inlet supplied if necessary.

3Connect the inlet hose

adapter to the water inlet of a washer and turn it to be fixed.

*Check the packing in the inlet

TAPE

Connector B

Connector A

Connector

Rubber Packing

Hose

Connector

Rubber Packing

Hose

Connector

inlet

Connector

ELECTRICAL REQUIREMENTS

• Electrical earth is required on this washer

• If it does not fit the outlet, have a proper outlet

installed by a qualified electrician.

• Don’t earth to a gas pipe.

• Don’t change the power supply cord plug.

• Check with a qualified electrician if you are not

sure the washer is properly earthed.

WARNING

Recommended earthing method

Electrical shock hazard : Failure to follow these instructions could result in

death or serious injury.

For your personal safety , this washer must be earthed. This washer is equipped with a power supply cord ‘A’ having a earthing plug ‘B’. To minimize possible shock hazard, the cord must be plugged into a mating earthing-type wall receptacle ‘C’. If a mating wall receptacle is not available, it is the personal responsibility and obligation of the customer to have the proper earthed wall receptacle installed by a qualified electrician.

B A

Drain system

• Never forget to install drain hose before operating your washer.

• Open the packing box, and there is a drain hose inside the drum.

• Connect the drain hose to the drain outlet at the back side of the washer.

•

Top of laundry tub must be at least 60cm high and no higher than 100cm from bottom of washer.

• When installing the drain hose to tub(sink), secure it tightly with a string.

• Proper securing of the drain hose will protect the floor from damage due to water leakage.

• When the drain hose is too long, do not force it back into the washer.

This will cause abnormal noise.

Level adjustment

1 If the washer is installed on an

unsuitable floor, it could make considerable noise, vibrate and cause a malfunction.

OPERATING YOUR WASHER

2 Adjust the level of washer using adjustable legs.

• Please check if there is any gap between the four adjustable legs and the floor .

• T urning adjustable legs by the enclosed spanner, adjust the level of washer and make it sure that there is no swaying of washer .

• After the adjustment is finished, turn the fixing nuts up tightly so that the washer maintains the adjustment.

3 Make it sure that the washer does not sway when you press

down the four corners of the washer's top plate.

adjustable leg

Fixing Nut

NOTE

There should be no swaying of washer and all the adjustable legs should stick to the floor closely.

To obtain the best washing results, you must operate your washer properly. This section gives you this important information.

• Close zippers, snaps, and hooks to avoid

snagging other items. Remove pin, buckles, and other hard objects to avoid scratching the washer interior.

• Empty pockets and pull them inside out.

• Turn down cuf fs and turn synthetic knits

inside out to avoid pilling.

• Tie strings and sashes to avoid tangling.

• Treat spots and stains.

(See “Removing stains” on page 21)

Preparing clothes for washing

• Drop items into washer loosely. Items should move easily through wash water for best cleaning and wrinkle-free results.

• Load washer properly and select correct load size setting. Overloading and selecting a setting too small for the wash load can :

- Cause poor cleaning

- Increase wrinkling

- Create excessive lint

- Wear out items faster (because of pilling)

• Mix large and small items in each load. Load evenly to maintain washer balance. An unbalanced load can make the washer vibrate during spin.

• Reduce wash time when using a small load size setting. Load with only a few small items needs less wash time.

• Use a large load size setting to reduce wrinkling with permanent press clothes and some synthetic knits. These items should have more room to move in the water than heavy items. (towels, jeans)

1 Detergent case 2 Adding fabric softener

• If desired, add measured liquid fabric softener to the softener inlet.

• Pour liquid fabric softener into the dispenser using the amount recommended on the package.

• Do not exceed the maximum fill line. Overfilling can cause early dispensing of the fabric softener which could stain clothes.

• Do not open the detergent case when water is supplied.

• Avoid pouring fabric softener directly on the clothes.

Adding detergent

• Separate heavily soiled items from lightly soiled ones, even if they would normally be washed together.

• Separate dark colors from light colors, colorfast items from non-colorfast item.

Sorting

Soil (Heavy, Normal, Light) Separate clothes according to amount of soil. Color (White, Lignts, Darks) Separate white clothes from colored clothes. Lint (Lint producers, Collectors) Wash lint producers and lint collectors separately.

Main wash

Pre wash

Fabric softener

Press this switch to turn the power on or off. Operation and temporary stop is repeated as it is pressed.

When you want to change program in operating; press the “Start/Hold” button →Select the program that you want to change →press the “Start/Hold” button again.

You can select the course you want, and each lamp is turned on when that course is selected. For the more detailed information, please refer to the page 11~18.

It can be used to adjust temperature of water according to types of the load to be washed. As the button is pressed, temperature of water is selected by Cold → 30˚C →40˚C → 60˚C → 95˚C

By pressing the spin button, the spin speed can be chosen. Rinse Hold •

Is selected by pressing the spin button repeatedly. This function leaves clothes in the machine; suspended in the water after a rinse without entering into spin.

• To proceed through to a drain or spin, after the Rinse Hold function is completed, use spin button.

No spin • If no spin is selected, the washer stops after draining water. Crease Care • If you want to prevent crease, select this button with spin speed.

Rinse+ • Is used to add a rinse, which may assist in removing traces of detergent residue.

• By selecting Rinse+ function, the rinse time and the rinse water are increased.

Pre-Wash • The washer operates one additional wash and spin before the main wash.

• If the laundry is heavily soiled, Pre-Wash course is effective.

• Pre-Wash is available in Cotton and Synthetic programs.

All courses have pre-set washing times, but Time Save decreases it to 10 minutes. Each time this button is pressed the watch icon is repeated on and off. When it is on, the Time Save function is set. Time Save is available in Cotton, Eco and Synthetic programs.

It can be used to pre-engage time for wash. Use this function when you want to protect any accident occurring from handling of washer by a child.

During an operation of washer, press ‘Time Save’ and ‘Time Delay’ buttons simultaneously. In Child Lock mode, no button functions except Power button. In Child Lock mode, press ‘Time Save’ and ‘Time Delay’ buttons simultaneously like setting Child Lock and Child Lock is cancelled. To change to the desirde program, while in Child Lock mode;

1. Press both the Time save and Time delay buttons together once again.

2. Press the Start/Hold button.

3. Select the desired program and press the Start/Pause button again.

THE FUNCTIONS OF THE CONTROL PANEL

* The child lock can be set at any time and it is automatically cancelled when operational errors

occur. Also Child Lock works also when power is off.

Change the desired program

1. COTTON IS AUTOMATICALLY SELECTED UPON POWER ON

• Press the Power button to start.

• Press the Start/Hold button

• Initial condition

- Program : Cotton

- Wash : main wash

- Rinse : 3 times

- Spin : 800 rpm

- Water temperature : 40˚C

W ASHING PROCEDURE AND PROGRAM SELECTION

2. MANUAL SELECTING

• Press the Power button to start

• Select the conditions which you want to use by turning the program dial and pressing each button.

• Press the Start/Hold button.

3. RESERVED WASHING

• Reservation can be made from 2 hours to 12 hours. example) To make reservation to complete washing in 8 hours.

- Procedure to press the button.

* Each pressing of the button advances time delay by one hour.

• Now the reservation is made.

• If you want to check the selected program, press the “Start/Hold” button again.

• Preparing washing before starting “Time Delay”;

- Turn on the water tap

- Load laundry and close the door

- Place the detergent and fabric softener in the detergent case.

• To cancel the time delay, press the Power button.

ajust to "8"

select the program or manual

4. FUNCTION

• Recommended programs according to the laundry type

• Pre Wash : If the laundry is heavily soiled, “Pre Wash” program is recommended.

Pre Wash is available in Cotton and Synthetic programs.

• Rinse+ : Used to introduce an additional rinse, which may assist in removing traces of detergent residue.

• Eco : By selecting Eco function, the water temperature is lowered and washing time is increased.

So you can economize your consumption of heating energy.

Fabirc

Type

First check if laundry is machine washable.(white cotton, linen towel and sheets..)

Colorfast garments (shirts, night dresses, pajamas..) and lightly soiled white cottons (underwear..)

60˚C

(95˚C)

Pre Wash

Rinse+

Crease Care

Rating

40˚C

(60˚C, 30˚C)

Pre Wash

Rinse+

Crease Care

Rating

Laundry type is the same as Cotton.

60˚C

Pre Wash

Rinse+

Crease Care

Rating

Proper Temp.

Option

Maximum

Load

Program

Cotton

Eco

Polyamide, Acrylic, Polyester

40˚C

(60˚C, 30˚C)

Pre Wash

Rinse+

Crease Care

Less than

1.5kg

Synthetic

Delicate laundry easily damaged (silk, curtains..)

Cold

Rinse+

Crease Care

Less than

1.0kg

Delicate

Machine washable woolens with pure new wool only.

Cold

Rinse+

Crease Care

Less than

1.0kg

Wool

“Hand wash” marked delicate and wool laundry

Cold

(30˚C)

Rinse+

Crease Care

Less than

1.0kg

Hand Wash

Colored laundry which is lightly soiled fast.

30˚C

(Cold, 40˚C)

Rinse+

Crease Care

Less than

1.0kg

Quick

* COTTON PROGRAM

Note

• If you want to change the setting during operation, press the Start/Hold button to hold the operation and press the button you want.

• ‘30’, ‘40’, ‘60’ and ‘95’ ˚C washing temperatures are selectable with Cotton program.

• ‘Prewash’, ‘Rinse+’, and ‘Crease Care’ wash options are selectable with Cotton program.

Caution!

• If you select washing temperature ‘95’ ˚C, some cold water is supplied before the drain of main wash. This is to protect the user from the hazard of burn injury by lowering the temperature of hot wash water instead of directly draining it. Therefore this is not a malfuction. (Be careful with the draining water, since it can be still hot although the temperature is lowered.)

Put the laundry in to the drum. Put detergent and softener into the detergent case. Then close the door.

•

Put detergent into the main wash and prewash compartments in the detergent case. Softener should be below the ‘MAX’ level.

•

Put detergent into the pre wash compartment only if you want to add prewash.

•

When you want to use bleach, put it into the main wash compartment with detergent.

Press the Power button.

•

The LED shows only ‘---’ and all Program Lights turn on.

Select the ‘Cotton’ program using program selection dial.

•

If you press Start/Hold button after power button without selecting program, the

‘Cotton’ program is selected as default program.

•

Washing temperature ‘40’ ˚C, spin ‘800’ rpm and rinse ‘3’ times are selected automatically.

•

If you want to change washing temperature, the spin velocity or add wash options (Rinse+, Crease Care), press each button.

Press Start/Hold button.

•

The Door is locked. By sensing the weight of laundry and supplying wash water, The appliance starts washing.

* ECO PROGRAM

Note

• If you want to change the setting during operation, press the Start/Hold button to hold the operation and press the button you want.

• Only ‘60’ ˚C washing temperature is selectable with Eco program.

• Only ‘Rinse+’ and ‘Crease Care’ of all wash options are selectable with Eco program.

Put the laundry in the drum. Put detergent and softener into the detergent case. Then close the door.

•

Put detergent into the main wash and prewash compartments in the detergent case. Softener should be below the ‘MAX’ level.

•

Put detergent into the pre wash compartment only if you want to add prewash.

•

When you want to use bleach, put it into the main wash compartment with detergent.

Press the Power button.

•

The LED shows only ‘---’ and all Program Lights turn on.

Select the ‘Eco’ program using program selection dial.

•

Washing temperature ‘60’ ˚C, spin ‘800’ rpm and rinse ‘3’ times are selected automatically.

•

If you want to change the spin velocity or add wash options (Rinse+, Crease Care), press each button.

Press Start/Hold button.

•

The Door is locked. By sensing the weight of laundry and supplying wash water, The appliance starts washing.

* SYNTHETIC PROGRAM

Note

• If you want to change the setting during operation, press the Start/Hold button to hold the operation and press the button you want.

• Only ‘30’, ‘40’ and ‘60’ ˚C washing temperatures are selectable with Synthetic program.

• ‘Prewash’, ‘Rinse+’, and ‘Crease Care’ wash options are selectable with Synthetic program.

• The appropriate amount of laundry for Synthetic program is below 1.5kg.

Put the laundry in the drum. Put detergent and softener into the detergent case. Then close the door.

•

Put detergent into the main wash and prewash compartments in the detergent case. Softener should be below the ‘MAX’ level.

•

Put detergent into the pre wash compartment only if you want to add prewash.

•

When you want to use bleach, put it into the main wash compartment with detergent.

Press the Power button.

•

The LED shows only ‘---’ and all Program Lights turn on.

Select the ‘Synthetic’ program using program selection dial.

•

Washing temperature ‘40’ ˚C, spin ‘800’ rpm and rinse ‘3’ times are selected automatically.

•

If you want to change washing temperature, the spin velocity or add wash options (Prewash, Rinse+, Crease Care), press each button.

Press Start/Hold button.

•

The Door is locked. By sensing the weight of laundry and supplying wash water, The appliance starts washing.

* DELICATE PROGRAM

Note

• If you want to change the setting during operation, press the Start/Hold button to hold the operation and press the button you want.

• Only ‘cold’ of washing temperature is selectable with Delicate program.

• ‘1000’ rpm of spin velocity is NOT selectable with Delicate program.

• Only ‘Rinse+’ and ‘Crease Care’ wash options are selectable with Delicate program.

• The appropriate amount of laundry for Delicate program is below 1.0kg.

Put the laundry in the drum. Put detergent and softener into the detergent case. Then close the door.

•

Put detergent into the main wash and prewash compartments in the detergent case. Softener should be below the ‘MAX’ level.

•

Put detergent into the pre wash compartment only if you want to add prewash.

•

When you want to use bleach, put it into the main wash compartment with detergent.

Press the Power button.

•

The LED shows only ‘---’ and all Program Lights turn on.

Select the ‘Delicate’ program using program selection dial.

•

Washing temperature ‘Cold’, spin ‘400’ rpm and rinse ‘2’ times are selected automatically.

•

If you want to change the spin velocity or add wash options (Rinse+, Crease Care), press each button.

Press Start/Hold button.

•

The Door is locked. By sensing the weight of laundry and supplying wash water, The appliance starts washing.

* WOOL PROGRAM

Note

• If you want to change the setting during operation, press the Start/Hold button to hold the operation and press the button you want.

• Only ‘Cold’ washing temperature is selectable with Wool program.

• ‘1000’ rpm of spin velocity is NOT selectable with Hand program in order to protect damage on laundry.

• Only ‘Rinse+’ and ‘Crease Care’ wash options are selectable with Wool program.

• The appropriate amount of laundry for Wool program is below 1.0kg.

• Use only special detergent for wool.

(Since special neutral detergent for wool creates a lot of bubbles, use appropriate amount).

Put the laundry in the drum. Put detergent and softener into the detergent case. Then close the door.

•

Put detergent into the main wash and prewash compartments in the detergent case. Softener should be below the ‘MAX’ level.

•

Put detergent into the pre wash compartment only if you want to add prewash.

•

When you want to use bleach, put it into the main wash compartment with detergent.

Press the Power button.

•

The LED shows only ‘---’ and all Program Lights turn on.

Select the ‘Wool’ program using program selection dial.

•

Washing temperature ‘Cold’, spin ‘400’ rpm and rinse ‘2’ times are selected automatically.

•

If you want to change the spin velocity or add wash options (Rinse+, Crease Care), press each button.

Press Start/Hold button.

•

The Door is locked. By sensing the weight of laundry and supplying wash water, The appliance starts washing.

* HAND WASH

Note

• If you want to change the setting during operation, press the Start/Hold button to hold the operation and press the button you want.

• Only ‘Cold’ and ‘30’ ˚C washing temperatures are selectable with Hand Wash program.

• ‘1000’ rpm of spin velocity is NOT selectable with Hand program.

• Only ‘Rinse+’ and ‘Crease Care’ wash options are selectable with Hand Wash program.

• Use Hand Wash program for the laundry that is marked ‘Hand wash’ in the care label.

Put the laundry in the drum. Put detergent and softener into the detergent case. Then close the door.

•

Put detergent into the main wash and prewash compartments in the detergent case. Softener should be below the ‘MAX’ level.

•

Put detergent into the pre wash compartment only if you want to add prewash.

•

When you want to use bleach, put it into the main wash compartment with detergent.

Press the Power button.

•

The LED shows only ‘---’ and all Program Lights turn on.

Select the ‘Hand Wash’ program using program selection dial.

•

Washing temperature ‘Cold’, spin ‘400’ rpm and rinse ‘3’ times are selected automatically.

•

If you want to change the washing temperature, spin velocity or add wash options (Rinse+, Crease Care), press each button.

Press Start/Hold button.

•

The Door is locked. By sensing the weight of laundry and supplying wash water, The appliance starts washing.

* QUICK 30

Note

• If you want to change the setting during operation, press the Start/Hold button to hold the operation and press the button you want.

• Only ‘Cold’, ‘30’ ˚C and ‘40’ ˚C washing temperatures are selectable with Quick 30 program.

• Only ‘Rinse+’ and ‘Crease Care’ wash options are selectable with Quick 30 program.

Put the laundry in the drum. Put detergent and softener into the detergent case. Then close the door.

•

Put detergent into the main wash and prewash compartments in the detergent case. Softener should be below the ‘MAX’ level.

•

Put detergent into the pre wash compartment only if you want to add prewash.

•

When you want to use bleach, put it into the main wash compartment with detergent.

Press the Power button.

•

The LED shows only ‘---’ and all Program Lights turn on.

Select the ‘Quick’ program using program selection dial.

•

Washing temperature ‘30’ ˚C, spin ‘800’ rpm and rinse ‘2’ times are selected automatically.

•

If you want to change the washing temperature, spin velocity or add wash options (Rinse+, Crease Care), press each button.

Press Start/Hold button.

•

The Door is locked. By sensing the weight of laundry and supplying wash water, The appliance starts washing.

MAINTENANCE

Proper care of your washer can extend its life. This section explains how to care for your washer properly and safely.

Cleaning your washer

Winter storage or moving care

Install and store your washer where it will not freeze. Because some water may stay in the hoses, freezing can damage your washer. If you store or move your washer during freezing weather, winterize it.

Non-use or vacation care

Operate your washer only when you are at home. If you are on vacation or don’t use your washer for an extended period of time, you should:

• Unplug the power supply cord or turn off eletrical power to the washer.

• Turn of f the water supplier to the washer.

This helps avoid accidental flooding (due to a water pressure surge) while you are away.

Wipe up detergent, bleach, and other spills with a soft, damp cloth or sponge as they occur. Occasionally wipe the outside of the washer to keep its looking like new one.

Clean interior with 250ml of chlorine bleach mixed with 500ml of detergent. Run washer through a complete cycle. Repeat this process if necessary .

Exterior Interior

• Turn of f water faucet.

• Disconnect and drain water inlet hoses.

• Run washer on a drain and spin setting (see

page 10) for 1 minute.

• Unplug the power supply cord.

• Flush water pipes and hoses.

• Reconnect water inlet hoses.

• Turn on water faucet.

• Reconnect power supply cord.

To winterize washer To use washer again

Do not put sharp or metal object in your washer, or they can damage the finish. Check all pockets for pins, clips, money , bolts, nuts, etc. Do not lay these objects in your washer after emptying pockets.

HOW TO CLEAN THE FILTER

Cleaning the water inlet filter

• Clean the filter when water leaks from the water inlet.

Cleaning the drain filter

• This drain filter is used to screen the foreign stuf fs such as threads, coins, pins, buttons etc..

• If the drain filter is not cleaned at proper time(every 10 times of use), drain problem could be

caused.

CAUTION : Be careful when draining if the water is hot.

Cleaning the detergent case

*After a while detergent and fabric softeners leave a deposit in the case;

- It should be cleaned from time to time with a jet of running water.

- If necessary it can be removed completely from the machine by pressing the catch downwards and by pulling it out.

- To facilitate cleaning, the upper part of the fabric softener compartment can be removed.

*Detergent can also accumulate inside the recess which should be

cleaned occasionally with a brush.

*Once you have finished cleaning, replace the case and run a rinse

cycle without laundry.

1 Pull the power

plug out before cleaning it.

2 Turn off the water

supply to the washer and separate the inlet hose.

3 Pull the inlet filter

out.

4 Remove the dirt

from the inlet filter with a brush.

1. Open the lower cover(1) by using a coin. Remove the cap hose(2) to pull out the hose.

Unplug the cap hose(2), allowing the water to flow out. At this time use a vessel to prevent water flowing on to the floor. When water does not flow any more, turn the pump filter(3) open to the left.

3. Remove any foreign material from the pump filter(3). After cleaning, turn the pump filter clockwise and insert the cap hose(2) to the original place. Close the lower cover.

100

Stained, heavily-soiled, or greasy items may need to be prewashed or soaked for best results. Soaking helps remove protein-type stains like blood, milk or grass. Prewashing helps loosen soil before washing.

Stain removal rules

• Use warm water for soaking or prewashing stained laundry. Hot water can set stains.

• Most stains are easier to remove when they are fresh.

• Before treating any stain, find out what kind of stain it is, how old the stain is, what kind of

fabric it is, and whether the fabric is colorfast. (Check the care label)

• Washing and drying can set some stains.

• Start with cold or warm water. Hot water can set some stains.

• When bleach is recommended, use a bleach that is safe for the fabric.

• Put the stained area face down on a paper towel or white cloth. Apply the stain remover to the

back of the stain. This forces the stain off fabric instead of through it.

Stain removal guide

REMOVING STAINS

Rinse immediately in COLD water. If stain remains, soak in cold water with an enzyme prewash.

Use ice in plastic bag to harden the gum. Scrape off what you can and the sponge with white spirits.

Sponge with COLD water and soak in an enzyme prewash. If stains persist, rub in a little detergent and rinse in cold water.

Blot up quickly and rinse out in COLD water. Rub in a little detergent and wash in the maximum temperature allowed for the fabric type.

Rinse in COLD water and wash normally. If stain is still apparent, sponge with white spirits.

Rub affected area with white vinegar and then rinse out in COLD water. Sponge with white spirits. Treat stiffened areas with enzyme prewash.

Soak in a COLD enzyme prewash, rinse and wash normally. Rub affected area with bar soap and wash normally. Treat as soon as possible by sponging with COLD water.

Rub a little detergent on the stain and wash normally. Sponge with white spirits.

Rub in an enzyme prewash and wash as normally. Lay the affected area face down on an absorbent cloth and work from the back.

Sponge with white spirits or dry cleaning fluid. Wash normally. Apply lemon juice and salt and place in the sun. Wash normally. Sponge with white methylated spirits and wash normally. Wash in WARM water and detergent.

Moisten area with lemon juice, dry in the sun and wash normally. If stain persists and the fabric allows, use a bleach.

Brush off any dry mud. Rinse in cold water. If stain persists rub in a little detergent and wash normally.

Scrape off any fresh paint and sponge with a non flammable dry cleaning fluid and wash normally.

Treat while still wet, rinse in WARM water and wash normally. Dampen a cloth with hydrogen peroxide, lay it over the affected area and press

with a fairly hot iron.

Blood Chewing gum Cocoa, Chocolate Coffee

Cream/Milk Ice cream

Deodorant

Egg Fabric/Softener Fruit stains

Grass Grease and oil Iron or rust

Lipstick Mildew

Mud Paint-oil based Paint-water based

Scorch marks

ST AIN TO REMOVE

TROUBLE SHOOTING

Most problems are easily solved if you understand the cause. Check the following list for problem before calling for service. If error mode such as IE, OE, UE were displayed on the control part, in this case, how to solve these problem is first open and close the door , and then press START/HOLD button.

• The washer will not operate at all.

• Water is not supplied

Error display

• The washer will not drain

Error display

• The washer will not spin

• Vibrating and too noisy

Error display

These cases are not malfunctions;

• The sound “wing” heard during water supply is the operating sound made by the water inlet valve.

• The sound “sha” heard in stopping the tub is the sound that comes from the autobalbancer of the tub.

• Is there a power failure?

• Is the power cord correctly connected to an electric outlet?

• Did you turn on the power?

• Did you press Start/Hold button?

• Is there correct amount of laundry in the washer .

• Did you connect the inlet hose and open the water tap?

• Is the inlet hose or the water tap frozen?

• Is the water supply shot off?

• Is there any foreign matter blocking up the inlet hose filter?

• Is the drain hose frozen or blocked up by dirt?

• Is the drain hose kinked or deformed?

• Is the end of the drain hose immersed in water?

• Is there excessive dirt inside the drain filter?

• Is the clothes in the drum collected on one side?

• Is the washer installed on an uneven floor or is the vibration

serious?

• Is the door open? (The lamp “” will light up in this case.)

• Is the washer installed on an uneven floor?

• Have all the transit bolts removed?

PROBLEM CHECK POINT

Dimension (mm)

Maximum mass of textile (kg)

Unit Weight (kg)

Standard Water Consumption

Spin Speed (RPM)

Operating Water Pressure

595 x 540 x 850 (WxHxD)

6.0

64(Net) / 68(Gross)

No Spin/400/800/1000 No Spin/400/800/1200

0.03MPa ~ 0.8MPa (0.3kgf/cm

~ 8kgf/cm2)

MODEL DWD-F1011/F1012/F1013 DWD-F1211/F1212/F1213

SPECIFICATION

WIRING DIAGRAM

English

Disposal of Used Electrical & Electronic Equipment

The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this equipment at your applicable collection point for the recycling of electrical & electronic equipments waste. In the European Union and Other European countries which there are separate collection systems for used electrical and electronic product. By ensuring the correct disposal of this product, you will help prevent potentially hazardous to the environment and to human health, which could otherwise be caused by unsuitable waste handling of this product. The recycling of materials will help conserve natural resources. Please do not therefore dispose of your old electrical and electronic equipment with your household waste. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Português

Eliminação de Equipamento Eléctrico e Electrónico Usado

O símbolo no aparelho, nos seus acessórios ou na embalagem indica que este aparelho não deve ser tratado como resíduos domésticos. Deixe deste aparelho no ponto de recolha de material eléctrico e electrónico para reciclagem mais perto de si. Na União Europeia e noutros países europeus existem sistemas de recolha separada para produtos eléctricos e electrónicos usados. Garantindo uma eliminação correcta deste aparelho, ajudará a evitar possíveis danos ambientais e/ou pessoais, que um incorrecto tratamento do aparelho usado poderia provocar. A reciclagem de materiais ajuda a conservar os recursos naturais. Por isso, não deite fora os aparelhos eléctricos e electrónicos junto com os seus resíduos domésticos. Para informação detalhada sobre a reciclagem deste aparelho, contacte a sua Câmara Municipal, o seu serviço de recolha de lixo ou a loja onde comprou o aparelho.

French

Traitement des appareils électriques et électroniques en fin de vie (applicable dans les pays de l’union européenne et aux autres pays européens disposant de systèmes de collecte sélective).

Ce symbole, apposé sur le produit ou sur son emballage, indique que ce produit ne doit pas être traité avec les dechets ménagers. Il doit être remis à un point de collecte approprié pour le recyclage des équipements électriques et électroniques. En s’assurant que ce produit est bien mis au rebus de manière appropriée, vous aiderez à prévenir les conséquenses négatives potentielles pour l’environnement et la santé humaine. Le recyclage des matériaux aidera à conserver les ressources naturelles. Pour toute iformation supplémentaire au sujet du recyclage de ce produit, vous pouvez consulter votre municipalité, votre déchetterie ou le magasin où vous avez acheté le produit.

Deutsch

Entsorgung von gebrauchten elektrischen und elektronischen Geräten (Anzuwenden in den Ländern der Europäischen Union und anderen europäischen Ländern mit einem separaten Sammelsystem für diese Geräte)

Das Symbol auf dem Produkt oder seiner Verpackung weist darauf hin, dass dieses Produkt nicht als normaler Haushaltsabfall zu behandeln ist, sondern an einer Annahmestelle für das Recycling von elektrischen und elektronischen Geräten abgegeben werden muss. Durch Ihren Beitrag zum korrekten Entsorgen dieses Produkts schützen Sie die Umwelt und die Gesundheit Ihrer Mitmenschen. Umwelt und Gesundheit werden durch falsches Entsorgen gefährdet. Materialrecycling hilft den Verbrauch von Rohstoffen zu verringern. Weitere Informationen über das Recycling dieses Produkts erhalten Sie von Ihrer Gemeinde, den kommunalen Entsorgungsbetrieben oder dem Geschäft, in dem Sie das Produkt gekauft haben.

Español

Eliminación de equipamiento eléctrico y electrónico usado

Este símbolo en el producto, sus accesorios o embalaje indica que el producto no debe tratarse como un residuo doméstico. Deshágase de este equipamiento en su punto de recogida más cercano para el reciclaje de residuos eléctricos y electrónicos. En la Unión Europea y otros países europeos existen diferentes sistemas de recogida de productos eléctricos y electrónicos usados. Al asegurar la correcta eliminación de este producto ayudará a evitar riesgos potenciales para el medio ambiente y la salud de las personas que podrían tener lugar si el producto no se eliminara de forma adecuada. El reciclaje de materiales ayudará a conservar los recursos naturales. Por consiguiente, no elimine equipamiento eléctrico y electrónico usado junto con residuos domésticos. Para información más detallada acerca del reciclaje de este producto, póngase en contacto con su oficina municipal, el servicio de eliminación de residuos domésticos o el establecimiento donde adquirió el producto.

Nederlands

Verwijdering van Oude Elektrische en Elektronische Apparaten (Toepasbaar in de Europese Unie en andere Europese landen met gescheiden ophaalsystemen)

Het symbool op het product of op de verpakking wijst erop dat dit product niet als huishoudafval mag worden behandeld. Het moet echter naar een plaats worden gebracht waar elektrische en elektronische apparatuur wordt gerecycled. Als u ervoor zorgt dat dit product op de correcte manier wordt verwijderd, voorkomt u mogelijk voor mens en milieu negatieve gevolgen die zich zouden kunnen voordoen in geval van verkeerde afvalbehandeling. De recyclage van materialen draagt bij tot het vrijwaren van natuurlijke bronnen. Voor meer details in verband met het recyclen van dit product, neemt u het best contact op met de gemeentelijke instanties, het bedrijf of de dienst belast met de verwijdering van huishoudafval of de winkel waar u het product hebt gekocht.

»»

esky

Likvidace pouûûit˝˝ch elektrick˝˝ch a elektronick˝˝ch za¯¯ízení

Tento symbol na v˝robku, jeho p¯ísluöenství nebo obalu oznaËuje, ûe s tímto v˝robkem nesmí b˝t zacházeno jako s domovním odpadem. V˝robek zlikvidujte jeho p¯edáním na sbÏrné místo pro recyklaci elektrick˝ch a elektronick˝ch za¯ízení. V zemích evropské unie a jin˝ch evropsk˝ch zemích existují samostatné sbÏrné systémy pro shromaûÔování pouûit˝ch elektrick˝ch a elektronick˝ch v˝robk˘. ZajiötÏním jejich správné likvidace pom˘ûete prevenci vzniku potenciálních rizik pro ûivotní prost¯edí a lidské zdraví, která by mohla vzniknout nesprávn˝m zacházením s odpady. Recyklace odpadov˝ch materiál˘ napomáhá udrûení p¯írodních zdroj˘ surovin - z uvedeného d˘vodu nelikvidujte prosím vaöe stará elektrická a elektronická za¯ízení s domovním odpadem. Pro získání podrobn˝ch informací k recyklaci tohoto v˝robku kontaktujte prosím pracovníka ochrany ûivotního prost¯edí místního (mÏstského nebo obvodního) ú¯adu, pracovníky sbÏrného dvora nebo zamÏstnance prodejny, ve které jste v˝robek zakoupili.

Slovensky

Likvidácia pouûûit˝˝ch elektrick˝˝ch a elektronick˝˝ch zariadení

Tento symbol na v˝robku, jeho prísluöenstve alebo obale oznaËuje, ûe sa s t˝mto v˝robkom nesmie zaobchádzaù ako s domov˝m odpadom. V˝robok zlikvidujte jeho odovzdaním na zbernom mieste pre recykláciu elektrick˝ch a elektronick˝ch zariadení. V krajinách európskej únie a v in˝ch európskych krajinách existujú samostatné zberné systémy pre zhromaûÔovanie pouûit˝ch elektrick˝ch a elektronick˝ch v˝robkov. Zaistením ich správnej likvidácie pomôûete prevencii vzniku potenciálnych rizík pre ûivotné prostredie a æudské zdravie, ktoré by mohli vzniknúù nesprávnym zaobchádzaním s odpadmi. Recyklácia odpadov˝ch materiálov napomáha udrûaniu prírodn˝ch zdrojov surovín – z uvedeného dôvodu nelikvidujte prosím vaöe staré elektrické a elektronické zariadenia s domov˝m odpadom. Pre získanie potrebn˝ch informácií k recyklácii tohto v˝robku kontaktujte prosím pracovníka ochrany ûivotného prostredia miestneho (mestského Ëi obvodného) úradu, pracovníkov zberného dvora alebo zamestnancov predajne, v ktorej ste v˝robok zakúpili.

Magyar

Feleslegessé vált elektromos és elektronikus készülékek hulladékként való eltávolítása (Használható az Európai Unió és egyéb európai országok szelektív hulladékgy˚˚jtési rendszereiben)

Ez a szimbólum a készüléken vagy a csomagolásán azt jelzi, hogy a terméket ne kezelje háztartási hulladékként. Kérjük, hogy az elektromos és elektronikai hulladék gy˚jtésére kijelölt gy˚jtıhelyen adja le. A feleslegessé vált termékének helyes kezelésével segít megelızni a környezet és az emberi egészség károsodását, mely bekövetkezhetne, ha nem követi a hulladék kezelés helyes módját. Az anyagok újrahasznosítása segít a természeti erıforrások megırzésében. A termék újrahasznosítása érdekében további információért forduljon a lakóhelyén az illetékesekhez, a helyi hulladékgy˚jtı szolgáltatóhoz vagy ahhoz az üzlethez, ahol a terméket megvásárolta.

Slovensko

Oddaja stare elektri

ËËnnee iinn eelleekkttrroonnsskkee oopprreemmee ((vveelljjaavvnnoo vv eevvrrooppsskkii uunniijjii iinn oossttaalliihh eevvrrooppsskkiihh ddrrûû

avah s sistemom zbiranja loËËenih odpadkov)

»e se na izdelku ali a njegovi embalaûi nahaja ta simbol, pomeni, da z izdelkom ne smete ravnati enako kot z drugimi gospodinjskimi odpadki. Morate ga oddati na ustrezno zbirno mesto za recikliranje elektriËne in elektronske opreme. S pravilno oddajo tega izdelka boste pomagali prepreËiti negativne posledice na okolje in zdravje ljudi, do katerih bi priölo v primeru neustreznega ravnanja ob odstranitvi tega izdelka. Recikliranje materiala bo pripomoglo k ohranjevanju naravnih virov. Podrobnejöe informacije o reciklitanju tega izdelka lahko dobite pri lokalni mestni upravi, sluûbi oddajanja gospodinjskih odpadkov ali v trgovini, kjer ste izdelek kupili. Odpadno elektriËno in elektronsko opremo lahko oddate brezplaËno tudi distributerju neposredno ob dobavi elektriËne oz. elektronske opreme.

Poland

Utylizacja niepotrzebnego sprz´´tu elektrycznego i elektronicznego

Taki symbol na produkcie lub na jego opakowaniu oznacza, Œe produkt nie moŒe byç traktowany jako odpad komunalny, lecz powinien byç dostarczony do odpowiedniego punktu zbiórki sprz´tu elektrycznego i elektronicznego, w celu przerobu i odzysku odpadów. W krajach Unii Europejskiej i w pozosta¬ych krajach europejskich så odr´ bne systemy segregacji odpadów przeznaczone do utylizacji sprz´ tu elektrycznego i elektronicznego. Przez takie pro ekologiczne zachowanie zapobiegajå Pa˜stwo potencjalnym negatywnym wp¬ywom na ßrodowisko naturalne oraz na zdrowie ludzi, jakie mog¬yby wyståpiç w przypadku niew¬aßciwego procesu sk¬adowania tego produktu. Przez zagospodarowanie materia¬ów oszcz´dzamy równieŒ surowce naturalne. Aby uzyskaç bardziej szczegó¬owe informacje na temat przerobu i odzysku materia¬ów elektronicznych z tego produktu, prosz´ skontaktowaç si´ z urz´dem miasta lub gminy, lokalnym zak¬adem utylizacji sprz´tu elektrycznego i elektronicznego lub ze sklepem, w którym produkt zosta¬ zakupiony.

Italiano

Trattamento del dispositivo elettrico od elettronico a fine vita (Applicabile in tutti i paesi dell’Unione Europea e in quelli con sistema di raccolta differenziata)

Questo simbolo sul prodotto o sulla confezione indica che il prodotto non deve essere considerato come un normale rifiuto domestico, ma deve invece essere consegnato ad un punto di raccolta appropriato per il riciclo di apparecchi elettrici ed elettronici. Assicurandovi che questo prodotto sia smaltito correttamente, voi contribuirete a prevenire potenziali conseguenze negative per l’ambiente e per la salute che potrebbero altrimenti essere causate dal suo smaltimento inadeguato. Il riciclaggio dei materiali aiuta a conservare le risorse naturali. Per informazioni piú dettagliate circa il riciclaggio di questo prodotto, potete contattare l’ufficio comunale, il servizio locale di smaltimento rifiuti oppure il negozio dove l’avete acquistato.

Suomi

Käytöstä poistetun sähkö-ja elektroniikkalaitteen hävitys (Euroopan Unioni ja muiden Euroopan maiden keräysjärjestelmät)

Symboli, joka on merkitty Tuotteeseen tai sen pakkaukseen, osoittaa, että tätä tuotetta ei saa käsitellä talousjätteenä. Tuote on sen sijaan luovutettava sopivaan sähkö-ja elektroniikkalaitteiden kierrätyksestä huolehtivaan keräyspisteeseen. Tämän tuotteen asianmukaisen hävittämisen varmistamisella autetaan estämään sen mahdolliset ympäristöön ja terveyteen kohdistuvat haittavaikutukset, joita voi aiheutua muussa tapauksessa tämän tuotteen epäasianmukaisesta jätekäsittelystä. Materiaalien kierrätys säästää luonnonvaroja. Tarkempia tietoja tämän tuotteen kierrättämisestä saa paikallisesta kunnantoimistosta.

Svenska

Omhändertagande av gamla elektriska och elektroniska produkter (Användbar i den Europeiska Unionen och andra Europeiska länder med separata insamlingssystem)

Symbolen på produkten eller emballaget anger att produkten inte får hanteras som hushållsavfall. Den skall i stället lämnas in på uppsamlingsplats för återvinning av el- och elektronikkomponenter. Genom att säkerställa att produkten hanteras på rätt sätt bidrar du till att förebygga eventuellt negativa miljöoch hälsoeffekter som kan uppstå om produkten kasseras som vanligt avfall. Återvinning av material hjälper till att bibehålla naturens resurser. För ytterligare om återvinning bör du kontakta lokala myndigheter eller sophämtningstjänst eller affären där du köpte varan.

Norsk

Avhending av gamle elektriske og elektroniske apparater (gjelder i den Europeiske Unionen og andre europeiske land med separat innsamlingssystem)

Dette symbolet på produktet eller innpakningen indikerer at dette produktet ikke må håndteres som husholdningsavfall. I stedet skal det leveres inn til spesielt innsamlingspunkt for gjenvinning av det elektriske og elektroniske utstyret. Ved å sørge for at dette produktet avhendes på korrekt måte, vil du hjelpe til med å forhindre potensielle negative påvirkninger på miljøet og helse, som ellers kan være resultatet av feilaktig avfallshåndtering av dette produktet. Gjenvinning av disse materialene vil hjelpe til med å ta vare på våre maturressurser. For mer informasjon om gjenvinning av dette produktet, kan du kontakte lokale myndigheter.

Dansk

Håndtering af udtjente elektriske og elektroniske produkter (Gælder for den Europæiske Union og andre europæiske lande med separate indsamlingssystemer)

Dette symbol på produktet eller emballagen angiver, at produktet ikke må behandles som husholdningsaffald. Det skal i stedet indleveres på en deponeringsplads specielt indrettet til modtagelse og oparbejdning af elektriske og elektroniske produkter. Ved at sikre at produktet bortskaffes korrekt, forebygges de eventuelle negative miljø-og sundhedsskadelige påvirkninger, som en ukorrekt affaldshåndtering af produktet kan forårsage. Genindvinding af materialer vil medvirke til at bevare naturens ressourcer. Yderligere information om genindvindingen af dette produkt kan fås hos myndighederne, det lokale renovationsselskab eller butikken, hvor produktet blev købt.

담 당 박선정님 TEL MODEL

DWD-F1011N/1012N/1013N/1211N/1212N/1213N’S

BUYER

((DDEEEERR))--불불가가리리향향

_DWD-F1011/1012/1013/1211/1212/1213’S

1차 6차 2차 7차

일 정 3차 8차

4차 9차 5차 10차

제판

인인쇄쇄 동동일일 규격 MEMO

연연락락처처

VVIISSIIOONN

담담 당당

전지현

TEL: 730-0660 FAX: 730-3788

05.5.19-영어(Basic)으로 작업함

VISION CREATIVE, INC.

서울 종로구 통의동 6번지

이룸빌딩4층

ABOUT THIS MANUAL

Daewoo DWD-F1011, 1212, 1213, 1211, 1013 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual