Cuisinart Cbm-18 Owner's Manual

MANUAL GRIND

If you prefer, after selecting your grind setting, you have the
option of manually controlling how much coffee the unit will
grind. To do so, follow steps 1-4 on previous page. en press
and hold the manual button until the desired amount of coffee
has been ground. e LCD will display M.

NOTE: To avoid overflow when using the manual feature, the
grinder will automatically stop grinding when the maximum

capacity has been reached.

GRINDING SETTINGS

When selecting your grind setting remember that the higher the
number the coarser the grind. Use 1-6 for Espresso, 7-12 for
Auto Drip, and 13-18 for French Press.

CLEANING/MAINTENANCE
INSTRUCTIONS

1. Be sure plug has been removed from outlet.

2. Beans can be removed from the hopper by lifting off the lid
and pouring excess beans out. Hold down the Manual button
to cleanout any remaining beans.

3. The bean hopper, bean hopper lid, grind chamber, and grind
chamber lid can be washed by hand with hot, soapy water or
placed in the top shelf of a dishwasher. Dry thoroughly.

a. Remove the bean hopper by rotating counter-clockwise

bringing the selector past grind setting 18, align the
arrows and lift up. Make sure the hopper is empty.

b. Remove grind chamber by pulling toward you.

4. Remove the burr grinder, once the bean hopper has been

removed, by grasping the metal handle and lifting up. Use
the brush to remove grinds or wash by hand. Replace the
burr grinder onto the unit and rotate until the piece is fully
inserted. Push handle down and replace hopper.

NOTE: The hopper will not attach to the unit if the

grinder has not been fully inserted.

5. Wipe body of grinder with a damp cloth.

6. Any other servicing or maintenance should be performed by an
authorized service representative.

WARNING: NEVER IMMERSE UNIT IN WATER

WARRANTY

e Cuisinart® Programmable Conical Burr Mill carries a Limited
18-Month Warranty. is warranty is available to consumers only.
You are a consumer if you are the owner of a Cuisinart® Programmable Conical
Burr Mill that was purchased at retail for personal, family, or household use.
Except as otherwise required by applicable state law, this warranty is not
available to retailers or other commercial purchasers or owners. We warrant
that should your Cuisinart® Programmable Conical Burr Mill prove to be

defective within the warranty period, we will repair it or replace it at our
option, without charge to you. To obtain warranty service, simply call our toll­free number: 800-726-0190, for additional information from our Consumer
Service Representatives, or send the product to Consumer Service at Cuisinart,
150 Milford Road, East Windsor, New Jersey 08520. To facilitate the speed
and accuracy of your return, please enclose a check or money order for $4.00 for
shipping and handling.

(California residents need only supply proof of purchase and should call
1-800-726-0190 for shipping instructions.) NOTE: For added protection
and secure handling of any Cuisinart® product that is being returned, we
recommend you use a traceable, insured delivery service. Cuisinart cannot be
held responsible for in-transit damage or for packages that are not delivered
to us. Lost and/or damaged products are not covered under warranty. Your
Cuisinart® Programmable Conical Burr Mill has been manufactured to strict
specifications and has been designed for use with the Cuisinart® Programmable
Conical Burr Mill authorized accessories and replacement parts for your
model. ese warranties expressly exclude any defects or damages caused by
accessories, replacement parts or repair service other than those that have
been authorized by Cuisinart. ese warranties exclude all incidental or
consequential damages. Some states do not allow the exclusion of or limitation
of incidental or consequential damages, so the foregoing limitation or exclusion
may not apply to you.

CALIFORNIA RESIDENTS ONLY

California law provides that for In-Warranty Service, California residents have
the option of returning a nonconforming product (A) to the store where it
was purchased or (B) to another retail store which sells Cuisinart products
of the same type. e retail store shall then, according to its preference, either
repair the product, refer the consumer to an independent repair facility,
replace the product, or refund the purchase price less the amount directly
attributable to the consumer’s prior usage of the product. If the above two
options do not result in the appropriate relief to the consumer, the consumer
may then take the product to an independent repair facility if service or repair
can be economically accomplished. Cuisinart and not the consumer will be
responsible for the reasonable cost of such service, repair, replacement, or
refund for nonconforming products under warranty. California residents may
also, according to their preference, return nonconforming products directly
to Cuisinart for repair or, if necessary, replacement by calling our Consumer
Service Center toll-free at 800-726-0190. Cuisinart will be responsible
for the cost of the repair, replacement, and shipping and handling for such
nonconforming products under warranty.

BEFORE RETURNING YOUR CUISINART PRODUCT

Important: If the nonconforming product is to be serviced by someone other

than Cuisinart’s Authorized Service Center, please remind the servicer to
call our Consumer Service Center to ensure that the problem is properly
diagnosed, the product serviced with the correct parts, and to ensure that the
product is still under warranty.

©2008 Cuisinart

Cuisinart® is a registered trademark of Cuisinart

150 Milford Road, East Windsor, NJ 08520

Printed in China

08CU341

IB-8304