How it Works
Cub Cadet
Loading...
HB59L
User Manual
12 pgs2.35 Mb0

Cub Cadet HB59L User Manual

• IMPORTANT SAFETY INSTRUCTIONS •
769-06485 P01 01/11
Operator’s Manual
20 Volt Lithium-Ion
Battery-Powered Blower
HB59L
TABLE OF CONTENTS
Know Your Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
DO NOT RETURN THIS UNIT TO THE RETAILER. PROOF OF PURCHASE WILL BE REQUIRED FOR WARRANTY SERVICE.
For assistance regarding the assembly, controls, operation or maintenance of the unit, please call the Customer Support Department. Additional information about the unit can be found on our website.
Please call the Customer Support Department for replacement parts. When servicing, use only identical replacement parts.
DO NOT RETURN THIS
PRODUCT
Please call the Customer Support Department
or visit our website for assistance:
or
SAFETY INFORMATION
SAVE THESE INSTRUCTIONS
All information, illustrations and specifications in this manual are based on the latest product information available at the time of printing. We reserve the right to make changes at any time without notice.
Copyright© 2011 MTD SOUTHWEST INC, All Rights Reserved.
Use 20V Lithium-Ion Battery A59 LBTY (sold separately) Use 20V Lithium-Ion Battery Charger A59LCHGR (sold separately)
U.S.
1-877-282-8684
www.cubcadet.com
Canada
1-800-668-1238
www.cubcadet.ca
SERVICE INFORMATION
PRELIMINARY SAFETY PRECAUTIONS
• DO NOT
rely exclusively upon the safety devices built into the unit.
• Keep bystanders, especially children and pets, at least 50 feet (15 m) away. If anyone enters the work area, stop the unit!
• Keep the work area clean. Cluttered areas invite injuries. Do not start the operation until the work area is clear and free from obstructions and there is secure footing.
• Always wear appropriate eye and ear protection when operating this unit. Wear safety goggles, or safety glasses with side shields, that are marked as meeting ANSI Z87.1-1989 standards. Failure to do so could result in serious eye injury caused by thrown objects. If the operation is dusty, wear a facemask or dust mask.
• Dress appropriately. Wear non-slip protective gloves and boots. Do not wear loose clothing, jewelry, short pants, sandals or go barefoot. Secure hair above shoulder level to prevent entanglement in moving parts.
• Only use the unit in daylight or good artificial light.
• Only use the unit for the purpose intended.
BLOWER SPECIFIC SAFETY PRECAUTIONS
• DO NOT insert anything into the air openings, blower tube or nozzle.
• DO NOT operate the unit if any of the air openings, blower tube or nozzle are blocked.
• DO NOT use the unit for spreading chemicals, fertilizer or any other substance that may contain toxic materials.
• DO NOT use the unit to spray liquids, especially flammable liquids.
• During operation, never point the unit in the direction of people, pets or windows. Always direct blowing debris away from people, pets and windows.
• Keep the air openings free from dust, lint, hair and anything else that may reduce airflow.
• Inspect the work area before using the unit. Remove any hard and/or sharp objects, such as glass, wire, etc. If blown, such objects could cause property damage or injury to the operator or bystanders.
• Use extra caution when blowing debris near solid objects, such trees, automobiles, walls, fences, etc. When possible, blow away from such objects, not toward them.
• Take care when working near valuable plants. The force of the blown air could damage tender plants.
OTHER SAFETY PRECAUTIONS
• DO NOT handle the unit with wet hands.
• DO NOT over reach.
• DO NOT
operate the unit on unstable surfaces, such as trees, ladders, slopes or rooftops. Be very
careful when using the unit on stairs.
• DO NOT expose the unit to rain. Do not use the unit in damp or wet locations or conditions.
• DO NOT
operate the unit on wet surfaces.
• DO NOT use the unit in the presence of flammable liquids or gases.
• DO NOT operate a unit that is damaged, improperly adjusted or not completely and securely assembled. Be sure that the unit stops when the switch is set to OFF. Do not use the unit if the switch does not turn the unit on and off properly.
• DO NOT attempt operations beyond the operator’s capacity or experience.
• Grip the unit firmly when the motor is running. Use a firm grip with thumb and fingers encircling the handle.
• Keep hair, loose clothing, fingers and all other body parts away from openings and moving parts.
• Keep proper footing and balance at all times.
• To reduce the risk of electric shock, avoid body contact with grounded conductors, such as metal pipes or wire fences.
• Always stop the motor when operation is delayed, before setting down the unit or when walking from one location to another. Make sure the unit comes to a complete stop.
•
To avoid accidental starting, never carry the unit with fingers on the switch.
•
Always make sure the switch is in the OFF position before installing or removing the battery.
•
Always carry the unit by the handle with the battery removed and finger off the switch.
•
This unit is intended for infrequent use by homeowners. It is not intended for prolonged use.
READ ALL INSTRUCTIONS BEFORE OPERATING
SAFETY BASICS
• Carefully read and understand the operator's manual of the battery that powers this unit.
• Be thoroughly familiar with the controls and the proper use of the unit. Know how to stop the unit and disengage the controls quickly.
• Stay alert! Do not operate the unit when tired, ill or under the influence of alcohol, drugs or medication.
• Never allow children to operate the unit. Never allow adults to operate the unit without proper instruction.
• Do not allow the unit to be used as a toy.
• Keep these instructions. Refer to them often and use them to instruct other users. If loaning someone this unit, also loan them these instructions.
WARNING:
Please read the entire operator’s manual carefully before attempting to assemble, operate or maintain the unit. Follow all safety instructions. Failure to do so can result in property damage or serious injury to yourself and/or others.
CALIFORNIA PROPOSITION 65
WARNING:Battery posts, terminals and certain finished components contain
lead, lead compounds and chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
DANGER:
Signals an EXTREME hazard.
Failure to obey a safety DANGER signal WILL result in serious injury or death to yourself or to others.
WARNING:Signals a SERIOUS hazard.
Failure to obey a safety WARNING signal CAN result in serious injury to yourself or to others.
CAUTION:
Signals a MODERATE hazard.
Failure to obey a safety CAUTION signal MAY result in property damage or injury to yourself or to others.
IMPORTANT! Signals special mechanical information. NOTE: Signals additional important general information.
SYMBOL MEANING
• SAFETY ALERT SYMBOLS •
Safety alert symbols are used to draw your attention to possible dangers. These symbols, and their
explanations, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for
proper accident prevention measures. These safety instructions are not meant to cover every
possible condition that may occur. If questions arise, please call the Customer Support
Department at 1-877-282-8684 (U.S.) or 1-800-668-1238 (Canada).
SAFETY INFORMATION
2
• SAFETY AND INTERNATIONAL SYMBOLS •
This operator's manual describes safety and international symbols and pictographs that may appear on this product. Read the operator's manual for complete safety, assembly, operating, maintenance and repair information.
• SAFETY ALERT SYMBOL
Indicates danger, warning or caution. May be used in conjunction with other symbols or pictographs.
• READ OPERATOR'S MANUAL
WARNING:R
ead the operator’s manual(s) and follow all warnings and safety instructions. Failure to do so can result in serious injury to the operator and/or bystanders.
• WEAR EYE AND HEARING PROTECTION
WARNING:Thrown objects and loud noise can cause severe eye
injury and hearing loss. Wear eye protection meeting ANSI Z87.1-1989 standards and ear protection when operating this unit. Use a full face shield when needed.
• KEEP BYSTANDERS AWAY
WARNING:Keep all bystanders, especially children and pets, at
least 50 feet (15 m) from the operating area. If anyone enters the work area, stop the unit!
SYMBOL MEANING
• DO NOT USE IN THE RAIN
WARNING:Avoid dangerous environments. Never operate your
unit in the rain, or in damp or wet conditions. Moisture is a shock hazard.
MAINTENANCE AND STORAGE SAFETY
• DO NOT perform
maintenance
procedures other than those described in this manual. Do not
attempt to repair; there are no user serviceable parts inside.
• Follow all maintenance instructions in this manual.
• Before inspecting, servicing, cleaning, storing, transporting or replacing any parts on the unit:
1.
Make sure all moving parts have stopped.
2. Allow the unit to cool.
3. Make sure the switch is in the OFF position.
4. Remove the battery.
• Never remove, modify or make inoperative any safety device furnished with the unit.
• Frequently inspect the unit for damage.
Before further use, any damaged part should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts and any other conditions that may affect its operation. Damaged parts should be properly repaired or replaced.
• Use only original manufacturer replacement parts and accessories, which are designed specifically to enhance the performance and maximize the safe operation of the product. Failure to do so may cause poor performance and possible injury.
• Remove the battery from the unit when not in use.
• Be sure to secure the unit while transporting.
• When not in use, store the unit in a locked-up and dry, or high and dry, place to prevent unauthorized use or damage. Keep out of the reach of children.
•
Keep the handle dry, clean and free from debris, oil and grease. Clean the unit after each use. Never douse or squirt the unit with water or any other liquid.
Do not use solvents or strong detergents.
• If dropped in water, do not use the unit.
This unit requires assembly.
UNPACKING
• Carefully remove the product and any accessories from the box.
• Inspect the product carefully to make sure no breakage or damage occurred during shipping.
• Do not discard the packing material until you have carefully inspected and satisfactorily operated the product.
• If any parts are damaged or missing, please call 1-877-282-8684 (U.S.) or 1-800-668-1238 (Canada) for assistance.
INSTALLING THE BLOWER TUBE AND NOZZLE
This blower can be operated with or without the blower tube and nozzle. The blower tube and nozzle extend the reach of the blower and concentrate the flow of air it delivers.
1. Align the widest end of the blower tube with the front opening on the blower (Fig. 1).
2. Slide the blower tube over the front opening on the blower until the latch is inserted into the opening on the blower tube and locks into place.
3. Slide the nozzle over the blower tube until the latch on the blower tube is inserted into the end of the opening on the nozzle and locks into place.
INSTALLING AND REMOVING THE BATTERY
Follow these instructions in order to avoid injury and to reduce the risk of electric shock or fire:
• Verify that the switch is in the OFF position before installing or removing the
battery. Refer to Starting and Stopping Instructions.
• Verify that the battery is removed and the switch is in the OFF position before
inspecting, adjusting or performing maintenance on any part of the unit.
Installing the Battery
1. Align the tongue of the battery with the handle cavity (Fig. 2).
2. Grasp the handle firmly.
3. Push the battery into the handle cavity until the latch locks into place.
4.
Do not use force when inserting the battery. It should slide into position and “click.”
Removing the Battery
1. Press the latch button on the battery down and hold (Fig. 2).
2. Grasp the handle firmly and pull the battery out of the handle cavity.
NOTE: The battery fits into the handle cavity snugly in order to prevent accidental dislodging. It may require a strong pull to remove it.
IMPORTANT! The battery is equipped with an internal circuit breaker that will automatically shut off power to the unit if the battery is
overloaded during heavy use. Once cooled, the battery will reset itself. Follow these steps if an overload occurs:
1. Set the switch to the OFF position and then restart the unit. Refer to Starting and Stopping Instructions.
2. The battery may need to be removed for approximately 1 minute, allowed to cool and then reinstalled.
KNOW YOUR UNIT
ASSEMBLY INSTRUCTIONS
Battery
(Sold Separately)
Two-speed
Switch
APPLICATIONS
This unit may be used for the purposes listed below:
• Cleaning yards, garages, driveways, porches, patios, sidewalks,
around walls, fences, etc.
Blower
SAVE THESE INSTRUCTIONS
Nozzle
Blower Tube
Fig. 1
Fig. 2
Tongue
Latch
Button
Handle Cavity
STARTING AND STOPPING INSTRUCTIONS
STARTING THE MOTOR
The blower is equipped with a two-speed switch.
1. Fit the battery into the handle cavity (Fig. 2). Refer to Installing the Battery.
2. Press the switch to either the HIGH or LOW position (Fig. 3).
STOPPING THE MOTOR
1. Press the switch to the OFF position (Fig. 3).
LOW
Fig. 3
OFF
• THROWN OBJECTS CAN CAUSE SEVERE INJURY
WARNING:Keep clear of the blower outlet. Objects can be
thrown by the blower. Never point the blower at anyone.
Nozzle
Blower Tube
Blower
HIGH
Two-speed
Switch
CAUTION:
When the battery is not installed in the unit, keep it away from paper clips, coins, keys, nails, screws or other metal objects that could make a connection from one terminal to another. Shorting the battery terminals together may cause sparks, burns or a fire.
• WEAR SAFETY FOOTWEAR
Wear non-slip safety footwear when using this equipment.
•
WEAR SAFETY GLOVES
Wear non-slip, heavy-duty protective gloves when handling the unit.
WARNING:
Make sure the battery is removed from the unit and the two-speed switch is in the OFF position before installing the blower tube and nozzle.
NO TOOLS REQUIRED!
CAUSE SOLUTION
The battery lacks sufficient charge Charge the battery
3
PROPER GRIP ON HANDLE
• Always maintain a proper grip on the handle whenever the motor is running. The fingers should encircle the handle and the thumb should wrap under the handle.
PROPER STANCE
• Balance body weight securely, with both feet on solid ground.
WORK AREA PRECAUTIONS
• Keep everyone – helpers, bystanders, children and animals – at least 50 feet (15 m) away from the work area. If anyone enters the work area, stop the unit!
• Only operate the unit when visibility and light are adequate to see clearly.
• Use rakes and brooms to loosen debris before operating the unit.
• Remove stones, nails, glass and wire from the area before operating the unit.
• Take care when operating the unit near windows and vehicles.
• To reduce noise levels, operate the unit at the lowest speed needed to do the job.
• Only operate the unit during reasonable hours. Comply with times listed in local ordinances.
BASIC OPERATING PROCEDURES
1. Start the motor. Refer to Starting and Stopping Instructions.
2. Hold the blower with the nozzle several inches above the floor or ground (Fig. 4).
3. Sweep the nozzle from side to side while slowly advancing, directing the
accumulated pile of debris ahead of the operator.
4. Dispose of debris appropriately.
Fig. 4
OPERATING INSTRUCTIONS
MAINTENANCE AND REPAIR INSTRUCTIONS
CLEARING A BLOCKED BLOWER TUBE OR NOZZLE
1. Stop the motor and remove the battery from the unit. Refer to Removing the Battery in the Assembly Instructions section.
2. Disconnect the blower tube from the blower and the nozzle from the blower tube.
3. Use a firm-bristled, non-wire, brush to clear the blower tube, nozzle and blower opening of all debris.
4. Once clear of obstructions, re-assemble the unit. Refer to Assembly Instructions.
NOTE: If it is necessary to replace damaged or missing parts, use only manufacturer suggested replacement parts. The use of any
other parts may create a hazard or cause product damage and will VOID the warranty.
Cleaning Instructions
• Remove the battery from the unit.
• Use a firm-bristled, non-wire, brush to remove debris from the air openings, blower tube and nozzle.
• Wipe the unit down with a damp cloth. Do not douse the unit with water. Do not use solvents or strong detergents.
Storage Instructions
• Follow the Cleaning Instructions listed above.
• Store the unit in a dry, high and/or locked location, out of the reach of children and other unauthorized persons.
WARNING:
Do not let brake fluids, gasoline, petroleum-based products, penetrating oils, etc., come in contact with plastic
parts. These chemicals may damage, weaken and destroy plastic, which may result in serious personal injury.
SPECIFICATIONS
MOTOR*
* All specifications are based on the latest product information available at the time of printing. We reserve the right to make changes at
any time without notice.
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cordless, Battery-powered
Motor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 V
Motor Speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13000 rpm
Air Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 CFM & 110 CFM
Air Speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 & 125 mph (135 & 200 km/h)
Weight (with Battery) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 lb 4 oz (2.9 kg)
CLEANING AND STORAGE
TROUBLESHOOTING
NOTE: For maintenance beyond the minor adjustments listed above, or for replacement parts, please call the Customer Support
Department at 1-877-282-8684 (U.S.) or 1-800-668-1238 (Canada).
THE UNIT WILL NOT BLOW
CAUSE SOLUTION
The impeller (fan) is damaged Refer to Service Information
The nozzle, blower tube or blower opening is blocked Clear the blockage. Refer to Clearing a Blocked Blower Tube or
Nozzle in the Maintenance and Repair Instructions section.
WARNING:
Do not expose the unit to rain. Do not use the unit in damp or wet locations or conditions.
WARNING:
Do not allow familiarity with this unit to promote carelessness. Remember that a careless fraction of a
second is enough to inflict serious injury.
WARNING:
Always wear appropriate eye and ear protection when operating this unit. Wear safety goggles, or safety glasses with side shields, that are marked as meeting ANSI Z87.1-1989 standards. Failure to do so could result in serious eye injury caused by thrown objects. If the operation is dusty, wear a facemask or dust mask.
WARNING:
If any parts are damaged or missing, do not operate the unit until the parts are replaced. Failure to heed this warning could result in serious personal injury.
WARNING:
Wear non-slip gloves for maximum grip and protection. Refer to the Safety Information section for
appropriate safety equipment.
WARNING:
Before inspecting, cleaning or servicing the unit, stop the motor, wait for all moving parts to stop and remove the battery. Failure to follow these instructions can result in serious personal injury or property damage.
ACCESSORIES (SOLD SEPARATELY)
Model #
A59 LBTY . . . . . . . . . . . . .
A59LCHGR . . . . . . . . . . . .
Description
20V Lithium-ion Battery 20V Lithium-ion Battery Charger
Part #
753-06579 . . . . . . .
753-06580 . . . . . . .
THE MOTOR OPERATES SLOWLY OR WILL NOT OPERATE
NOTES
4
NOTES
Loading...
+ 8 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use