Craftsman 486.24623 User Manual
Owner's Manual
TRACTOR BRUSH GUARD
Model No*s. 486.246211, 486.24622 & 486.24623
CAUTION:
Before using this product, read
this manual and follow all Safety
Rules and
Operating Instructions.
IMPORTANT = READ THIS FIRST!!!
For Missing Parts or Assembly Questions
Please Call 866-576-8388
Mon.-Fri. 7 am - 5 pm CST
FAX 217-728-2032 or e-mail info@agri-fab.com
Missing parts will be sent UPS in 24 hours directly to your home.
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
WWW. sea rs. com/c rafts ma n
PRINTED IN U.S.A.
• Safety
• Assembly
• Operation
• Maintenance
• Parts
FORM NO. 49695 (1/05)
A
J
Any powerequipmentcan cause injury if operated improperly
or if the user does not understand how to operate the
equipment. Exercise caution at all times, when using power
equipment.
• Refer to your tractor owners manual for "Rules For
Safe Operation".
Look for this symbol to point out important safety
A
precautions. It means-Attention!! Become
alert!! Your safety is Involved.
TOOLS REQUIRED
(1) 9/16" Wrench
(1) 1/2" Wrench (for heat shields)
CAUTIONI Muffler is hot! Allow engine to
cool down before proceeding with bumper
A
installation.
STEP1: (SEE FIGURE 1)
• Place cardboard on work surface to protect painted
parts from scratches.
• Remove hood from tractor using instructions in your
tractor owner's manual. Place hood on cardboard or
on a mat to protect paint.
• If your tractor has a heat shield shaped like the one in
figure 1, temporarily remove it.
IMPORTANT: Be sure to reattach the heat shield after
bumper is installed.
Ref. Part No. Qty. Description
A 48894 2 Self Threading Screw, 3/8-16 x 1-1/2'
B 43062 2 Hex Bolt, 3/8-16x1-1/2"
C 43001 2 Hex Bolt, 3/8-16x1"
D 44742 4
E 48866 2 Pivot Spacer
F 1643-60 2 Plastic Grip
G 43070 4 Washer, 3/8"
H 43003 4 Lock Washer, 3/8"
1. Left Mounting Bracket
2. Right Mounting Bracket
3. Locking Lever
4. Bumper
Plug
#25037
#25038
#64862
#646146 (71-246211)
#646145 (71-24622)
#646140 (71-24623)
STEP 2: (SEE FIGURE 2)
• Place plug (D) on a work bench or solid table and
push end of bumper down onto plug. Repeat for all
four plugs.
Loading...