Creative Sound Blaster Tactic360 Ion, GA0150, HS450 User Manual

Test Report No. 2024608/EE Date : Sep 08 2011 Page 1 of 19

FCC Test Report (Verification)

Application No.:

Applicant:

Address of Applicant:

Manufacturer/Factory:

Address of Manufacturer

/Factory:

SZEM1108002755IT (2024608/EE)

Creative Technology Ltd.

31 International Business Park, Creative Resource, Singapore 609921

Dong Guan Tai Sing Manufacturing Factory

Tai Sing Industrial Road, Bai Zhou Bian Village, Dong Cheng, Dongguan
City, Guangdong Province 523113, P.R. China

Equipment Under Test (EUT):

EUT Name: Audio accessory

Item No.: GA0150 + HS450

Trade: Creative Labs

Standards:

Date of Receipt:

Date of Test:

Date of Issue:

FCC PART15 SUBPART B:2010

2011-08-04

2011-08-08 to 2011-08-09

2011-09-08

Test Result : Pass*

* In the configuration tested, the EUT complied with the standards specified above.

Jack Zhang

EMC Laboratory Manager

The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report.
If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new
system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS
International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by
SGS International Electrical Approvals in writing.
The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of
the federal government. All test results in this report can be traceable to National or International Standards.

This document is issued by the Company subject to its General Conditions o f Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm
electronic format documents, subject to Terms and Conditions fo r Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and
jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of
Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document do es not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or
appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.

Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS Hong Kong Ltd. 5/F - 8/F & 28/F -29/F, Metropole Square, 2 On Yiu Street, Siu Lek Yuen, Shatin, N.T., Hong Kong. t (852) 2334 4481-9 f (852) 2764 3126 www.hk.sgs.com

Member of the SGS Group (SGS SA)

and, for

Test Report No. 2024608/EE Date : Sep 08 2011 Page 2 of 19

Test Summary

Test Test Requirement Test Method Class / Severity Result

Radiated Emission
(30MHz to 1GHz)

Conducted Emission

(150kHz to 30MHz)

FCC PART 15,

SUBPART B: 2010

FCC PART 15,

SUBPART B: 2010

ANSI C63.4:2009 Class B PASS

ANSI C63.4:2009 Class B PASS

This document is issued by the Company subject to its General Conditions o f Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm
electronic format documents, subject to Terms and Conditions fo r Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and
jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of
Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document do es not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or
appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.

Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS Hong Kong Ltd. 5/F - 8/F & 28/F -29/F, Metropole Square, 2 On Yiu Street, Siu Lek Yuen, Shatin, N.T., Hong Kong. t (852) 2334 4481-9 f (852) 2764 3126 www.hk.sgs.com

Member of the SGS Group (SGS SA)

and, for

Test Report No. 2024608/EE Date : Sep 08 2011 Page 3 of 19

Contents

Page

1 COVER PAGE ........................................................................................................................................... 1

2 TEST SUMMARY ...................................................................................................................................... 2

3 CONTENTS ............................................................................................................................................... 3

4 GENERAL INFORMATION ....................................................................................................................... 4

4.1 DETAILS OF E.U.T. .............................................................................................................................. 4

4.2 DESCRIPTION OF SUPPORT UNITS ........................................................................................................ 4

4.3 STANDARDS APPLICABLE FOR TESTING................................................................................................. 4

4.4 TEST LOCATION................................................................................................................................... 4

4.5 TEST FACILITY..................................................................................................................................... 5

4.6 DEVIATION FROM STANDARDS.............................................................................................................. 5

4.7 ABNORMALITIES FROM STANDARD CONDITIONS..................................................................................... 5

5 EQUIPMENTS USED DURING TEST ....................................................................................................... 6

6 TEST RESULTS ........................................................................................................................................ 8

6.1 CONDUCTED EMISSIONS MAINS TERMINALS, 150KHZ TO 30MHZ........................................................... 8

6.1.1 E.U.T. Operation ........................................................................................................................... 8

6.1.2 Measurement Data........................................................................................................................ 8

6.2 RADIATED EMISSIONS, 30MHZ TO 1GHZ ............................................................................................ 11

6.2.1 E.U.T. Operation ......................................................................................................................... 11

6.2.2 Measurement Data...................................................................................................................... 11

7 PHOTOGRAPHS ..................................................................................................................................... 14

7.1 CONDUCTED EMISSION TEST SETUP................................................................................................... 14

7.2 RADIATD EMISSION TEST SETUP ........................................................................................................ 14

7.3 EUT CONSTRUCTIONAL DETAILS................................................................................................... 15-19

This document is issued by the Company subject to its General Conditions o f Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm
electronic format documents, subject to Terms and Conditions fo r Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and
jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of
Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document do es not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or
appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.

Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS Hong Kong Ltd. 5/F - 8/F & 28/F -29/F, Metropole Square, 2 On Yiu Street, Siu Lek Yuen, Shatin, N.T., Hong Kong. t (852) 2334 4481-9 f (852) 2764 3126 www.hk.sgs.com

Member of the SGS Group (SGS SA)

and, for

Test Report No. 2024608/EE Date : Sep 08 2011 Page 4 of 19

General Information

Details of E.U.T.

Power Supply:

USB cable: 350cm

Description of Support Units

The EUT has been tested with associated equipment below.

Description Manufacturer Model No.

Xbox 360 CONSOLE (Microsoft Corporation) Supplied by client 002870411208

Headphone

DC 5V supply by XBOX 360 USB port

Supplied by client N/A

Samsung Television Samsung 2232MW

Standards Applicable for Testing

The customer requested FCC tests for Audio accessory.
The standard used was FCC PART 15, SUBPART B, CLASS B.

Test Location

All tests were performed at:

SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch E&E Lab,

No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Shenzhen, Guangdong, China.

518057.

Tel: [phone] Fax: [phone]

No tests were sub-contracted.

This document is issued by the Company subject to its General Conditions o f Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm
electronic format documents, subject to Terms and Conditions fo r Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and
jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of
Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document do es not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or
appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.

Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS Hong Kong Ltd. 5/F - 8/F & 28/F -29/F, Metropole Square, 2 On Yiu Street, Siu Lek Yuen, Shatin, N.T., Hong Kong. t (852) 2334 4481-9 f (852) 2764 3126 www.hk.sgs.com

Member of the SGS Group (SGS SA)

and, for

CSTC Standards Technical Services Co., Ltd. has been

radio equipment testing with

Test Report No. 2024608/EE Date : Sep 08 2011 Page 5 of 19

Test Facility

The test facility is recognized, certified, or accredited by the following organizations:

• CNAS (No. CNAS L2929)

CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab

to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration

Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration

Laboratories) for the competence in the field of testing.

• VCCI

The 3m Semi-anechoic chamber and Shielded Room (7.5m x 4.0m x 3.0m) of SGS-CSTC Standards

Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary

Control Measures with Registration No.: R-2197 and C-2383 respectively.

Date of Registration: September 29, 2008. Valid until September 28, 2011.

• FCC – Registration No.: 556682

SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been registered

and fully described in a report filed with the (FCC) Federal Communications Commission. The

acceptance letter from the FCC is maintained in our files. Registration 556682, March 16, 2011

• Industry Canada (IC)

The 3m Semi-anechoic chamber of SGS-

registered by Certification and Engineering Bureau of Industry Canada for

Registration No.: 4620C-1.

Deviation from Standards

None.

Abnormalities from Standard Conditions

None.

This document is issued by the Company subject to its General Conditions o f Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm
electronic format documents, subject to Terms and Conditions fo r Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and
jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of
Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document do es not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or
appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.

Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS Hong Kong Ltd. 5/F - 8/F & 28/F -29/F, Metropole Square, 2 On Yiu Street, Siu Lek Yuen, Shatin, N.T., Hong Kong. t (852) 2334 4481-9 f (852) 2764 3126 www.hk.sgs.com

and, for

Member of the SGS Group (SGS SA)

Fischer Custom

Fischer Custom

Fischer Custom

EMI Test Receiver

Test Report No. 2024608/EE Date : Sep 08 2011 Page 6 of 19

Equipments Used during Test

Conducted Emission

Item Test Equipment Manufacturer Model No.

Inventory
No.

1 Shielding Room ZhongYu Electron GB-88 SEL0042 2011-06-10 2012-06-10

2 LISN Rohde & Schwarz ENV216 SEL0152 2010-10-27 2011-10-26

Cal.Date

(yyyy-mm-dd

Cal.Due date

)

(yyyy-mm-dd

)

3 8 Line ISN

Communications

FCC-TLISN-T8-02EMC0120 2011-01-17 2012-01-17

Inc.

4 4 Line ISN

Communications

FCC-TLISN-T4-02EMC0121 2011-01-17 2012-01-17

Inc.

5 2 Line ISN

Communications

FCC-TLISN-T2-02EMC0122 2011-01-17 2012-01-17

Inc.

6

Rohde & Schwarz ESCI SEL0022 2011-05-26 2012-05-26

7 Coaxial Cable SGS N/A SEL0024 2011-05-29 2012-05-29

This document is issued by the Company subject to its General Conditions o f Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm
electronic format documents, subject to Terms and Conditions fo r Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and
jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of
Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document do es not exonerate parties to a transaction from exercising all their rights and obligations under the
transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or
appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.

Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS Hong Kong Ltd. 5/F - 8/F & 28/F -29/F, Metropole Square, 2 On Yiu Street, Siu Lek Yuen, Shatin, N.T., Hong Kong. t (852) 2334 4481-9 f (852) 2764 3126 www.hk.sgs.com

and, for

Member of the SGS Group (SGS SA)