Letting in air ......................................................................................................................................... Page 7
Usage a lounger / chair ...................................................................................................................... Page 8
Letting air out ....................................................................................................................................... Page 8
This product is intended for use as a chair, unfolded
as lounger or air mattress. This product is not suitable
for children under 13 years of age. The product is
not intended for commercial use.
DEFIANCE AND VIOLATION OF THIS MANUAL
CAN RESULT IN HAZARDS, SUCH AS PERSONAL
INJURY AND DEATH, E.G. FROM DROWNING!
Description of parts
1
Air valve
2
Repareren
3
Inflatable beach chair
Technical data
Dimensions (inflated): Approx. 168 x 78 x 53 cm
(L x W x H)
Dimensions (deflated): Approx. 181 x 83 cm
(L x W)
Weight: Approx. 1440 g
Max. load: 80 kg
Material: PVC
Rated pressure: Body: 0.45 psi (0.031 bar)
Pillow: 0.30 psi (0.021 bar)
Safety advice
KEEP ALL THE SAFETY ADVICE AND
INSTRUCTIONS IN A SAFE PLACE FOR
FUTURE REFERENCE!
INJURY AND RISK OF ACCIDENTS FOR INFANTS AND
CHILDREN! Never leave children unattended
with the packaging material or the product.
There is a risk of suffocation from the packaging
materials and a risk of fatal injury by strangulation.
RISK OF FATAL
Children often underestimate dangers.
DANGER TO
LIFE! Never let children unsupervised
with the product. The product may
not be used by children under the age of 13.
DANGER TO LIFE THROUGH
DROWNING! Never leave children and the
product alone and unsupervised in the water.
There is a danger of drowning. Use swimming
aids if necessary. Never stay in the water
alone. Make sure that at least one competent
person is present.
DANGER TO LIFE! Never use
the product in open water. Danger of being
carried away from the bank or shore. Always
use the product in enclosed areas of water that
are small enough to be monitored or supervised,
such as swimming pools.
DANGER TO LIFE! The product
is not suitable for use as a floatation aid! A child
who slips off the product could drown in a very
short time, even though the water may be shallow
enough to stand up in. Children who cannot yet
swim must therefore never be left to play unsupervised in water.
DANGER TO LIFE! Never use
this product in deep areas of water. Use it ex-
clusively in shallow areas of water. An area of
water can be considered as shallow if the user
of the product is able to sit on the bottom of
the area of water and hold his or her head
clearly above the water’s surface.
CAUTION! RISK OF INJURY! Make sure
that all parts are undamaged. Damaged parts
could adversely affect safety and function.
CAUTION! RISK OF INJURY! Make sure
that you do not pump too much air into the
product. Otherwise the product may burst.
CAUTION! RISK OF POISONING AND
RISK OF DAMAGE TO PROPERTY! Do
not light any fires near the product and keep it
away from sources of heat.
Do not use the product on hard or stony ground.
Otherwise this may result in damage to the
product.
under the water surface when getting onto it.
This - as well as uneven loading of the product could cause it to tip over.
Pictograms
Take note of the information
contained in the pictograms applied to the product
before you use it. Failure to observe this advice
could result in injury and / or damage.
Mandatory
action sign
Read instructions
first.
Always supervise
children in water.
100%
Swimmers only!
Fully inflate all
air chambers as
indicated order
of inflation.
Note: Before using the product for the first time,
check it carefully for holes, porous places and or
seams that are not airtight.
Recommendation: Blow up the product and
leave it alone for one day. Air new products in the
open air for a few days.
Letting in air
Do not use in
offshore wind.
CAUTION! Inflatable plastic products are sensitive
to the cold. That is why you should never use the
product when the ambient temperature falls below
15 °C and rises above 45 °C. Otherwise damage
to the product may result.
Note: Inflating the product should be done by
adults only. Make sure that you do not blow / pump
too much air into the product. Stop the process when
resistance increases during pumping and the seams
start to stretch. Otherwise the material may tear.
Only use manual pumps and / or pumps specifically
designed for use with inflatable plastic products.
Press the sides of the air valve 1 together using
your thumb and index finger.
Slowly roll the product up.
Note: Make sure that the product is completely
dry before you roll it up.
Roll the product out first and then check for
holes, tears and other damage.
Open the air valve 1 (see Fig. A I).
Press the air valve 1 together and blow or
pump the product up until it is tautly stretched.
Note: Inflate the air chambers in the following
sequence:
1. Headrest
2. Headpiece
3. Mid air chamber
4. Foot piece
CAUTION! On no account should you use
compressed air. Otherwise the product could
burst or the seams could tear.
IMPORTANT! Keep in mind that air tempera-
ture and weather conditions can affect the air
pressure inside inflatable products. In cold
weather the product behaves as if it has less
air pressure in it because the air inside contracts.
Under these conditions you may have to add
air. In hot weather the air inside expands. Under
these conditions you may have to remove air in
order to avoid overfilling.
Close the air valve 1 (see Fig. A II).
Push the air valve 1 in (see Fig. A III).
Usage a lounger / chair
Lounger:
Inflate all 4 air chambers to use this product
as lounger (see Fig. C I).
Chair:
Inflate all air chambers except the middle
air chamber and fold as shown on fig. C II.
Letting air out
Pull the air valve 1 out and open it
(see Fig. A II + I).
Cleaning and care
Use a slightly damp, lint-free cloth to clean the
product.
On no account should you use corrosive or
scouring detergents.
Storage instruction
Make sure that the product is completely dry
both inside and out when wishing to store it for
any length of time. Otherwise mildew and
mould may form.
Store the product in dark, dry place – out of
reach of children.
The ideal storage temperature is 10 - 20 °C. Ensure that the product does not come into
contact with sharp objects during storage.
Repairing the product
Note: Minor damage can be repaired by the
owner using the supplied repair kit. Have any major
damage carried out at a specialist repair shop.
First let all the air escape from of the product
(see “Letting air out”).
Cut the patch 2 to suit the size of the hole.
Note: Ensure that the patch
2
is larger than
the hole and overlaps the edges of the hole.
Round off the sides of the patch 2 and pull
off the protective foil.
Place the patch 2 on the hole and press it
down firmly. If necessary, stand a heavy object
on the patch