Cycling VDO C1DS User Manual [nl]

CYCLECOMPUTING

BEDIENUNGSANLEITUNG

INSTRUCTION MANUAL

MANUEL D´INSTALLATION ET D´UTILISATION

MANUALE D´INSTALLAZIONE E FUNZIONAMENTO

INSTALACION Y OPERACIÓN MANUAL

HANDLEIDING

C1DS C2DS C3DS C4DS

P01

* *

*Watch out: old batteries require special disposal

P02

CLOSEOPEN

Battery

P03

1-6 mm

screw

P04

OPEN CLOSE

P05

P06

AC-button

WS in mm / inch

P07

P08

Tire size WS in mm KMH WS in inch MPH

47-305 16x1,75 1272 50,1 47-406 20x1,75 1590 62,6 34-540 24x1 3/8 1948 76,7 47-507 24x1,75 1907 75,1 23-571 26x1 1973 77,7 40-559 26x1,5 2026 79,8 44-559 26x1,6 2051 80,7 47-559 26x1,75 2070 81,5 50-559 26x1,9 2089 82,2 54-559 26x2,00 2114 83,2 57-559 26x2,125 2133 84,0 37-590 26x1 3/8 2105 82,9 20-571 26x3/4 1954 76,9

Tire size WS in mm KMH WS in inch MPH

32-630 27x1 1/4 2199 86,6 40-622 28x1,5 2224 87,6 47-622 28x1,75 2268 89,3 40-635 28x1 1/2 2265 89,2 37-622 28x1 3/8 2205 86,8 18-622 700x18C 2102 82,8 20-622 700x20C 2114 83,2 23-622 700x23C 2133 84,0 25-622 700x25C 2146 84,5 28-622 700x28C 2149 84,6 32-622 700x32C 2174 85,6 37-622 700x37C 2205 86,8 40-622 700x40C 2224 87,6

IMPORTANT!

This information will help you understand how the digital transmission of your VDO computer works. You really must follow the initial set-up steps in the order described below.

ATTENTION:

At a break during your ride the receiver will be switched off after 30 minutes (battery consumption). Before continuing your ride you need to switch on the receiver again = press M-button

IMPORTANT HINT for cell (mobile) phone brackets on the handlebar. The digital wireless transmission of you VDO DS computer is likely to be disturbed if you are operating a cell (mobile) phone too close to the computer. We highly recommend not mounting your phone on the handlebar.

IMPORTANT: General hint to read this manual: This manual is valid for all VDO Series-C models. Some functions and

features are not available with all models. The “ﬂag” icon on the beginning of a chapter indicates which model this chapter is relevant for.

C1DS C2DS C3DS C4DS

= valid for models C1DS,

C2DS, C3DS & C4DS

C3DS C4DS

= valid for models

C3DS & C4DS

Contents >>> P01

C1DS C2DS

Please check package contents for its completeness:

C3DS C4DS

1 VDO computer 1 VDO digital transmitter 2 Battery 3V CR2032 for the computer and transmitter 2 Battery door for the computer and transmitter 1 Handle bar mount 1 Fixing clamp 1 Spoke magnet 4 Cable ties to ﬁx transmitter

Preface

C1DS C2DS

Congratulations!

C3DS C4DS

With your choice of a VDO cycle computer, you have decided to own the most advanced technology available.

To enjoy the full potential of your computer and beneﬁt from all the technical features, we recommend you thoroughly study this manual. You will ﬁnd crucial hints for its operation as well as many more tips.

We wish you many enjoyable rides and trips on your bike with your VDO cycle computer.

CYCLE PARTS GMBH

Index part I

C1DS

1.0 VDO DIGITAL SYTEM

C2DS

1.1 Welcome to the club: your VDO-USER-CARD

C3DS

1.2 Functions

C4DS

1.3 Optional features

2. Installation

2.1 Battery installation (computer and transmitter)

2.2 Mounting sensor and magnet

2.3 Mounting cable and VDO any-size handlebar mount

2.4 TWIST-CLICK mounting of the computer

2.5 The 4-line VDO display

2.6 The VDO EMC-operating-system (Easy-Menu-Control)

2.7 Functions / menu structure Fundamental instructions to read this manual

3. Initial operation, AC-“auto-clear“

3.1 Manual Transmitter Search – DIGI CONNECT RESET

4 Basic settings

4.1 Language selection

4.2 Measuring and setting the wheel size(s)

4.3 Setting the clock

4.4 Setting the odometer

4.5 Changing wheel sizes from bike 1 to bike 2

4.6 Reset functions

5. Service-Interval-Indicator

6. Sleep-Mode

7. Cadence (optional)

Index part II

C2DS

8. Stopwatch

C3DS

Important hint:

„>>> P04“ links at the beginning of a chapter are related to the respective picture in the picture book!

Index part III

C3DS

9. NAVIGATOR functions

C4DS

Index part IV

C4DS

10. Timing functions

10.1 Selecting timing functions

10.2 Timer/countdown programming

10.3 Timer/countdown/stop watch start/stop/reset

10.4 Additional countdown functions

Index part V

C1DS

11. Troubleshooting

C2DS

12. Warranty disclaimer

C3DS

13. Technical speciﬁcations

C4DS

1.0 VDO DIGITAL SYTEM

C1DS

Your VDO cycle computer operates on digitally coded, wireless transmission. Different from

C2DS

analogue radio transmission, data is digitally transmitted (data packages step-by-step). With

C3DS

your actual speed varying, the reading will change stepwise. Individual coding of the signals

C4DS

ensures that only data coming from your transmitter is processed. No interference with signals coming from transmitters other than yours. Very rarely, even digital transmission may be interfered by high-voltage power lines, mobile phone poles, remote controls (car doors openers, garage door openers).

What happens when digital transmission is interfered with?

- speed display will read zero (0)

- trip distance stops counting

- ride timer stops counting

The digital VDO transmitter features an internal memory, that stores up to 45 sec of data at a speed of 20 KMH (12,5 MPH). At a rare interference, no data is lost! The related data pack-

+ 39 hidden pages