How it Works
Crane Merchandising Systems
Loading...
160
Parts List
97 pgs2.44 Mb0

Crane Merchandising Systems 159, 160 Parts List

Download
Snackvendor Models 159 - 160 Parts Manual
LIST OF FIGURES
FIGURE 1. STANDARD DOOR ASSEMBLY ........................................................................................ 2
FIGURE 2. GENERATION DOOR ASSEMBLY ....................................................................................4
FIGURE 3. LIGHT ASSEMBLY - UPPER - DOOR ...............................................................................6
FIGURE 4. DOOR LOCK GUARD ACCESSORY .................................................................................8
FIGURE 6. STANDARD TRIM ............................................................................................................12
FIGURE 7. GENERATION TRIM ........................................................................................................ 14
FIGURE 8. COIN RECEPTACLE ASSEMBLY ...................................................................................16
FIGURE 9. DOOR LOCK AND HANDLE ASSEMBLY ....................................................................... 18
FIGURE 10. DELIVERY PAN ASSEMBLY ............................................................................................20
FIGURE 11. GUM AND MINT UNIT...................................................................................................... 24
FIGURE 12. LEG, LEVELER, AND LEG AND HINGE ASSEMBLIES ....................................................32
FIGURE 13. COMMON CABINET .......................................................................................................34
FIGURE 14. POWER PANEL ASSEMBLY - 115 VOLT .......................................................................42
FIGURE 15. POWER PANEL ASSEMBLY - 120 VOLT EXEC. ............................................................44
FIGURE 16. POWER PANEL ASSEMBLY - 230 VOLT .......................................................................46
FIGURE 17. MONETARY PANEL ASSEMBLY.....................................................................................48
FIGURE 18. CARD READER AND BILL VALIDATOR COMBINATIONS .............................................56
FIGURE 19. CANDY TRAY ASSEMBLY ...............................................................................................60
FIGURE 20. SNACK TRAY ASSEMBLY...............................................................................................64
FIGURE 21. GUM AND MINT TRAY ASSEMBLY ................................................................................68
FIGURE 22. BASE PLATE ASSEMBLY ...............................................................................................72
FIGURE 23. WIRING HARNESSES ......................................................................................................74
LIST OF TABLES
TABLE 1. STANDARD DOOR ASSEMBLY ........................................................................................ 3
TABLE 2. GENERATION DOOR ASSEMBLY ....................................................................................5
TABLE 3. LIGHT ASSEMBLY - UPPER - DOOR ............................................................................... 7
TABLE 4. DOOR LOCK GUARD ACCESSORY .................................................................................9
TABLE 5. TRIM PANELS ................................................................................................................. 11
TABLE 6. STANDARD TRIM ............................................................................................................13
TABLE 7. GENERATION TRIM ........................................................................................................15
TABLE 8. COIN RECEPTACLE ASSEMBLY ...................................................................................17
TABLE 9. DOOR LOCK AND HANDLE ASSEMBLY ....................................................................... 19
TABLE 10. DELIVERY PAN ASSEMBLY ........................................................................................... 21
TABLE 11. GUM AND MINT UNIT .....................................................................................................25
TABLE 12. BAG ASSEMBLIES ..........................................................................................................30
TABLE 13. LEG, LEVELER, AND LEG AND HINGE ASSEMBLIES ...................................................33
TABLE 14. COMMON CABINET .......................................................................................................35
TABLE 15. POWER PANEL ASSEMBLY - 115 VOLT ....................................................................... 43
TABLE 16. POWER PANEL ASSEMBLY - 120 VOLT EXEC. ............................................................ 45
TABLE 17. POWER PANEL ASSEMBLY - 230 VOLT ....................................................................... 47
TABLE 18. MONETARY PANEL ASSEMBLY ....................................................................................49
TABLE 19. MONETARY INSTRUCTION INSERTS ............................................................................55
TABLE 20. CARD READER AND BILL VALIDATOR COMBINATIONS ............................................. 57
TABLE 21. BILL VALIDATOR OPTIONS ............................................................................................ 58
TABLE 22. CARD READER OPTIONS ...............................................................................................58
TABLE 23. COIN MECHANISM OPTIONS ........................................................................................59
TABLE 24. CANDY TRAY ASSEMBLY ..............................................................................................61
TABLE 25. SNACK TRAY ASSEMBLY .............................................................................................. 65
TABLE 26. GUM AND MINT TRAY ASSEMBLY ...............................................................................69
TABLE 27. SPIRAL OPTIONS ...........................................................................................................71
TABLE 28. BASE PLATE ASSEMBLY ............................................................................................... 73
1590035 4 June, 1998
Snackvendor Models 159 - 160 Parts Manual
LIST OF TABLES
TABLE PAGE
1. Standard Door Assembly ......................................................................................................................3
2. Generation Door Assembly ...................................................................................................................5
3. Light Assembly - Upper - Door ............................................................................................................. 7
4. Door Lock Guard Accessory .................................................................................................................9
5. Trim Panels .........................................................................................................................................11
6. Standard Trim .....................................................................................................................................13
7. Generation Trim ..................................................................................................................................15
8. Coin Receptacle Assembly ................................................................................................................. 17
9. Door Lock and Handle Assembly .......................................................................................................19
10. Delivery Pan Assembly ....................................................................................................................... 21
11. Gum and Mint Unit (Part 1 of 2) ..........................................................................................................25
12. Gum and Mint Unit (Part 1 of 2) ..........................................................................................................27
13. Leg, Leveler, and Leg and Hinge Assemblies .....................................................................................31
14. Common Cabinet (Part 1 of 4) ............................................................................................................ 33
15. Common Cabinet (Part 2 of 4) ............................................................................................................ 35
16. Common Cabinet (Part 3 of 4) ............................................................................................................ 37
17. Common Cabinet (Part 4 of 4 .............................................................................................................39
18. Power Panel Assembly - 115 Volt ....................................................................................................... 41
19. Power Panel Assembly - 120 Volt Exec. ............................................................................................. 43
20. Power Panel Assembly - 230 Volt ....................................................................................................... 45
21. Monetary Panel Assembly (Part 1 of 4) ............................................................................................... 47
22. Monetary Panel Assembly (Part 2 of 4) ............................................................................................... 49
23. Monetary Panel Assembly (Part 3 of 4) ............................................................................................... 51
24. Monetary Panel Assembly (Part 4 of 4) ............................................................................................... 53
24 A. Monetary Instruction Inserts ............................................................................................................... 53
25. Card Reader and Bill Validator Combinations .................................................................................... 55
25 A. Bill Validator Options .......................................................................................................................... 56
25 B. Card Reader Options.......................................................................................................................... 56
25 C. Coin Mechanism Options ................................................................................................................... 57
26. Candy Tray Assembly (Part 1 of 2) ..................................................................................................... 59
27. Candy Tray Assembly (Part 2 of 2 ......................................................................................................61
28. Snack Tray Assembly (Part 1 of 2) ......................................................................................................63
29. Snack Tray Assembly (Part 2 of 2) ......................................................................................................65
30. Gum and Mint Tray Assembly (Part 1 of 2) .........................................................................................67
31. Gum and Mint Tray Assembly (Part 2 of 2) .........................................................................................69
31 A. Spiral Options ..................................................................................................................................... 69
32. Base Plate Assembly ..........................................................................................................................71
33. Labels Used With 9985043 .................................................................................................................76
v 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE PAGE
vi 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
LIST OF FIGURES
FIGURE.................................................................................................................................................PAGE
3. Light Assembly - Upper - Door ......................................................................................................... 6
4. Door Lock Guard Accessory ............................................................................................................. 8
5. Trim Panels...................................................................................................................................... 10
6. Standard Trim.................................................................................................................................. 12
7. Generation Trim............................................................................................................................... 14
8. Coin Receptacle Assembly ............................................................................................................. 16
9. Door Lock and Handle Assembly.................................................................................................... 18
10. Delivery Pan Assembly.................................................................................................................... 20
11. Gum and Mint Unit (Part 1 of 2)....................................................................................................... 24
12. Gum and Mint Unit (Part 1 of 2)....................................................................................................... 26
13. Leg, Leveler, and Leg and Hinge Assemblies................................................................................. 30
14. Common Cabinet (Part 1 of 4)......................................................................................................... 32
15. Common Cabinet (Part 2 of 4)......................................................................................................... 34
16. Common Cabinet (Part 3 of 4)......................................................................................................... 36
17. Common Cabinet (Part 4 of 4.......................................................................................................... 38
18. Power Panel Assembly - 115 Volt ................................................................................................... 40
19. Power Panel Assembly - 120 Volt Exec. ......................................................................................... 42
20. Power Panel Assembly - 230 Volt ................................................................................................... 44
21. Monetary Panel Assembly (Part 1 of 4) .......................................................................................... 46
22. Monetary Panel Assembly (Part 2 of 4) ........................................................................................... 48
23. Monetary Panel Assembly (Part 3 of 4) .......................................................................................... 50
24. Monetary Panel Assembly (Part 4 of 4) .......................................................................................... 52
25. Card Reader and Bill Validator Combinations................................................................................. 54
30. Gum and Mint Tray Assembly (Part 1 of 2) ..................................................................................... 66
31. Gum and Mint Tray Assembly (Part 2 of 2) ..................................................................................... 68
32. Base Plate Assembly....................................................................................................................... 70
33. Wiring Harnesses (Part 1.................................................................................................................... 72
1590035 vii June, 1998
Snackvendor Models 159 - 160 Parts Manual
FIGURE ................................................................................................................................................ PAGE
viii 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
MODEL IDENTIFICATION
160
(GENERATION STYLE)
1590035 9 June, 1998
159
(TRIM STYLE)
Snackvendor Models 159 - 160 Parts Manual
Figure 1. Standard Door Assembly
10 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 29. STANDARD DOOR ASSEMBLY
INDEX PART NUMBER DESCRIPTION QTY.
1
2
- 1451097 SCREW (ATTACHING PART FOR INDEX # 2) 7
3
4 1572028 RETAINER - ROD SUPPORT - COMMON 1 5 1479140 ROD - SUPPORT - GUM & MINT 1 6 1572027 SUPPORT - PROP ROD - COMMON 1
7
8
- 1451097 SCREW (ATTACHING PART FOR INDEX # 8) 4
9 1211105 1/4-20 KEPS NUT EXT LW ZP 1 10 1142017 BUSHING - DOOR CHECK 1 11 1571037 CAP - VINYL - .281 ID X .50 LONG 1 12 1572009 ROD - DOOR CHECK 1 13 1572007 WELD ASSEMBLY - DOOR CHECK 1 14 6232031 HINGE ASSEMBLY - DOOR - LOWER 1 15 4242145 BEARING - THRUST - LOWER HINGE 1 16 6232036 SCREW - 5/16-18 X .75 FLAT HEAD SOCKET 1 17 6232208 WELD SCREW - #1/4-20 X 1" LG 1 18 1211105 1/4 - 20 KEPS NUT EXT LW ZP 1 19 1472250 GUIDE - LOCK BAR 1 20 1472178 LOCK BAR ASSEMBLY 1 21 1472048 PLATE - GLASS RETAINING 1
- 1451097 SCREW (ATTACHING PART FOR INDEX # 21) 7
22
23
24 1211105 NUT 1 25 6232028 PLATE ASSEMBLY - HINGE MOUNTING 1
1572225 WELD ASSEMBLY - STANDARD DOOR (159) 1582069 WELD ASSEMBLY - STANDARD DOOR (160) 1572020 RETAINER - GLASS (159) 1582009 RETAINER - GLASS (160)
1572017
1582004
1402120 CHANNEL - GLASS - LOWER (159) 1462008 CHANNEL - GLASS - LOWER (160) 1472220 STANDARD PANEL ASSEMBLY - GLASS - LOWER (159) 1602026 STANDARD PANEL ASSEMBLY - GLASS - LOWER (160)
1452059 GLASS - DISPLAY (159)
1582075 GLASS - DISPLAY (160)
1452210 LEXAN DISPLAY GLASS (AVAILABLE ACCESSORY) (159)
1582089 LEXAN DISPLAY GLASS (AVAILABLE ACCESSORY) (160)
1702010 CHANNEL - GLASS - UPPER 112. 28 IN. LONG (159)
1712002 CHANNEL - GLASS - UPPER - 106.16 IN. LONG (160)
LIGHT ASSEMBLY - UPPER - DOOR (25W) (120 V MODEL 159) (SEE FIGURE 3 FOR DETAILS)
LIGHT ASSEMBLY - UPPER - DOOR (20 W) (120 V MODEL 160, AND ALL 230 V MODELS)
OPT.
1
1
1
1
1
1
1
1590035 11 June, 1998
Snackvendor Models 159 - 160 Parts Manual
Figure 2. Generation Door Assembly
12 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 30. GENERATION DOOR ASSEMBLY
INDEX PART NUMBER DESCRIPTON QTY.
1
2 1572020 RETAINER - GLASS 1
- 1451097 SCREW (ATTACHING PART FOR INDEX # 2) 7
3
4 1572028 RETAINER - ROD SUPPORT - COMMON 1
5 1479140 ROD - SUPPORT - GUM & MINT 1
6 1572027 SUPPORT - PROP ROD - COMMON 1
7
8
- 1451097 SCREW (ATTACHING PART FOR INDEX # 8) 4
9 1211105 1/4-20 KEPS NUT EXT LW ZP 1 10 1142017 BUSHING - DOOR CHECK 1 11 1571037 CAP - VINYL - .281 ID X .50 LONG 1 12 1572009 ROD - DOOR CHECK 1 13 1572007 WELD ASSEMBLY - DOOR CHECK 1 14 6232031 HINGE ASSEMBLY - DOOR - LOWER 1 15 4242145 BEARING - THRUST - LOWER HINGE 1 16 6232036 SCREW - 5/16-18 X .75 FLAT HEAD SOCKET 1 17 6232208 WELD SCREW - #1/4-20 X 1" LG 1 18 1211105 1/4 - 20 KEPS NUT EXT LW ZP 1 19 1592056 GUIDE - LOCK BAR 1 20 1472178 LOCK BAR ASSEMBLY 1 21 1472048 PLATE - GLASS RETAINING 1
- 1451097 SCREW (ATTACHING PART FOR INDEX # 21) 7
22
23 2222124 24 1211105 NUT 1
25 6232028 PLATE ASSEMBLY - HINGE MOUNTING 1 26 1211105 NUT 1 27 6232028 PLATE ASSEMBLY - HINGE MOUNTING 1
1592064 WELD ASSEMBLY - GENERATION DOOR (159) 1602050 WELD ASSEMBLY - GENERATION DOOR (160)
1572017
1582004
1402120 CHANNEL - GLASS - LOWER (159) 1592073 CHANNEL - GLASS - LOWER (160) 1592071 PANEL ASSEMBLY - GLASS - LOWER (159) 1602053 PANEL ASSEMBLY - GLASS - LOWER (160)
1452209 GLASS - DISPLAY (159) 1582075 GLASS - DISPLAY (160) 1452210 LEXAN DISPLAY GLASS (AVAILABLE ACCESSORY) (159) 1582089 LEXAN DISPLAY GLASS (AVAILABLE ACCESSORY) (160)
LIGHT ASSEMBLY - UPPER - DOOR (25W) (120 V MODEL 159) (SEE FIGURE 3 FOR DETAILS)
LIGHT ASSEMBLY - UPPER - DOOR (20 W) (120 V MODEL 160, AND ALL 230 V MODELS)
CHANNEL - GLASS - HOR. & VERT. (159) - 112.28 IN. LONG CHANNEL - GLASS - HOR. & VERT. (159) - 106.16 IN. LONG
OPT.
1
1
1
1
1
-
1590035 13 June, 1998
Snackvendor Models 159 - 160 Parts Manual
Figure 3. Light Assembly - Upper - Door
14 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 31. LIGHT ASSEMBLY - UPPER - DOOR
INDEX PART NUMBER DESCRIPTION QTY.
1572017
­1582004
1 1572046 PLATE - BALLAST (230V MODELS) 1 2 1572047 COVER - BALLAST - EUROPE (230 V MODULES) 1
3
4 3107171 SCREW - #4-36 X 5/8 RHS 2
5
6 1572045 COVER - LIGHT SOCKET - LEFT (230 V MODELS) 1
7
8 3156032 JUMPER - FILTER & FLUORESCENT LIGHT 1
9
10
11
12 1572044 COVER - LIGHT SOCKET - RIGHT (230 V MODELS) 1
13 1452076 SCREW - #4-36 X .437 RHS 2
1572039 BRACKET - LIGHT - COMMON -25 WATT (159)
1582025 BRACKET - LIGHT - COMMON - 20 WATT (160)
2302218 STARTER - 25 WATT (115 VOLT MODEL 159)
2222095 STARTER - 20 WATT (ALL 230 VOLT MODELS)
6339006 HARNESS - FLUORESCENT LIGHT (159)
1582005 HARNESS - FLUORESCENT LIGHT (160)
1451124 SUPPRESSION NETWORK ASSEMBLY (115 VOLT)
6332010 SUPPRESSION NETWORK ASSEMBLY (230 VOLT)
6152188 BALLAST (115 VOLT MODEL 159)
1572016 BALLAST (ALL 230 VOLT MODELS)
1122138
1172115 FLUORESCENT LAMP - 25 WATT (115 VOLT MODEL 159)
LIGHT ASSEMBLY - UPPER - DOOR (120 VOLT - MODEL 159) (INCLUDES INDEX NUMBERS 1 - 4)
LIGHT ASSEMBLY - UPPER - DOOR (120 VOLT - MODEL 160 AND 230 VOLT MODELS 159 AND 160) (INCLUDES INDEX NUMBERS 1
- 4)
FLUORESCENT LAMP - 20 WATT (ALL EXCEPT 115 VOLT MODEL
159)
-
-
1
1
1
1
13151058 BALLAST (115 VOLT MODEL 160)
1
1590035 15 June, 1998
Snackvendor Models 159 - 160 Parts Manual
Figure 4. Door Lock Guard Accessory
16 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 32. DOOR LOCK GUARD ACCESSORY
INDEX PART NUMBER DESCRIPTION QTY.
- 1572188
1 2222031 T-BOLT - TRIM 4 2 1572186 GUARD - LOCK 1 3 9900081 NUT - #8-32 - KEPS - ZINC PLATE 4
- 1572187 TEMPLATE AND INSTRUCTIONS (NOT SHOWN) 1
NOTE This accessory requires drilling holes for T-bolts.
DOOR LOCK GUARD KIT (INCLUDES ALL THE FOLLOWING ITEMS)
-
1590035 17 June, 1998
Snackvendor Models 159 - 160 Parts Manual
Figure 5. Trim Panels
18 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 33. TRI M P A N E L S
INDEX PART NUMBER DESCRIPTION QTY.
1592039 LEFT HAND TRIM PANEL - T. LIGHT GRAY
1
1592036 LEFT HAND TRIM PANEL - SPECIAL COLOR (160 ONLY) 1592034 TOP TRIM PANEL - T. MEDIUM GRAY (159) 1602029 TOP TRIM PANEL - T. MEDIUM GRAY (160)
2
3
4 1575047 CASTING - MONETARY FRAME - BLACK 1 5 1572011 TRIM - COIN CUP - BLACK 1
6
1592043 TOP TRIM PANEL - T. BLACK (159) 1602040 TOP TRIM PANEL - T. BLACK (160) 1602028 TOP TRIM PANEL - SPECIAL COLOR (160 ONLY) 1592038 RIGHT HAND TRIM PANEL - T. LIGHT GRAY
1592035 RIGHT HAND TRIM PANEL - SPECIAL COLOR (160 ONLY)
1592040 BOTTOM TRIM PANEL - T. MEDIUM GRAY (159) 1602036 BOTTOM TRIM PANEL - T. MEDIUM GRAY (160) 1592042 BOTTOM TRIM PANEL - T. BLACK (159) 1602041 BOTTOM TRIM PANEL - T. BLACK (160)
11592045 LEFT HAND TRIM PANEL - T. BLACK
1
11592044 RIGHT HAND TRIM PANEL - T. BLACK
1
1602035
BOTTOM TRIM PANEL - SPECIAL COLOR (160 ONLY)
1590035 19 June, 1998
Snackvendor Models 159 - 160 Parts Manual
Figure 6. Standard Trim
20 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 34. STANDARD TRIM
INDEX PART NUMBER DESCRIPTION QTY.
1
2
3
1592069 TRIM - DOOR - SIDE - BLACK 1592031 TRIM - DOOR - INSIDE - CLEAR 1592068 TRIM - DOOR - INSIDE - BLACK 1592041 TRIM PANEL - GLASS - LOWER - BLACK
2
2
1
1602037 TRIM PANEL - GLASS - LOWER - BLACK 1592030 TRIM - DOOR - HORIZONTAL - CLEAR (159)
1592032 TRIM - DOOR - SIDE - CLEAR
4
1602030 TRIM - DOOR - HORIZONTAL - CLEAR (160)
1
1592067 TRIM - DOOR - HORIZ - BLACK (159) 1602016 TRIM - DOOR - HORIZ - BLACK (160)
CORNER OF DOOR WELD
DOOR WELD
DETAIL A
4 REF
BOTTOM TRIM PANEL
1 REF
SIDE
PANEL
6 REF
DETAIL C
2 REF
DETAIL B
159p0042
1590035 21 June, 1998
Snackvendor Models 159 - 160 Parts Manual
Figure 7. Generation Trim
22 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 35. GENERATION TRIM
INDEX PART NUMBER DESCRIPTION QTY.
1 1592063 DECAL - TRIM - VERTICAL 2
2
3
1592060 DECAL - TRIM - HORIZONTAL - TOP (159) 1602048 DECAL - TRIM - HORIZONTAL - TOP (160) 1592061 DECAL - TRIM - HORIZONTAL - BOTTOM (159) 1602049 DECAL - TRIM - HORIZONTAL - BOTTOM (160)
2
1
1590035 23 June, 1998
Snackvendor Models 159 - 160 Parts Manual
Figure 8. Coin Receptacle Assembly
24 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 36. COIN RECEPTACLE ASSEMBLY
INDEX PART NUMBER DESCRIPTION QTY.
1 1572011 TRIM - COIN CUP - BLACK REF. 2 4245084 SHAFT - DOOR - COIN RETURN 1 3 4245083 SPRING - COIN RETURN DOOR 1 4 4245082 GATE - COIN RETURN 1 5 1572010 CUP COIN RETURN 1 6 2302053 SPACER - CUP 4 7 4042512 SCREW, #8-32 X 1/2 PHS S/T 4
1590035 25 June, 1998
Snackvendor Models 159 - 160 Parts Manual
Figure 9. Door Lock and Handle Assembly
26 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 37. DOOR LOCK AND HANDLE ASSEMBLY
INDEX PART NUMBER DESCRIPTION QTY.
1 1172190 LEVER - LOCK 1 2 1302291 PIVOT - LEVER LOCK 1 3 1172191 BASE - LEVER LOCK 1 4 2272052 ACTUATOR ASSEMBLY - LOCK BAR 1 5 1302289 CUP SPACER 1 6 1217161 SCREW, #10-32 X 1/2 RHS W/LW 5 7 1302326 SHIELD - LATCH 1 8 9900121 WASHER - STEEL - 7/16 X .203 X .032 1 9 1302324 CATCH - DOOR LATCH 1
10 1302290 LATCH - LOCK LOWER 1
11
- 3112164
9992400 CYLINDER - LOCK
3112163 VAN LOCK
KEY (NOT SHOWN) VAN LOCK APPLICATION (NOT SHOWN)
1
OPT.
1
OPT.
1590035 27 June, 1998
Snackvendor Models 159 - 160 Parts Manual
Figure 10. Delivery Pan Assembly
28 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 38. DELIVERY PAN ASSEMBLY
INDEX PART NUMBER DESCRIPTION QTY.
-
1
- 1170206 SCREW #8-32 X 3/8 THS BLACK 4
- 1402052 NUT CARRIAGE #8-32 4
2
3
- 1170206 SCREW - #8-32 X 3/8 THS BLACK 2
- 1412046 8-32 NUT MF 23TW832 BLOX 2
4
5 4402017 ACTUATOR ASSEMBLY 1
- 9900146 RETAINING RING E TYPE .312 2
- 9900171 WASHER BRASS 9/16 X.315 X.040 2
6 1472145 ACTUATOR - REAR PIVOT 2
- 1170206 SCREW - #8-32X3/8 THS BLACK 1
- 9900202 SCREW - #8-32 X 5/8 PHS W/LKW 1
- 2204093 WASHER - SCAVENGER BAR 1
7
- 7207019 SCREW - #8-18 X 3/8 PHS TAPPING 6
8 1472069 BRACKET - DOOR PIVOT - L.H. 1
- 1170206 SCREW - #8-32 X 3/8 THS BLACK 1
- 9900081 NUT - #8-32 KEPS ZINC PLATE 1
9
- 1170206 SCREW - #8-32 X 3/8 THS BLACK 2
- 9900081 NUT - #8-32 KEPS ZINC PLATE 2
10
- 1306140 8-32X3/8 CARR BOLT BLK/OX 3
- 9900081 NUT #8-32 KEPS ZINC PLATE 3
11
12
1572043 DELIVERY PAN ASSEMBLY (159) 1602039 DELIVERY PAN ASSEMBLY (160) 1412028 CHANNEL - DOOR (159) 1462035 CHANNEL - DOOR (160)
1472228 SHAFT - DOOR PIVOT (159) 1 1482002 SHAFT - DOOR PIVOT (160) 1 1472272 ACTUATOR - DELIVERY DOOR - L.H. (159) 1482252 ACTUATOR - DELIVERY DOOR - L.H. (160)
1472137 DOOR - DELIVERY - GRAY (159) 1582024 DOOR - DELIVERY - GRAY (160)
1472108 LINER - DOOR - PILFERAGE (159) 1482163 LINER - DOOR - PILFERAGE (160)
1572169 DEFLECTOR - COMMON - LARGE SNACK (159)
4852044 DEFLECTOR - L.H. (493)
1412023 FILLER - LEFT (159) 1602034 FILLER - LEFT (160)
1472288 WELD ASSY-DELIVERY PAN (159) 1602038 WELD ASSY-DELIVERY PAN (160) 1472138 ASSEMBLY - REAR DELIVERY DOOR (159) 1482171 ASSEMBLY - REAR DELIVERY DOOR (160)
1
1
1
1
1
11602014 DEFLECTOR - L.H. - SMALL - GLASCO SNACK (160/468/490)
1
1
1
1590035 29 June, 1998
Snackvendor Models 159 - 160 Parts Manual
Figure 10. Delivery Pan Assembly (Continued)
30 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 38. DELIVERY PAN ASSEMBLY (CONTINUED)
INDEX PART NUMBER DESCRIPTION QTY.
13
- 1451097 SCREW - #8-32 X .31 HEX HD.TF - BLK. 4
- 3108030 ACORN NUT 2
14 1472087 WASHER - .38 I.D. X .56 O.D 2 15 1472083 SPACER 2 16 4042556 CANOE CLIP 2 17 2342110 BRACKET - SPRING 1 18 1472068 BRACKET - DOOR PIVOT-R.H. 1
- 1170206 SCREW - #8-32 X 3/8 THS BLACK 1
- 9900081 NUT - #8-32 KEPS ZINC PLATE 1
19 4246044 SPRING - ELEVATOR GUIDE ARM 1 20 1572029 DEFLECTOR - PRODUCT - R.H. 1
- 1170206 SCREW - #8-32 X 3/8 THS BLACK 2
- 9900081 NUT - #8-32 KEPS ZINC PLATE 2
21 1412022 FILLER - RIGHT - BLACK 1
- 1306140 8-32 X 3/8 CARR BOLT BLK/OX 3
- 9900081 NUT - #8-32 KEPS ZINC PLATE 3
22
- 1306140
- 9900081
23 2342109 BUSHING - DELIVERY - LINKAGE 1 24 4402016 PLATE - DOOR RETENTION 1 25 1472156 ACTUATOR ASSEMBLY - RIGHT 1
- 9900146 RETAINING RING E TYPE .312 2
- 9900171 WASHER BRASS 9/16 X.315 X.040 2
26
27
- 1170206 SCREW - #8-32 X 3/8 THS BLACK 2
- 1412046 8-32 NUT MF 23TW832 BLOX 2
28 1472219 SPACER 2 29 1472088 LABEL - GUM & MINT SELECTIONS 1 30 1472105 PRICE LABELS - GUM & MINT ($ AND ¢) 1
1472082 FILLER - DELIVERY PAN (159) 1482159 FILLER - LEFT - GRAY (160)
1472200 PAN - DELIVERY - FRONT - BLACK (159) 1482187 PAN - DELIVERY - FRONT - BLACK (160)
8-32 X 3/8 CARR BOLT BLK/OX (159) 5 8-32 X 3/8 CARR BOLT BLK/OX (160) 4 NUT #8-32 KEPS ZINC PLATE (159) 5 NUT #8-32 KEPS ZINC PLATE (160) 4
1412047 ANGLE - DELIVERY DOOR (159) 1462073 ANGLE - DELIVERY DOOR (160) 1472271 ACTUATOR - DELIVERY DOOR - R.H. (159) 1482251 ACTUATOR - DELIVERY DOOR - R.H. (160)
1
1
1
1
1590035 31 June, 1998
Snackvendor Models 159 - 160 Parts Manual
Figure 11. Gum and Mint Unit (Part 1 of 2)
32 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 39. GUM AND MINT UNIT (PART 1 OF 2)
INDEX PART NUMBER DESCRIPTION QTY.
1 1407048 NUT - 10-32 M/F #21TWA1032 ZP (WITH GUM & MINT UNIT) 2
2 3108030 ACORN NUT - BRASS NICKEL 8-32 (WITHOUT GUM & MINT UNIT) 2
3 1479052 STUD - PIVOT - GUM AND MINT (WITH GUM & MINT UNIT) 2
4 1452139 RETAINER - HARNESS (WITH GUM & MINT UNIT) 1
5
6
7
8
1577000 GUM & MINT COLUMN (159)
1587000 GUM & MINT COLUMN (160)
1577001 ANGLE & MOTOR ASSEMBLY (159)
1587001 ANGLE & MOTOR ASSEMBLY (160)
1479136 FRAME ASSEMBLY - G & M (159)
1489008 FRAME ASSEMBLY - G & M (160)
1479130 MAGAZINE ASSEMBLY - G & M (159)
1489006 MAGAZINE ASSEMBLY - G & M (160)
1472082 FILLER - DELIVERY PAN (159)
1482159 FILLER - DELIVERY PAN (160)
1
1
1
1
1590035 33 June, 1998
Snackvendor Models 159 - 160 Parts Manual
Figure 12. Gum and Mint Unit (Part 1 of 2)
34 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 40. GUM AND MINT UNIT (PART 1 OF 2)
INDEX PART NUMBER DESCRIPTION QTY.
-
1 1579053 RETAINER 3
2 1479103 FILLER - GUM & MINT 2
3 1451097 SCREW - #8-32 X .31 HEX HD. TF -
4
5 3122056 MAGNET RETAINER COIN CHANGER 2
6 1479117 ANGLE MAGNET 2
7 9900201 SCREW #8-32 X 5/16 RHS SEMS MACH ZINC 2
8 4041053 SCREW #10-32 X 3/8 PHS T/C W/LW 2
9 1479139 PULL - DOOR 1
10 1479089 SUPPORT ASSEMBLY - MAGAZINE - UPPER 1
11 1479092 SUPPORT ASSEMBLY - MAGAZINE - LOWER 1
12 1479101 COVER - GUM & MINT 1
13 1479124 LABEL - LOADING - GUM & MINT 1
14
15 6131143 CABLE CLAMP - RICHCO #KKC6 2
16 1457027 SCREW - #8-32 X .81 HEX HD. - T/F 10
17 1479119 MAGNET - RETAINER 2
18 1479095 BRACKET - MAGAZINE 2
19 1479062 STUD - DRIVE ARM 5
20 1479063 ROLLER - DRIVE ARM 5
21 1479145 ARM - DRIVE MOTOR 5
22 9900081 NUT - #8-32 KEPS ZINC PLATE 5
23 1577035 MOTOR & PC BOARD ASSEMBLY 5
24 1479120 CAPLUG - REC. 1/2 X 1 2
25 1412046 NUT - #8-32 MF 23TW832 BLOX 2
26 1479104 HINGE - COVER 1
27 1437204 SCREW - #8-10 X .38 HEX HD. TF 4
28 1479073 CHANNEL - GUM & MINT - LEFT 5
29 1479064 SPACER - COLUMN - GUM & MINT 2
30 1479076 CHANNEL - GUM & MINT - RIGHT - SMALL 3
31 1479077 CHANNEL - GUM & MINT - RIGHT - LARGE 2
32 1572040 LABEL - LOADING LINE - GUM & MINT 1
33 4246307 SPRING - HORIZONTAL SELECTOR ARM 5
34 1479123 DRIVE BAR & STUD ASSEMBLY 5
35 9900425 RETAINING RING - REINF. E TYPE .250 15
1577000 GUM & MINT COLUMN (159)
1587000 GUM & MINT COLUMN (160)
1479136 FRAME ASSEMBLY - GUM & MINT (159)
1489008 FRAME ASSEMBLY - GUM & MINT (160)
1479102 ANGLE - MOTOR (159)
1489005 ANGLE - MOTOR (160)
1
1
-
1590035 35 June, 1998
Snackvendor Models 159 - 160 Parts Manual
Figure 12. Gum and Mint Unit (Part 1 of 2) (Continued)
36 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 40. GUM AND MINT UNIT (PART 1 OF 2) (CONTINUED)
INDEX PART NUMBER DESCRIPTION QTY.
36 9900020 SCREW #8-32 X 1/2 RHS MACH. ZINC 1
37 1479099 PIN - PUSHER 5
38 1479079 PUSHER 5
39 1479080 SPOOL - SPRING 5
40 1479106 SPRING - PUSHER 5
41 1479105 WINDOW - GUM & MINT 1
42 1479078 EJECTOR - GUM & MINT 5
43 1479098 PIN - EJECTOR 5
44 1479097 LINK - EJECTOR 5
45 1479083 PIN - HINGE 5
46 1479082 HINGE - BACK 5
47 1479081 HINGE - FRONT 5
48 1479084 SPRING - HINGE 5
1590035 37 June, 1998
Snackvendor Models 159 - 160 Parts Manual
639p0080
1253467
9
8
10
8
11
Figure 13. Leg, Leveler, and Leg and Hinge Assemblies
38 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 41. LEG, LEVELER, AND LEG AND HINGE ASSEMBLIES
INDEX PART NUMBER DESCRIPTION QTY.
1 6231034 PLUG - HOLE (NOT USED IN ALL APPLICATIONS) 2 2 1172021 NUT - 1/4-20 WHIZ-LOCK 2 3 6231203 PLATE - HINGE LEG BOLT 1 4 1211112 TRAY BOLT 2 5 6231163 LEG, HINGE, AND LEVELER ASSEMBLY 1 6 1471098 LEVELER - CABINET 1 7 1571115 LEG AND HINGE ASSEMBLY 1
8 9900218 SCREW - # 5/16 X 1 W/LOCKING RING 14
9 1471237 LEG AND LEVELER ASSEMBLY - CABINET 3
10 1571127 LEG ASSEMBLY - CABINET 1 11 1471098 LEVELER - CABINET 1
1590035 39 June, 1998
Snackvendor Models 159 - 160 Parts Manual
Figure 14. Common Cabinet (Part 1 of 4)
40 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 42. COMMON CABINET (PART 1 OF 4)
INDEX PART NUMBER DESCRIPTION QTY.
1571185 CABINET ASSEMBLY - N.V.BLACK (159)
1
1581055 CABINET ASSEMBLY - N.V.BLACK (160)
2 1571102 PANEL - FILLER (159) 1 3 1571074 LOCK ARM - CABINET 2 4 1571022 STOP - MONETARY PANEL 2 5 1571119 RAIL MOUNTING CHANNEL - L.H. 1 6 6231242 CHUTE - PAYOUT 1
1571187 BASE FILLER ASSEMBLY - N.V. BLACK (159)
7
1581060 BASE FILLER ASSEMBLY - MILLENIA GRAY (160 CHINA STYLE)
8 1571029 MONEY BOX ASSEMBLY 1
9 1571090 PLATE ASSEMBLY - DOOR CHECK 1 10 6231163 LEG, HINGE & LEVELER ASSEMBLY 1 11 1471237 LEG & LEVELER ASSEMBLY - CABINET 3
1571186 TOP FILLER ASSEMBLY - N.V.BLACK (159)
12
1581059 TOP FILLER ASSEMBLY - MILLENIA GRAY (160 CHINA STYLE)
11581058 CABINET ASSEMBLY - MILLENIA GRAY (160 CHINA STYLE)
11581057 BASE FILLER ASSEMBLY - N.V.BLACK (160)
11581056 TOP FILLER ASSEMBLY - N.V.BLACK (160)
1590035 41 June, 1998
Snackvendor Models 159 - 160 Parts Manual
Figure 15. Common Cabinet (Part 2 of 4)
42 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 43. COMMON CABINET (PART 2 OF 4)
INDEX PART NUMBER DESCRIPTION QTY.
1 1571175 PLATE - PCB RAIL - MOUNTING 1
- - MOUNTING HARDWARE 2
2 1596012 PCB ASSEMBLY - TRAY 1
3 1451097 SCREW - #8-32 X .31 - HEX HD - T/F - BLACK 2
- 1571235
4 1571179 TRAY GUIDE RAIL - W/STANDOFFS 1
5 1596012 PCB ASSEMBLY - TRAY 1
6 1451097 SCREW - #8-32 X .31 - HEX HD - T/F - BLACK 2
- 1571236
- 1571181
TRAY GUIDE RAIL/PCB ASSEMBLY - RIGHT HAND (INCLUES INDEX NUMBERS 4-6)
TRAY GUIDE RAIL ASSEMBLY - RIGHT HAND (TOP TRAY) (NOT SHOWN)
TRAY GUIDE RAIL ASSEMBLY - LEFT HAND (ALL TRAYS) (NOT SHOWN)
*
1
*
* = QUANTITY = 1 PER TRAY IN MACHINE
1590035 43 June, 1998
Snackvendor Models 159 - 160 Parts Manual
Figure 16. Common Cabinet (Part 3 of 4)
44 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 44. COMMON CABINET (PART 3 OF 4)
INDEX PART NUMBER DESCRIPTION QTY.
1 - FAN OPTION OPT.
2 1471398 BRACKET - EXHAUST FAN 1
3
4 9989637 JUMPER - BLOWER 1
5 1471054 BRACKET & SCREEN ASSEMBLY - EXHAUST 1
6 1471090 COVER - FAN HOLE (NO FAN OPTION ONLY) OPT.
7 1471065 BRACKET - MOUNTING - POWER CORD 1
8 1575050 BRACKET - DEBITEK CONTROLLER 1
9 1581039 DEFLECTOR ASSEMBLY - SMALL SNACK (160) 1 10 1571123 DEFLECTOR - LARGE SNACK (159) 1
6231548 BLOWER ASSEMBLY - 120V 6401088 BLOWER ASSEMBLY - 230V
1
1590035 45 June, 1998
Snackvendor Models 159 - 160 Parts Manual
Figure 17. Common Cabinet (Part 4 of 4
46 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 45. COMMON CABINET (PART 4 OF 4
INDEX PART NUMBER DESCRIPTION QTY.
- 1606000 MAIN CONTROL PCB - WITH EPROM (INCLUDES ITEMS 1 AND 2) 1
1 9989678 PCB ASSEMBLY - MAIN CONTROLLER 1
2 SEE LABEL IC ASSEMBLY 1
3 1576008 PCB ASSEMBLY - SNACK INTERFACE 1
4
5
6
7 1571112 COVER - CONTROL/INTERFACE PCB 1
8
9 4761148 LABEL - EARTHING 1
10 1571032 HOUSING - POWER PANEL 1
1571042 LABEL - LED & EPROM - ENGLISH
1571045 LABEL - LED & EPROM - SPANISH
1571154 LABEL - CAUTION - STATIC/ELECT. CONN
1571167 LABEL - CAUTION - STATIC/ELEC. CONN. - SPANISH
6231189 LABEL - WARNING - HIGH VOLTAGE - ENGLISH
6232290 LABEL- WARNING - HI VOLTAGE - SPANISH
1571080
1571136
POWER PANEL ASSEMBLY - 115 V (S.A./U.S.) (SEE FIGURE 18 FOR DETAILS)
POWER PANEL ASSEMBLY - 230V (CHN./S.A.)FIGTITLE: FIGURE 20 . POWER PANEL ASSEMBLY - 230 VOLT
POWER PANEL ASSEMBLY - 120 V EXEC. (MEX) (SEE FIGURE 19 FOR DETAILS)
1
1
1
11571084
1590035 47 June, 1998
Snackvendor Models 159 - 160 Parts Manual
Figure 18. Power Panel Assembly - 115 Volt
48 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 46. POWER PANEL ASSEMBLY - 115 VOLT
INDEX PART NUMBER DESCRIPTION QTY.
- 1701015 POWER PANEL ASSEMBLY - DOMESTIC -
1 9989100 INTERFERENCE FILTER 1
2 9900081 NUT - #8-32 KEPS ZINC PLATE 6
3 9984629 SWITCH - TOGGLE - DPST - 20 AMP 1
4 9989672 BREAKER - 15 AMP 1
5 9989046 24 V TRANSFORMER - DUAL PRI. - .187 TERM 1
6 9989674 CIRCUIT BREAKER - 4 AMP 1
7 1211110 8-32 X 1/4 RHS MACH SCREW - Z.P. 6
8 1701025 PLATE - HOUSING - PANEL 1
- 6849015 JUMPER - POWER SWITCH (MEXICO) (NOT SHOWN) 1
- 9989110 FILTER - POWER LINE - EMI (MEXICO) (NOT SHOWN) 1
1590035 49 June, 1998
Snackvendor Models 159 - 160 Parts Manual
E
T
E
L
O
O
S
B
Figure 19. Power Panel Assembly - 120 Volt Exec.
50 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 47. POWER PANEL ASSEMBLY - 120 VOLT EXEC.
INDEX PART NUMBER DESCRIPTION QTY.
- 1571136 POWER PANEL ASSEMBLY - 120V - EXEC. -
1 9989100 EMI FILTER 1
2 9900081 NUT - #8-32 3
3 1579020 JUMPER - 120 VOLT TO TRANSFORMER 1
4 1571129 PLATE AND STUD ASSEMBLY 1
5 9989042 TRANSFORMER - 115/230 V PRIMARY - 24 V SECONDARY 1
6 9989369 LABEL - ASSEMBLY ID NUMBER 1
7 9984165 JUMPER - GROUND WIRE 1
8 9989336 BREAKER - 3 AMP 1
9 9989673 BREAKER - 20 AMP 1 10 9984629 SWITCH - TOGGLE - DPST - 20 AMP 1 11 1579013 HARNESS - POWER PANEL DOMESTIC 1
12 1571167
13 6232290
14 1571128
15 1211110 #8-32 X 1/4 - R.H. MACHINE SCREW 1
LABEL - CAUTION - ELECTRICAL CONNECTIONS - SPANISH (ENGLISH TRANSLATION SHOWN)
LABEL - WARNING - HIGH VOLTAGE - SPANISH (ENGLISH TRANSLATION SHOWN)
LABEL - POWER CONTROL PANEL - SPANISH (ENGLISH TRANS­LATION SHOWN)
E
T
E
1
1
1
L
O
O
S
B
1590035 51 June, 1998
Snackvendor Models 159 - 160 Parts Manual
13
6 5 4 3 2 1
12
LINE CORD FOR REF. ONLY
11
BRN
BRN
10
9
BLK
8
BLU
YEL
BLU
BLU
BLK
RED
RED
BLU
RED
RED
BLU
BRN
1
2
3
BRN
YEL
4
YEL
7
5
6
167p0007
Figure 20. Power Panel Assembly - 230 V.
52 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 20. POWER PANEL ASSEMBLY - 230 V.
INDEX PART NUMBER DESCRIPTION QTY
- 4521020 POWER PANEL ASSY-U.K.-230V ­1 9989110 MAIN LINE FILTER 1 2 6849015 JUMPER 1 3 1709000 HARNESS 1 4 9989100 E.M.I. FILTER 1 5 9989046 24V XFMR-DUAL PIR.-.187 TERM. 1 6 9984094 GROUND WIRE 1 7 9989674 BREAKER - 4A 1 8 1709001 HARNESS 1 9 9989672 BREAKER-15A 1
10 1709006 JUMPER 1
11 9984629 SWTICH 1 12 1701025 PLATE-HOUSING-PANEL 1 13 4279001 JUMPER 1
1590035 53 June, 1998
Snackvendor Models 159 - 160 Parts Manual
Figure 21. Monetary Panel Assembly (Part 1 of 4)
54 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 48. MONETARY PANEL ASSEMBLY (PART 1 OF 4)
INDEX PART NUMBER DESCRIPTION QTY.
1 1575094
2 9989594 SWITCH - PUSH/PULL - PANEL MOUNTING 1 3 1590033 LABEL - INSTRUCTIONS - DATA - PRICE - PAYOUT 1
4-
5 1595014 LENS - DISPLAY - GPL 1
6 1595017 FACE PLATE ASEMBLY - GPL (SEE FIGURE 24 FOR DETAILS) OPT.
7 1472223 COIN INSERT 1 8 1472222 COIN BLOCK 1
9 -
10 2302053 CUP SPACER ­11 - SCREW -
MONETARY PANEL WELD ASSEMBLY (SEE FIGURE 23 FOR DETAILS)
MONETARY INSERT - UPPER POSITION (SEE FIGURE 25 FOR DETAILS)
MONETARY INSERT - LOWER POSITION (SEE FIGURE 51 A FOR DETAILS)
1
-
-
1590035 55 June, 1998
Snackvendor Models 159 - 160 Parts Manual
Figure 22. Monetary Panel Assembly (Part 2 of 4)
56 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 49. MONETARY PANEL ASSEMBLY (PART 2 OF 4)
INDEX PART NUMBER DESCRIPTION QTY.
1 1595029 COVER - DISPLAY 1 2 1475099 BRACKET - PCB DISPLAY 1 3 9989685 PCB ASEMBLY - DISPLAY 1
1571154
4
5 3122056 MAGNET - COIN CHANGER RETAINER 1 6 1475026 BUTTON - COIN RETURN 2 7 1475072 SHAFT - RETURN BUTTON 1 8 1575048 PLATE - INSERT BACKING (SEE FIGURE 52 FOR DETAILS) -
9 1571079 BRACKET - COIN RETURN BUTTON 1 10 1127808 SPRING - SHELF RESET 1 11 1575057 PLATE - MAGNET MOUNTING 1 12 1575003 COIN CHUTE ASSEMBLY 1 13 1570105 LABEL - COIN MECHANISM - 120 V 1 14 1571078 BRACKET - COIN MECHANISM 1 15 6231037 CLAMP - CABLE 1 16 1571113 ARM - SCAVENGER 1 17 2228011 SPACER - RELEASE ARM 1 18 2204093 WASHER - SCAVENGER BAR 1 19 9989594 SWITCH - PUSH/PULL - PANEL MOUNTING REF.
20 1575094 MONETARY PANEL WELD ASSEMBLY REF.
1571167 LABEL - CAUTION - ELECTRICAL CONNECTION - SPANISH 6232291 LABEL - CAUTION - STATIC - SPANISH 1
LABEL - CAUTION - STATIC/ELECT CONNECTION - ENGLISH (CHN./U.S.)
1
1590035 57 June, 1998
Snackvendor Models 159 - 160 Parts Manual
Figure 23. Monetary Panel Assembly (Part 3 of 4)
58 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 50. MONETARY PANEL ASSEMBLY (PART 3 OF 4)
INDEX PART NUMBER DESCRIPTION QTY.
1 1605000 PANEL WELD ASSEMBLY - MONETARY (CHN) 1
2 5004561 PLUG - HOLE - 4 INCH 1
1590035 59 June, 1998
Snackvendor Models 159 - 160 Parts Manual
Figure 24. Monetary Panel Assembly (Part 4 of 4)
60 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 51. MONETARY PANEL ASSEMBLY (PART 4 OF 4)
INDEX PART NUMBER DESCRIPTION QTY.
- 1595017 FACEPLATE ASSEMBLY - GPL 1
1 1595013 FRAME - MONETARY PANEL - GPL 1
2 1472251 LENS-PUSH BUTTON 21
3
4 9984630 MEMBRANE SWITCH ASSY-SELECT 1
5 1575091 PLATE-SELECT SWITCH-BACK UP - W/STUD 1
6 1475089 NUT 4
COUNTRY LANGUAGE MONETARY OPTION UPPER INSERT LOWER INSERT
1595002 LETTER SHEET - SELECT SWITCH - GLASCO
1575010 LETTER SHEET - SELECT SWITCH - GPL (SMITH’S ONLY)
TABLE 51 A. MONETARY INSTRUCTION INSERTS
1
COIN & BILL 1575012 N/A
USA
CHINA
SOUTH
AMERICA
MEXICO SPANISH COIN ONLY 1575015 1575040
ENGLISH
SPANISH
* THE CARD READER IS NORMALLY IN THE LOWER MONETARY POSITION.
COIN & CARD 1575013 *
COIN ONLY 1575013 1575035
COIN & BILL 1595007 N/A
COIN ONLY 1595005 1595012
TOKEN ONLY 1595008 1595011
1590035 61 June, 1998
Snackvendor Models 159 - 160 Parts Manual
Figure 25. Card Reader and Bill Validator Combinations
62 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 52. CARD READER AND BILL VALIDATOR COMBINATIONS
INDEX PART NUMBER DESCRIPTION QTY.
1 1575048 BACK-UP PLATE - COIN ONLY APPLICATION 2
2 9900081 NUT - #8-32 KEPS - ZINC PLATE 8
3 - BILL VALIDATOR OPT.
4 - CARD READER OPT.
5 1575048 BACK-UP PLATE - COIN & CARD/TOKEN & CARD 1
1590035 63 June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 52 A. BILL VALIDATOR OPTIONS
USE WITH
PART NUMBER DESCRIPTION
5900198 VALIDATOR - MARS - S2000 - VN 2311 - U5E 1579005 5900182 VALIDATOR - COINCO - BA305A
5900233 VALIDATOR - CONLUX MKA 2152-12B 120V 5900239 VALIDATOR - GPT - CHINA - 5900205 VALIDATOR - MARS - VN2512-U5E - 24V 1579032 5900221 VALIDATOR - COINCO - BA32SA - 24V
5900234 VALIDATOR - CONLUX - 2162 - 24V - 300 1475053
5900248 VALIDATOR - MARS AE 2611 - U5E - SERIAL 1579028
5900182 VALIDATOR - COINCO - BA 30SA 1579034
5900210 VALIDATOR - MARS - VN 2512 - USM/500 - MDB -
5900234 VALIDATOR - CONLUX - 2162 - 24V - 300 1579050
5900247 VALIDATOR - MARS AE2612 - U5M - MDB -
VALIDATOR - MAKA - NB - 1KB - 400 WITH MASK "K" INSTALLED
MDB VALIDATOR OPTIONS
HARNESS PART
(HARNESS)
NUMBER
15790285900193 VALIDATOR - MARS - S2000 - VN 2511 - U5E - CN5
9989718
(JUMPER)
1579006
TABLE 52 B. CARD READER OPTIONS
PART NUMBER DESCRIPTION
1475107 DEBITEK #VIS-MM-NAT SYSTEM III
1575050 BRACKET - DEBITEK CONTROLLER
64 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 52 C. COIN MECHANISM OPTIONS
PART NUMBER DESCRIPTION
5900116 MARS TRC6000 COIN UNIT 5307321 COINTRON 3000 - US COIN VAL 5900096 COINCO 9340L COIN UNIT 5900112 MARS MC5000 COIN UNIT 6400002 COIN CHANGER - MARS #TRC 6010XV 6400003 COIN CHANGER - COINCO # 9302LF-24 5900094 COINCO 9300L COIN UNIT 5900192 COIN UNIT - CONLUX USLX00401F 5900212 COIN UNIT - MARS TRC 6510 - MDB 5900213 COIN UNIT - COINCO - 9302 - GX - MDB 5900209 COIN UNIT - CONLUX - USLZ - 001 - MDB 5900214 COIN UNIT - MARS - VN 4510 - MDB 5900216 COIN UNIT - MARS - VN 4000, 110V 5900217 COIN UNIT - MARS - VN 4010 XV - 24V 5900192 COIN UNIT - CONLUX USLX 00401F 5900237 COIN UNIT - CONLUX USLX - 001 120V 1600851 MARS CASH FLOW - MDB - CHINA 5900240 COIN UNIT - C.F. MDB - CUSTOMER SUPPLIED
1590035 65 June, 1998
Snackvendor Models 159 - 160 Parts Manual
5
1
7
6
7
3 4
PRODUCT PUSHER
(Part Number 1477074)
2
8
9
13
12
11
10
1
Figure 26. Candy Tray Assembly (Part 1 of 2)
66 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 53. CANDY TRAY ASSEMBLY (PART 1 OF 2)
INDEX PART NUMBER DESCRIPTION QTY.
-
1 1477175
2 - SPIRAL (SEE TABLE 58 A FOR DETAILS) -
3 1477017 LATCH 2
4 5201267 PUSH ON RETAINER - .312 2
5
6 1477097 AXLE - TRAY ROLLER 2
7 1477148 ROLLER - TRAY 2
8 9900030
9 5560113
10 1477014
11
12
13 2222031
1597002 TRAY ASSEMBLY - 10 CANDY (SHOWN)
1607002 TRAY ASSEMBLY - 8 CANDY (NOT SHOWN)
WALL - TRAY (159) 9
WALL - TRAY (160) 7
1577040 TRAY - 5 & 10 DIVISION (159) 1587003 TRAY - 4 & 8 DIVISION (160)
NUT #8-32 SELF-LOCKING (159) 3
NUT #8-32 SELF-LOCKING (160) 2
WASHER - HOPPER RELEASE (159) 3
WASHER - HOPPER RELEASE (160) 2
ROLL - PRICE - CENTS (159) 10
ROLL - PRICE - CENTS (160) 8
1477157 HOLDER - PRICE & SELECTION (159) 1487016 HOLDER - PRICE & SELECTION (160) 1477134 RAIL - PRICE & SELECTION (159) 1487009 RAIL - PRICE & SELECTION (160)
TEE BOLT - TRIM (159) 3
TEE BOLT - TRIM (160) 2
1
1
1
1
1590035 67 June, 1998
Snackvendor Models 159 - 160 Parts Manual
Figure 27. Candy Tray Assembly (Part 2 of 2
68 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 54. CANDY TRAY ASSEMBLY (PART 2 OF 2
INDEX PART NUMBER DESCRIPTION QTY.
1
2 1577035
3 3502907 BUSHING 1
4 1477113
5 - SPIRALS (SEE TABLE 58 A FOR DETAILS) -
1599013 HARNESS - 10 MOTOR TRAY (159) 1 1599015 HARNESS - 4 MOTOR (160, 468, 490, 493) 1
MOTOR & PCB ASSEMBLY (159) 10
MOTOR & PCB ASSEMBLY (160) 8
COUPLING - SPIRAL (159) 10
COUPLING - SPIRAL (160) 8
1590035 69 June, 1998
Snackvendor Models 159 - 160 Parts Manual
1
7
6
5
3 4
PRODUCT PUSHER
(Part Number 1477074)
2
8
9
13
12
11
10
159P0034
Figure 28. Snack Tray Assembly (Part 1 of 2)
70 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 55. SNACK TRAY ASSEMBLY (PART 1 OF 2)
INDEX PART NUMBER DESCRIPTION QTY.
-
1 - SPIRAL (SEE TABLE 58 A FOR DETAILS) -
2 1477175
3 1477017 LATCH 2
4 5201267 PUSH ON RETAINER - .312 2
5
6 1477097 AXLE - TRAY ROLLER 2
7 1477148 ROLLER - TRAY 2
8 9900030
9 5560113
10 1477014
11
12
13 2222031
1597001 TRAY ASSEMBLY - 5 SNACK (159) (SHOWN) 1607001 TRAY ASSEMBLY - 4 SNACK (160) (NOT SHOWN)
WALL - TRAY (159) 4
WALL - TRAY (160) 3
1577040 TRAY - 5 & 10 DIVISION (159) 1587003 TRAY - 4 & 8 DIVISION (160)
NUT #8-32 SELF-LOCKING (159) 3
NUT #8-32 SELF-LOCKING (160) 2
WASHER - HOPPER RELEASE (159) 3
WASHER - HOPPER RELEASE (160) 2
ROLL - PRICE - CENTS (159) 5
ROLL - PRICE - CENTS (160) 4
1477157 HOLDER - PRICE & SELECTION (159) 1487016 HOLDER - PRICE & SELECTION (160) 1477134 RAIL - PRICE & SELECTION (159) 1487009 RAIL - PRICE & SELECTION (160)
TEE BOLT - TRIM (159) 3
TEE BOLT - TRIM (160) 2
1
1
1
1
1590035 71 June, 1998
Snackvendor Models 159 - 160 Parts Manual
Figure 29. Snack Tray Assembly (Part 2 of 2)
72 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 56. SNACK TRAY ASSEMBLY (PART 2 OF 2)
INDEX PART NUMBER DESCRIPTION QTY.
1
2 1577035
3 3502097 BUSHING 1
4 1477022
5 1477113
6 - SPIRALS (SEE FIGURE 58 A FOR DETAILS) -
7 1477020
1599012 HARNESS - 5 MOTOR TRAY (159) 1599014 HARNESS - 4 MOTOR TRAY (160)
MOTOR & PCB ASSEMBLY (159) 5
MOTOR & PCB ASSEMBLY (160) 4
BEARING - COUPLER (159) 5
BEARING - COUPLER (160) 4
COUPLING - SPIRAL (159) 10
COUPLING - SPIRAL (160) 8
GEAR - TRAY (159) 10
GEAR - TRAY (160) 8
1
1590035 73 June, 1998
Snackvendor Models 159 - 160 Parts Manual
Figure 30. Gum and Mint Tray Assembly (Part 1 of 2)
74 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 57. GUM AND MINT TRAY ASSEMBLY (PART 1 OF 2)
INDEX PART NUMBER DESCRIPTION QTY.
-
1 1477175
2 - SPIRAL (SEE TABLE 58 A FOR DETAILS) -
3 1477017 LATCH 2
4 5201267 PUSH ON RETAINER - .312 2
5
6 1477097 AXLE - TRAY ROLLER 2
7 1477148 ROLLER - TRAY 2
8 9900030
9 5560113
10 1477014
11
12
13 2222031
14 1467127 15 1467131 SPIRAL INSERT ASSEMBLY 1
16 1467129 DISC - SPIRAL INSERT 1 17 1467136 CAP - SPIRAL INSERT 2 18 1467130 DISC - SPIRAL INSERT 1
19 1467137 RETAINER - SPIRAL - ORANGE 1
20 1467128 SPIRAL - 2.65 DIAMETER - DUAL GUM & MINT 1
1597003 TRAY ASSEMBLY - 8 CANDY - 2 GUM (159) (SHOWN) 1607003 TRAY ASSEMBLY - 6 CANDY - 2 GUM (160) (NOT SHOWN)
WALL - TRAY (159) 9
WALL - TRAY (160) 7
1577040 TRAY - 5 & 10 DIVISION (159) 1
1587003 TRAY - 4 & 8 DIVISION (160) 1
NUT #8-32 SELF-LOCKING (159) 3
NUT #8-32 SELF-LOCKING (160) 2
WASHER - HOPPER RELEASE (159) 3
WASHER - HOPPER RELEASE (160) 2
ROLL - PRICE - CENTS (159) 10
ROLL - PRICE - CENTS (160) 8
1477157 HOLDER - PRICE & SELECTION (159) 1487016 HOLDER - PRICE & SELECTION (160) 1477134 RAIL - PRICE & SELECTION (159) 1487009 RAIL - PRICE & SELECTION (160)
TEE BOLT - TRIM (159) 3
TEE BOLT - TRIM (160) 2
SPIRAL ASSEMBLY - DUAL GUM & MINT (INCLUDES INDEX NUM­BERS 15 - 20)
1
1
1
2
1590035 75 June, 1998
Snackvendor Models 159 - 160 Parts Manual
SEE
DETAIL A
4
1
3
6
DETAIL A
2
7
159P0038
Figure 31. Gum and Mint Tray Assembly (Part 2 of 2)
76 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 58. GUM AND MINT TRAY ASSEMBLY (PART 2 OF 2)
INDEX PART NUMBER DESCRIPTION QTY.
1 1599013 HARNESS - 10 MOTOR TRAY 1
2 1577035
3 1477114 MOTOR & PCB ASSEMBLY (159, 160) 2
4 3502097 BUSHING 1
5 1477156 JUMPER ASSEMBLY - MOTOR REVERSING 1
6 1477113
7 - SPIRALS (SEE FIGURE 58 A FOR DETAILS) -
MOTOR & PCB ASSEMBLY (159) 8
MOTOR & PCB ASSEMBLY (160) 6
COUPLING - SPIRAL (159) 10
COUPLING - SPIRAL (160) 8
TABLE 58 A. SPIRAL OPTIONS
PART NUMBERS
LEFT HAND RIGHT HAND
Spiral
Count
5 - - - 1477178 - 1477179
6PURPLE1477107 1477103 1477102 1477105 1477104
9GRAY1477155 1477149 1477150 1477152 1477153 11 BLUE 1457061 1477023 1477024 1477026 1477027 13 YELLOW 145706 2 1477029 1477030 1477032 147703 3 15 RED 1457063 1477035 1477063 1477038 1477039 17 BROWN 1477106 1477101 1477100 1477099 1477098 20 WHITE 1457064 1477041 1477042 1477044 1477045 25 GREEN 1457065 1477047 1477048 1477050 1477051 30 BLACK 1477073 1477053 1477054 1477056 1477057 38 ORANGE 1467137 1477059 1477060 1477062 1477063
Retainer Color Retainer Assembly Spiral Assembly Spiral
1590035 77 June, 1998
Snackvendor Models 159 - 160 Parts Manual
Figure 32. Base Plate Assembly
78 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 59. BASE PLATE ASSEMBLY
INDEX PART NUMBER DESCRIPTION QTY.
1 9900098 COTTER PIN, 3/32 2 2 6231087 BRACKET - BASE PLATE 2 3 1411194 SLIDE - BASE PLATE - RIGHT HAND 1
4
5 1411195 SLIDE - BASE PLATE - LEFT HAND 1
1581023 BASE PLATE ASSEMBLY (160) 2271408 BASE PLATE ASSEMBLY (159)
1
1590035 79 June, 1998
Snackvendor Models 159 - 160 Parts Manual
The wiring harness illustrations that follow should be used along with the wire dia­gram for your merchandiser.
POWER PANEL TO EXHAUST FAN JUMPER
J137 J83
TO
OPTIONAL
EXHAUST
FAN
TO
EXECUTIVE
COIN MECH
JUMPER
(9989712)
TO
INTERFACE
PCB
J93A
J61
24VAC PCB & COIN POWER HARNESS
J81
J37
J38
TO
POWER
PAN EL
TO
POWER
PANEL
TO
CONTROLLER
PCB
9989750
16 CONDUCTOR RIBBON CABLE
TO
INTERFACE
PCB
80 1590035
J55 J30
TO
CONTROLLER
PCB
1579008
Figure 33. Wiring Harnesses (Part 1 of 10)
June, 1998
Snackvendor Models 159 - 160 Parts Manual
JUMPER GUM & MINT INTERFACE
J121 J58
TO
GUM&MINT
HARNESS
(1579012)
TO
DOOR
WITCH
TO
SNACK
INTERFACE
PCB
MONETARY DOOR SWITCH JUMPER
J48J100
TO
DISPLAY
PCB
1579009
Figure 33. Wiring Harnesses (Part 2 of 10)
1590035 81 June, 1998
Snackvendor Models 159 - 160 Parts Manual
POWER PANEL TO FLUORESCENT LIGHT JUMPER
J82 J133
TO
POWER
PANEL
TO
FLUORESCENT
LIGHT FILTER
Figure 33. Wiring Harnesses (Part 3 of 10)
82 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
SMALL SNACK FLUORESCENT LIGHT HARNESS
DEX PRINTER INTERFACE HARNESS
J36
TO
CONTROLLER
PCB
TO
PRINTER
Figure 33. Wiring Harnesses (Part 4 of 10)
1590035 83 June, 1998
TO
MAIN
SWITCH
TO
MAIN
SWITCH
Snackvendor Models 159 - 160 Parts Manual
EURO PLUG POWER CORD
J94
230V
A.C.
9985043
CORD SET POLARIZED-GROUNDED
J94
115V
A.C.
TABLE 60. LABELS USED WITH 9985043
PART NUMBER DESCRIPTION
9989526 LABEL - WARNING - POWER CORD - ENGLISH
9989583 LABEL - WARNING - POWER CORD - SPANISH
Figure 33. Wiring Harnesses (Part 5 of 10)
84 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
Figure 33. Wiring Harnesses (Part 6 of 10)
1590035 85 June, 1998
Snackvendor Models 159 - 160 Parts Manual
HARNESSES FOR COIN MECH OPTIONS
TO
COIN
MECH
TO 120 VOLT
VALIDATOR
POWER
24VAC
POWER
CONTROLLER
PCB
J101
J102
TO
TO
J93A
J27
COIN MECH HARNESS
EXECUTIVE COIN MECH JUMPER
J40
TO
CONTROLLER
PCB
J87
TO COIN
HANDLING
POWER HARNESS
(1579017)
J104B
TO EXEC MECH POWER
J151
TO EXEC MECH
1579003
9989712
Figure 33. Wiring Harnesses (Part 7 of 10)
86 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
4
E
L
HARNESSES FOR MDB COIN OPTIONS
MDB HARNESS
TO
MAIN
CONTROLLER
PCB
HARNESSES FOR SERIAL AND PULSE BILL VALIDATOR OPTIONS
J93A J93B
O
VAC
WER
J39 J200
TO MDB
COIN
HANDLING
24V VALIDATOR JUMPER
TO
EXEC
POWER
9989718
HARNESS - SERIAL VALIDATORS
-24 VOLTS
J41
Figure 33. Wiring Harnesses (Part 8 of 10)
1590035 87 June, 1998
J104
2
S
VA
Snackvendor Models 159 - 160 Parts Manual
HARNESSES FOR SERIAL AND PULSE BILL VALIDATOR OPTIONS (CONTINUED)
TO
VALIDATOR
TO
MAKA
PULSE
VALIDATOR
J104A
J104B
J103B
J103A
SERIAL VALIDATOR HARNESS
MAKA PULSE VALIDATOR HARNESS
J41
TO MAIN
CONTROLLER
PCB
J102
TO COIN MECH.
HARNESS
(1579003)
J42
CONTROLLER
J102
TO COIN
HARNESS
(1579003)
1579028
TO
PCB
MECH.
1579006
TO
MARS PULSE
VALIDATOR
J105
MARS PULSE VALIDATOR HARNESS
Figure 33. Wiring Harnesses (Part 9 of 10)
J42
CONTROLLER
J102
TO COIN
MECH.
HARNESS
(1579003)
TO
PCB
1579005
88 1590035
June, 1998
TO
MDB
VALIDATOR
Snackvendor Models 159 - 160 Parts Manual
HARNESSES FOR MDB VALIDATOR OPTIONS
MDB FOR COINCO BA30SA HARNESS
J3 J2
TO
MDB
J1
1579034
TO
NTROLLER
PCB
MDB FOR CONLUX MKA 2000 HARNESS
J36
ACCESSORIES
J200
TO
MDB
COIN
1579050
Figure 33. Wiring Harnesses (Part 10 of 10)
1590035 89 June, 1998
Snackvendor Models 159 - 160 Parts Manual
90 1590035
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 32.
INDEX PART NUMBER DESCRIPTION QUANTITY
1 1681058 DEFLECTOR - UPPER LHS - PLASTIC 1
2 2342044 CLIP - CHRISTMAS TREE 2
1700013 91 June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 33.
INDEX PART NUMBER DESCRIPTION QUANTITY
1 7971014 OVERLAY NON - REFL UPPER DEFLECTOR 1
1 7971015 OVERLAY NON - REFL LOWER PILFER DR 1
1 ‘7841017 OVERLAY NON - REFLECTIVE - 8 SELECT CAN
92 1700013
June, 1998
Snackvendor Models 159 - 160 Parts Manual
93 1700013
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 34.
INDEX PART NUMBER DESCRIPTION QUANTITY
1 1672044 COVER - PCB - RH 1
2 1672051 PAPER BACKING - RH. PCB 1
3 1726001 PCB ASSEMBLY - PRODUCT DET. - EMITTER - GPL 1
4 1672032 SENSOR BRACKET ASSEMBLY - RT 1
5 1672038 DEFLECTOR - INNER - RH - FLT “T” BLK 1
6 1452139 RETAINER HARNESS --
TABLE 35.
INDEX PART NUMBER DESCRIPTION QUANTITY
1 1672029 SENSOR BRACKET - ASSEMBLY - LT 1
2 1726000 PCB ASSEMBLY - PRODUCT DET. EMITTER - GPL 1
3 1672050 PAPER BACKING - LT. PCB 1
4 5262216 SCREW - #6 - 32 X 1/4” PPHD M SCR --
5 1672043 COVER - PCB LH 1
6 7970004 KIT - LOCK SOLENOID - FOOD MODULE 1
7 1672039 DEFLECTOR - INNER - LH FLT “T” BLK 1
94 1700013
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 36.
INDEX PART NUMBER DESCRIPTION QUANTITY
1 1672032 SENSOR BRACKET - ASSEMBLY - RT 1
2 1726000 PCB ASSEMBLY - PRODUCT DET. RECEIVER - GPL 1
3 1672051 PAPER BACKING - RT. PCB 1
4 5262216 SCREW #6 - 32 X 1/4” PPHD M SCR. --
5 7852000 COVER - PCB - RH (COFFEE MODULE ONLY) 1
6 7852001 DEFLECTOR - RT - PLASTIC (COFFEE MODULE ONLY) 1
95 1700013
June, 1998
Snackvendor Models 159 - 160 Parts Manual
TABLE 37.
INDEX PART NUMBER DESCRIPTION QUANTITY
1 4732024 RETAINER - HARNESS --
2 1679012 HARNESS - MAIN CONTROLLER TO SENSOR 1
3 1679013 HARNESS - EMITTER TO DETECTOR 1
96 1700013
June, 1998
Snackvendor Models 159 - 160 Parts Manual
Supplement to 1590050: posi-vend™ Opera t ion
This document will explain the operation and usage of the posi-vend™ guaranteed product deliv­ery system for GPL spiral vendors. A series of “electric eyes” is mounted on the delivery pan. When a product drops into the delivery pan, it br eaks the beam of the “electric eye”, telling the controller that a product has been delivered. If a selection is made and the spiral makes one com­plete revolution without delivering a product, the controller will command the spiral to turn until a product is delivered, up to three times. After that, the customer’s money is refunded.
Your posi-vend™ guaranteed product delivery system is completely factory set, with no user pro­grammable functions. However, some additional diagnostic messages may appear if there is a malfunction in the system.
If the posi-vend™ PCB is not working properly, or a main delivery area is blocked, or the posi­vend™ PCB is not detected by the controller, all posi-vend™ functions are ignored and the mer­chandiser reverts to normal home switch operation.
Note:
A blocked gum & mint posi-vend™ sensor does not affect the status of posi-vend™ for snack tray selections.
A blocked gum & mint posi-vend™ sensor will cause the merchandiser to revert to home switch operation for food module selections.
Motor Operation Under posi-vend™
If posi-vend™ is working the motor will stop at the home switch position if the spiral has gone less than one revolution without passing home when the product is detected.
If posi-vend™ is working the motor will stop immediately when a product is detected provided the motor has gone past home at least one time. The motor will temporarily pause at each home switch position before continuing. (See can and gum&mint exceptions.)
If posi-vend™ is working but product delivery is not detected, the motor will stop the third time it enters the home switch position. The vend fails and credit is returned.
Gum & Mint vends are not complete until the product is detected then leaves the posi-vend™ sen­sor path. This protects against products jamming in the gum & mint delivery area.
Can selections will attempt only one vend before failing if product is not detected. Any selection that fails under posi-vend™ will be put out-of-service and will generate an
diagnostic as described below. These out-of-service conditions apply even if posi-vend™ subse­quently becomes non-operational. These out-of-service conditions are automatically reset at time-of-service based upon the closure of the main door.
If ten selections go home switch operation until the main door is opened and closed.
97 1700013
$,/38
posi-vend™ will enter its anti-jackpot mode and all motors revert to
$,/38
June, 1998
Snackvendor Models 159 - 160 Parts Manual
posi-vend™ Diagnostics
The following diagnostics may appe ar in the diagnostic list:
/.2(5#U
"x" = "H" for the gum & mint sensor. Press H to see the realtime calibration values
/.2(5#" +
ues. The display will show the real-time calibration values for each of the 10 posi-vend™ zones. These are generally grouped in pairs corresponding to the emitter under test. The calibration determines the minimum amount of intensity from the posi-vend™ infrared emitters that is needed for detection. A safety margin of 3) is added and is displayed. Interpret "A" - "F" as the numbers "10" - "15".
1. A value of "0" indicates the detector is shorted and is a fatal error;
2. A value of "1" indicates the detector cannot see the emitter within the allowable calibration val­ues;
3. Values "2" through "9" are normal;
4. Values above "9" may indicate dirty or misaligned sensors.
5. Values that change by more than a magnitude of 2 may indicate mechanical problems with the posi-vend™ alignment or dirty sensors.
$,/38>>
diagnostic will be cleared when the main door closes. Those selections will be returned to ser­vice. This data is an indication of the number of posi-vend™ failures which returned the cus­tomer's credit.
if posi-vend™ detects a blockage of LED "x" counted from the front of the machine.
if posi-vend™ detects a calibration error. Press H to see the realtime calibration val-
is shown when posi-vend™ did not detect product delivery from selection "aa". This
/.2(5#.%%%.1 -3()/
posi-vend™ is disabled and operation reverts to home switches until the main door closes.
98 1700013
is shown if 10 selections go
$,/38
since the last main door closure.
June, 1998
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use