Page 1
NOTE: To avoid overflow when using the manual feature, the
grinder will automatically stop grinding when the maximum
capacity has been reached.
GRINDING SETTINGS
When selecting your grind setting remember that the higher the
number the coarser the grind. Use 1-6 for Espresso, 7-12 for
Auto Drip, and 13-18 for French Press.
CLEANING/MAINTENANCE
INSTRUCTIONS
1. Be sure plug has been removed from outlet.
2. Beans can be removed from the hopper by lifting off the lid
and pouring excess beans out. Hold down the Manual button
to cleanout any remaining beans.
3. The bean hopper, bean hopper lid, grind chamber, and grind
chamber lid can be washed by hand with hot, soapy water or
placed in the top shelf of a dishwasher. Dry thoroughly.
a. Remove the bean hopper by rotating counter-clockwise
bringing the selector past grind setting 18, align the
arrows and lift up. Make sure the hopper is empty.
b. Remove grind chamber by pulling toward you.
4. Remove the burr grinder, once the bean hopper has been
removed, by grasping the metal handle and lifting up. Use
the brush to remove grinds or wash by hand. Replace the
burr grinder onto the unit and rotate until the piece is fully
inserted. Push handle down and replace hopper.
NOTE: The hopper will not attach to the unit if the
grinder has not been fully inserted.
5. Wipe body of grinder with a damp cloth.
6. Any other servicing or maintenance should be performed by an
authorized service representative.
WARNING: NEVER IMMERSE UNIT IN WATER
WARRANTY
e Cuisinart® Programmable Conical Burr Mill carries a Limited
3-year Warranty. is warranty is available to consumers only.
You are a consumer if you are the owner of a Cuisinart® Programmable Conical
Burr Mill that was purchased at retail for personal, family, or household use.
Except as otherwise required by applicable state law, this warranty is not
available to retailers or other commercial purchasers or owners. We warrant
that should your Cuisinart® Programmable Conical Burr Mill prove to be
defective within the warranty period, we will repair it or replace it at our
option, without charge to you. To obtain warranty service, please register your
warranty online at www.cuisinart.com.au
Page 2
or
Call toll-free
1800 808 971 (AUST), 0800 435 000 (NZ),
or
Write to
Cuisinart Australia
24 Salisbury Road
Asquith NSW 2077
or
Cuisinart New Zealand
44 Apollo Drive Mairangi Bay
Auckland New Zealand
is warranty expressly excludes any defects or damages caused by accessories,
replacement parts, or repair service other than those that have been authorized
by Cuisinart.
is warranty does not cover any damage caused by accident, misuse, shipment
or other than ordinary household use.
BEFORE RETURNING YOUR CUISINART PRODUCT
Important: If the nonconforming product is to be serviced by someone other
than Cuisinart’s Authorized Service Centre, please remind the servicer to
call our Consumer Service Centre to ensure that the problem is properly
diagnosed, the product serviced with the correct parts, and to ensure that the
product is still under warranty.
© 2009 Cuisinart
Cuisinart® is a registered trademark of Cuisinart
150 Milford Road
East Windsor, NJ 08520
1-800-726-0190
Cuisinart Australia
24 Salisbury Road
Asquith, NSW 2077
Cuisinart New Zealand
44 Apollo Drive
Mairangi Bay, Auckland, New Zealand
Printed in China
IB-9/032
Page 3
CBM-18A
Programmable Conical Burr Mill
Page 4
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions
should always be followed, including the following:
1. Read all instructions.
2. To protect against risk of electrical shock, do not immerse
cord, plug or grinder in water or other liquid.
3. Close supervision is necessary when any appliance is used
by or near children.
4. UNPLUG FROM OUTLET WHEN NOT IN USE,
BEFORE PUTTING ON OR TAKING OFF PARTS,
BEFORE REMOVING COFFEE AND BEFORE
CLEANING.
5. Avoid contact with moving parts.
6. Do not operate any appliance with a damaged cord or plug,
or after the appliance malfunctions, or is dropped or damaged
in any manner. Return appliance to the nearest authorized
Cuisinart service facility for examination, repair, or mechanical
or electrical adjustment.
7. The use of attachments not recommended or sold by Cuisinart
may cause fire, electrical shock, or risk of injury.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter, or touch
hot surfaces.
10. Before using, check hopper for presence of foreign objects.
11. Use this appliance to grind roasted coffee beans only. Grinding
other substances, such as nuts, spices or unroasted beans, may
dull the blade and cause poor grinding or injury.
12. Do not use appliance for other than intended use.
13. Do not place this appliance on or near a hot gas or electric
burner, or in a heated oven.
14. This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
15. Children should be supervised to ensure that they do not play
with the appliance.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
INTRODUCTION
The next generation of coffee grinders has arrived to deliver the new
standard in home-ground coffee! The conical burrs grind the beans
with precise uniformity while maintaining the full flavour of the coffee bean. Whether you're using a French Press, Auto Drip or Espresso
Page 5
machine, you'll always start with the best, most precise ingredients.
This grinder is fully automated – just choose your grind setting and
number of cups, push Start, and the LCD with countdown timer
lets you know how soon you'll have your perfectly ground coffee!
OPERATING INSTRUCTIONS
1. Remove bean hopper lid.
2. Fill bean hopper, making sure that the lid closes securely.
Maximum capacity is 240g, be sure you have enough beans to
grind your desired amount of coffee.
3. Plug cord into outlet.
4. Select grind setting – turn the hopper to your desired grind
setting. The higher the number the coarser the grind. Use 1-6
for Espresso, 7-12 for Auto Drip, 13-18 for French Press. Your
current selection will be displayed on the LCD.
5. Select cup setting – press the # of Cups Button repeatedly until
your desired number of cups is displayed on the LCD, from 1
to 14 cups. Press and hold the button to scroll through the
numbers quickly.
6. Press the Start/Stop button to begin grinding.
A safety interlock system prevents the unit from operating unless
the hopper and grind chamber are properly in place.
Note: If the grind chamber is overfilled the chute can get clogged
and the unit will not work. The LCD will flash. To unclog, use
the scoop brush to clear out the chute of excess grounds.
Also note: If the grinder stops and displays HHH in the LCD
screen at any point, the motor has likely over-heated. Wait
approximately 2 minutes for your grinder to cool off; when the
HHH is no longer displayed, resume use.
7. Grinding will automatically stop upon completion.
Note: to pause or cancel operation during use, see below.
8. Pull the grind chamber toward you to remove from unit.
TO PAUSE OR CANCEL GRINDING
a. To pause the grinding, press the Start/Stop button. The
grinder will stop and the countdown timer will flash. Press the
Start/Stop button again to resume.
b. To cancel the grinding, press and hold the Start/Stop
button for 2-3 seconds.
NOTE: The unit will pause for up to 5 minutes before cancelling
the grind.
MANUAL GRIND
If you prefer, after selecting your grind setting, you have the
option of manually controlling how much coffee the unit will
grind. To do so, follow steps 1-4 on previous page. en press
and hold the manual button until the desired amount of coffee
has been ground. e LCD will display M.
Page 6
5.
1.
9.
1. Hopper Lid
2. Bean Hopper
3. Conical Burr
Grinder (not shown)
4. Grind Selector
5. Cup Selector
6. Start/Stop Button
7. LCD Display
8. Manual Button
9. Grind Chamber
with Lid
10. Cord Storage
2.
4.
8.
6.
7.
Loading...