NORDIC CCU0150 SERIES
UNDER COUNTER CUBED ICE MAKER
FEATURES
High-yield – Produces up to 174 lbs. (79 Kgs.) of ice/day
Storage – 100 lbs. (45 Kgs.) built-in application storage
Antimicrobial – Built-in Agion Antimicrobial product protection effective against mold, mildew, and fungus
Small footprint – Ultra low-profile - only 39" (991 mm) tall and 34" (605 mm) wide
Durable – Rotomolded exterior cladding
Easy access – Large bin door opening
Customizable – Adjustable leg height
Agion is a trademark of Agion Technologies, Wakefield, MA.
Protected by Agion
24" (610 mm)
24" (610 mm)
17 1/2" (444 mm)
Electrical Inlet
7/8" (22 mm) D Hole
16 3/8" (416 mm)
2 5/8" (67 mm)
Icemaker — Water IN
1/4" (6 mm) Male Flare
33"
(838 mm)
23 5/8"
(600 mm)
6" (152 mm) to 7" (178 mm)
Adjustable Legs
Air Out -
Left Front
of icemaker
(610 mm)
24"
24"
39"
(991 mm)
Air In Right Front
of icemaker
Water Used-Gals. (Ltrs.)
Ice Prod.
per 24 hrs.
at 70° Air /
Cond.
MODEL NO.
CCU0150A*11
* Represents cube size. For full cube substitute an “F”, for half cube substitute an “H”.
Please note: air-cooled units require 6” (152 mm) clearance for air intake and exhaust.
Note #1: Application bin storage is 100 lbs. (45 Kgs.) = 90% of Internal Volume x 34 lbs. per cubic foot
Note #2: ARI bin storage is 74 lbs. (34 Kgs.) = 80% of Internal Volume x 30 lbs. per cubic foot
1. 90°/70° figures are rated in accordance with ARI Standard 810.
Unit
Air 174 (79) 112 (51) 34 n/a 11.8 3572 115/60/1 9.7
50° Water
lbs. (Kgs.)
Ice Prod.
per 24 hrs.
at 90° Air /
70° Water
lbs. (Kgs.)
per 100 lbs. of ice 90°
Air / 70° Water
Ice Prod.
Use Cond. Use
32" (813 mm)
4 3/16"
(106 mm)
Kilowatts
Used per
100 lbs.
of ice 90°
Air / 70°
Water
1 7/16" (37mm)
3/4"
(19 mm)
(152 mm)
(229 mm)
Heat
Rejection
(Btuh)
Bin Drain
9/16" (14 mm) I.D. hose
Icemaker Drain
9/16" (14 mm) I.D. hose
6"
9"
30 1/16"
(764 mm)
Water Condenser — Water OUT
3/4" (19 mm) FPT
Water Cooled Units Only
Water Condenser — Water IN
3/8" (10 mm) FPT
Water Cooled Units Only
Electrical
Rating
Min.
Circuit
Amp.
OPERATING LIMITS
Ambient Temp. Range Air & Water 50° - 100°F (10° - 38°C)
Water Temp. Range 40° - 100°F (4.5° - 38°C)
Water Pressure Ice Maker Water in
Condenser Inlet Water
(Water cooled only)
Min. 20 psi (1.4 bar)
Max. 60 psi (4.1 bar)
Min. 20 psi (1.4 bar)
Max. 60 psi (4.1 bar)
TECHNICAL SPECIFICATIONS
NUMBER OF WIRES ........... 3
MAX. FUSE SIZE .............. 15
SHIPPING WEIGHT LBS (KGS.) .. 160 (73)
AGENCY LISTINGS ............
Cube Size: Width Depth Heigth
Full 7/8" (22mm) 7/8" (22mm) 7/8" (22mm)
Half 3/8" (10mm) 7/8" (22mm) 7/8" (22mm)
© 2016 CORNELIUS
CG5053-0516
IN THE U.S.A.
Ph: 800.238.3600
Fax: 800.258.0255
For more information or to place an order, contact your sales representative or authorized distributor.
OUTSIDE THE U.S.A.
Ph: 763.488.8200
Email: webmaster@cornelius.com
101 Broadway Street West
Osseo, MN 55369
www.cornelius.com