Creative GH0130 User Manual

PC GAMING

CONSOLE

PC GAMING

CONSOLE

Sound Blaster Tactic

Omega Gaming Headset

Headset Stand

USB wireless transmitter

Noise-canceling microphone

1.6m micro USB-to-USB cable

Inline Volume Control for Xbox 360

Step 1: Connecting the Headset

(i) To console

* Slide the Console/PC Gaming Mode switch on the transmitter to Console.

3.5mm stereo-to-RCA piggyback cable

Attach the metal rods as illustrated.

0.4m micro USB-to-USB cable

Volume Control dial

Microphone Mute switch

(i) To PC/Mac

* Slide the Console/PC Gaming Mode switch on the transmitter to PC.

Composite AV cable

Sound Blaster Tactic3D

Omega Gaming Headset

Model No.: GH0130

3.5mm stereo-to-RCA

USB wireless transmitter

piggyback cable

Micro USB-to-USB cable

(ii) For Xbox 360 only

Headset

Inline Volume Control for Xbox 360

Xbox 360 controller

(iii) Configure audio settings

After connecting the headset to your game console, you need to configure your console’s audio settings.

For Xbox 360

Step 1 : From the main menu, navigate to System Settings -> Console Settings -> Audio -> Digital

Output, then select Digital Stereo

Step 2 : Press the Xbox Guide button on your controller. From the menu, navigate to Settings ->

Preferences -> Voice -> Voice Output, then select either Play Through Headset or Play Through Both

USB wireless transmitter

Micro USB-to-USB cable

(ii) Download and Install Software (For PC and Mac only)

Your headset can be used without installing any software. However to enjoy the full features of your headset, we recommend you to install the drivers and applications.

Visit www.soundblaster.com to download the latest drivers and applications available for this headset.

For all supported Windows

1. If prompted for the audio drivers, click the Cancel button.

2. Navigate to the folder where you have downloaded the software.

3. Double-click the downloaded file.

4. To complete the installation, follow the instructions on the screen.

5. When prompted, restart your computer.

6. Launch the application by clicking Start -> Programs or All Programs -> Creative ->

Sound Blaster Tactic(3D) Omega -> Sound Blaster Tactic(3D) Control Panel

For Mac

1. Double-click the downloaded file to uncompress it.

2. Double-click the uncompressed DMG file.

3. Double-click the Install icon.

4. To complete the installation, follow the instructions on the screen.

5. Go to System Preferences, then click Sound. For both the Output and Input tabs, select Sound Blaster Tactic(3D) Omega

6. Launch the Sound Blaster Tactic(3D) Control Panel from the Applications\

Sound Blaster Tactic(3D) Omega

Creative\

Sound Blaster Tactic3D Control Panel

Use this application to configure your headset settings such as THX TruStudio Pro, TacticProfiles and VoiceFX settings. Detailed information and instructions can be found in the User’s Guide.

www.soundblaster.com

For PS3

Step 1 : From the main menu, navigate to Settings -> Sound Settings -> Audio Output Settings,

then select either Audio Connector/SCART/AV MULTI or HDMI -> Automatic, depending on your setup.

Step 2 : (Only if HDMI is selected in Step 1) From the main menu, navigate to Audio Multi-Output, then select On.

From the main menu, navigate to Accessory Settings -> Audio Device Settings, then

change both Input Device and Output Device to Sound Blaster Tactic(3D) Omega.

Step 2: Charging the Headset

When using your headset for the first time, you should charge the headset for at least 8 hours. Connect your headset to the wireless transmitter and turn off the headset while charging. The Power LED flashes red when charging, and lights up red when fully charged.

Step 3: Using the headset

Your headset and wireless transmitter are paired together and are ready to use. If you wish to pair them manually, refer to the user’s guide.

Wearing the headset

Adjust the headband so that the headset rests lightly on your head. Do not tighten excessively.

CAUTION: Adjust headset volume to a comfortable level. Do not listen to audio

Note: You can also

connect it to the USB port on your PC/Mac

on your headset at high volumes for prolonged periods of time as hearing loss might result.

Other Information

Product Registration

Registering your product ensures you receive the most appropriate service and product support available. You can register your product at register.creative.com. Please note that your warranty rights are not dependent on registration.

Technical & Customer Support Services

Go to support.creative.com to resolve and troubleshoot technical queries at Creative’s 24-hour self-help Knowledge Base. You can also find Customer Support Services and other helpful information here.

Copyright © 2011 Creative Technology Ltd. All rights reserved. The Creative logo, Sound Blaster, the Sound Blaster logo, Tactic3D are trademarks or registered trademarks of Creative Technology Ltd. in the United States and/or other countries.

PN 03GH013000004 Rev.A

THX and the THX TruStudio Pro logo are trademarks of THX Ltd. which may be registered in some jurisdictions. All other trademarks are the property of their respective owners.

Warranty

Warranty information is supplied with your product.

Please keep your Proof of Purchase for the duration of the Warranty period.

Safety and Regulatory Information

Safety and regulatory information can be found in the User’s Guide.

User’s Guide

For detailed product information and instructions, download the user’s guide at

www.soundblaster.com