Cuisinart BW-10 Quick Reference
QUICK REFERENCE GUIDE
Baby Bottle Warmer
BOTTLE WARMING
NOTE: These instructions are to be used as a guide only. Please note that there are many
variables, such as size of the bottle and starting temperature of the food, that can affect the
speed at which this unit warms the bottle or jar as well as the nal temperature. Adjustments
to the instructions below may be necessary. Always test the temperature of food before
feeding baby.
Remove the measuring cup from the
front of the housing and ll it with
1.
water to the appropriate ll line,
according to the chart.
Bottle Warming Guide
Bottle Capacity 5˚C/40˚F 20˚C/70˚F
4 oz. plastic 10ml 8ml
8.9 oz. plastic 10ml 8ml
4 oz. glass 14ml 8ml
8.9 oz. glass 14ml 8ml
Baby food 4 oz. 12ml 8ml
Baby food 6 oz. 12ml 8ml
Pour the pre-measured
2. 3.
amount of water from the
measuring cup directly into
the warming chamber.
FOR PLASTIC BOTTLES
Put the bottle basket in the
bottle-warming chamber. Line
up the bottle basket arms with the insets on the bottle warmer housing. In
this position the basket will be even/
ush with the housing.
long a period and reach too high a
temperature.
Note: Always make sure there is no
water in chamber from previous use.
To empty the unit of leftover water,
tilt the unit onto its side over the
sink. Any extra water will come out.
5.4.
turn the bottle basket to a 45-degree
angle (basket will slide into place). In
this position the bottle basket will sit
about 1 inch above the housing.
Do not overll. If too much
water is used, the bottle or
jar may be heated for too
FOR GLASS BOTTLES
Put the bottle basket in the
bottle warming chamber and
BOTTLE WARMING CONTINUED
Turn the dial to ON posi-
6. 7.
off automatically once bottle warming
is complete. Turn the dial to the OFF
position.
Let the bottle sit for 15 to 30 seconds.
Remove extremely carefully. Shake the
bottle to distribute the heated contents
before checking the temperature.
tion. Blue LED indicator will
turn on. The unit will shut
adapter ring over the bottle* sitting in
the bottle warming chamber and turn
the dial to the ON position. Blue LED
indicator will turn on. The unit will shut
off automatically
once bottle warming
is complete. Turn
the dial to the OFF
position.
When warming a narrow bottle,
we suggest that you use the
adapter ring. Position the
*NOTE: IF THE ADAPTER RING DOES NOT FIT LOOSELY
AROUND THE BOTTLE, DO NOT USE THE RING.
FOOD WARMING
Remove the lid of the food
1. 2.
the handle to lower it into the bottle
warming chamber. Turn the dial to
the ON position. Blue LED indicator
light will turn on. The unit will shut
off automatically
once food warming
is complete. Turn
the dial to the OFF
position.
jar and then put the jar in the
food warming basket. Use
warming basket to lift the jar out of the
warming chamber. When you remove
the jar from the unit, the contents of
the jar will not be evenly heated. Stir
the food to distribute
the heated contents
before checking the
temperature.
Let the jar sit for 15 to 30
seconds before removing.
Use the handle of the food-
1.
NIGHTLIGHT
To turn the nightlight on, press the gray
button with the word LIGHT above it
located on the top of the unit.
Light will illuminate from the measuring
cup area and from around the dial. The
nightlight will stay on until the button is
pressed again.
IMPORTANT
Do not throw away. Read before operating your new Bottle Warmer.
Keep for future reference.
These helpful hints are intended to be a supplement
to the Instruction Booklet. In order to ensure safe operation and
optimum performance, please read the entire Instruction Booklet.
For more helpful hints see Instruction Booklet
PG-30191
Loading...