Dacor DMW2420S Planning Guide

DMW2420S, AMTK, AOMTK
Document # PG12-007 Revised 01/24/11 Page 1/1
PRELIMINARY
Microwave Oven (Stainless Steel)
and Built-In Trim Kits
All tolerances: +1/16”, -0, (+1.6 mm, -0) unless otherwise stated
19 1/8”
24”
Shipping weight: 46 lbs.
Circuit required: 120 Vac, 15 Amp. dedicated, grounded, 3-prong electrical outlet
Total connected load: 13.0 Amp. @ 120 Vac, 60 Hz.
Interior dimensions: 10 1/2" H x 17 3/8" W x 18 5/8" D, interior walls are recessed
13 3/8”
WARNING
• Observe all governing codes and ordinances during planning and installation. Contact your local building department for further information.
• This appliance must be installed in accordance with the accompanying installation instructions.
A
B
PLANNING
GUIDE
1”
(2.5 cm)
18 1/8”
(46.0 cm)
DMW2420 MICROWAVE SPECIFICATIONS
7/8” Min.*
(2.2 cm)
4” **
(10.2 cm)
4” **
(10.2 cm)
* Minimum spacing: Includes additional space to avoid scraping/vibration. ** 120 Vac 15 Amp. 3-prong electrical outlet must be located in one of the shaded areas shown unless interior cabinet depth is more than 21" (53.3 cm).
MICROWAVE INSTALLATION WITH BUILT-IN TRIM KIT
18” **
(45.7 cm)
24 3/8" (61.9 cm)
16 3/4"
(425 cm)
1” Min.*
(2.5 cm)
AMTK TRIM KIT DIMENSIONS
(USED WITH DISTINCTIVE AND
RENAISSANCE SERIES WALL OVENS)
1 1/4” (3.2 cm)
A
B
18 1/8”
(46.0 cm)
(USED WITH DISCOVERY SERIES WALL OVENS)
AOMTK TRIM KIT DIMENSIONS
NOTE:
1. Microwave is supplied with 42” (106.7 cm) power cord with a three prong grounding plug.
2. 3/4” (1.9 cm) platform (flush with cutout) required.
3. 20” (50.8 cm) minimum interior cabinet depth required for AMTK and AOMTK built-in trim kits.
4. See the Combination Installation (CI) section if installing with a wall oven or warming oven.
Specications subject to change without notice. Phone: (800) 793-0093www.Dacor.com
Trim Kit Model #
AMTK27 27” (68.6 cm)
AMTK30 30” (76.2 cm) 12 lbs.
AMTK36 36” (91.4 cm) 16 lbs.
AOMTK27 27” (68.6 cm) 17 lbs.
AOMTK30 30” (76.2 cm) 18 lbs.
(A) Overall
Width
(B) Opening
Width
24”
(61.0 cm)
Trim Kit
Overlays
Top: 5/8” (1.6 cm)
Bottom:
3/4”
(1.9 cm)
Approximate
Shipping Weight
12 lbs.
12.1
Loading...