CTEK CT5 Time To Go User Manual
CT5
CT5 TIME TO GO
TIME TO GO
BATTERY CHARGER & MAINTAINER
TAKE CONTROL OF YOUR TIME
Isn’t it great when you have control over your own time?
Finding time for car maintenance can prove difficult,
especially when you don’t know how long a task is
going to take. Up until now, this has been the case for
battery charging, a vital activity that can prevent vehicle
breakdowns and extend battery life. The CT5 TIME TO GO
charger from CTEK allows you to stay in control and plan
your day, by accurately predicting remaining charging
time.
GET THE FULL PICTURE
The CTEK TIME TO GO charger takes a different approach
to battery charging – it tells you when your battery will
be ready for use. A series of LED lights indicate the
different charging stages and how long it will take before
the battery is charged and ready to go. There are also
indicators that tell you when you can safely TRY to start
your vehicle and when the battery is ready to GO.
MAXIMIZE BATTERY PERFORMANCE
The CT5 TIME TO GO charger has three key charging and
maintenance stages to maximise the power and lifetime
of the battery - it can even revive a discharged battery
that has become flat. Easy to use and fully automatic, the
CT5 TIME TO GO charger uses advanced technology to
constantly monitor the battery’s power and health and
take action when required. It can be attached to the
battery indefinitely if required without risk of over or
under charging.
TIME TO GO
The CT5 TIME TO GO charger is the first
charger in the world to tell you exactly when
your battery will be charged and ready to go.
A series of LED lights indicate the dierent
charging stages, and how long (in hours)
your battery has to go before it’s charged.
Countdown to ready-charged, in hours.
Valid for all 12V lead-acid
batteries.
More than 8 hours
8h
until ready-charged.
Approximate 4 hours
4h
until ready-charged.
Approximate 2 hours
2h
until ready-charged.
Approximate 1 hour
1h
until ready-charged.
New CTEK feature
CT5 TIME TO GO
TIME TO GO
ACCESSORIES INCLUDED 3 SELECTABLE CHARGE PROGRAMS
CONNECT–Clamp
CONNECT–Eyelet M6
CHARGING STEPS
GO CARETRY
HOURS124>8
TRY
A lit TRY indicator means it is possible to make ONE start
attempt.
GO
8hrs | 4hrs | 2hrs | 1hr > GO.
One single lit LED tells you exactly how long the battery has
to go before it is ready-charged. When the GO LED is lit, the
battery is 80% charged and ready for full use.
CARE
Leave your battery connected for safe, long-term storage
and your vehicle will have a fully charged battery whenever
you want to use it.
NORMAL
Charge program for medium sized lead-acid batteries.
AGM
Charge program for medium sized AGM batteries, used in
start-stop vehicles.
RECOND
Charge program for reconditioning of deeply discharged
batteries.
TECHNICAL DATA
INPUT 220–240VAC, 50–60Hz, 0.6A
OUTPUT
AMBIENT
TEMPERATURE
TYPE OF BATTERY
BATTERY CAPACITY 20–160Ah
WARRANTY 5 years
TEMPERATURE
COMPENSATION
5A max, NORMAL 14.4V, AGM 14.7V,
RECOND 15.8V
-20°C to +50°C
All types of 12V lead-acid batteries
(WET, MF, Ca,/Ca, AGM and GEL)
Built in charge voltage compensation
according to ambient temperature.
GUARANTEED QUALITY WITH CTEK
Safety, simplicity and flexibility characterizes all products and
solutions developed and sold by CTEK.
CTEK supply chargers to more than 70 countries throughout
the world. CTEK is also a reliable OEM supplier to many of the
world’s most prestigious car and motorcycle manufacturers.
CTEK customer support is available to answer any questions
related to charging and CTEK chargers. For more information
please visit WWW.CTEK.COM
20022663B 57-053 EN
Loading...